Give due credit

Add -D flag to print timestamp in front of output lines.

.gitignore

@@ -0,0 +1,24 @@
+.*.swp
+*.tar.gz
+*~
+.deps
+Makefile
+Makefile.in
+aclocal.m4
+autom4te.cache
+config.guess
+config.h
+config.h.in
+config.log
+config.status
+config.sub
+configure
+depcomp
+install-sh
+missing
+src/*.o
+src/fping
+src/fping6
+stamp-h1
+doc/fping.8
+doc/fping6.8

ChangeLog

@@ -1,15 +1,88 @@
-Thu Dec 28 2011
-David Schweikert <david@schweikert.ch>
-- Revision v3.0
+2013-11-08  David Schweikert  <david@schweikert.ch>
+  * Version 3.8
+  * Fix segmentation fault introduced in version 3.7 with loop mode (reported
+    by Vlad Glagolev, #55)
+
+2013-11-04  David Schweikert  <david@schweikert.ch>
+  * Version 3.7
+  * Allow running as non-root on Mac OS X by using non-privileged ICMP (#7)
+  * Remove unnecessary IPv6 socket options
+  * Fix again compatibility issue with FreeBSD (Shawn Chu)
+  * Fix fping hanging forever on permanent sendto failure (Shawn Chu)
+  * Fix duplicate echo reply packets causing early stop in count mode
+    (reported by Ramon Schwammberger, #53)
+
+2013-10-10  David Schweikert  <david@schweikert.ch>
+  * Version 3.6
+  * Fix loop issue after 65536 pings (reported by Peter Folk and GBert, #12)
+  * Minimum ping data size is now 0
+  * Removed setsockopt IPV6_CHECKSUM, which shouldn't be set and breaks
+    compiling on Solaris (reported by Juergen Arndt)
+  * Fix wrong min RTT value with -Q option (reported by Alexander Ivanov, #51)
+
+2013-05-22  David Schweikert  <david@schweikert.ch>
+  * Version 3.5
+  * Fix sprint_tm buffer size crash (reported by Japheth Cleaver)
+  * Addded -D flag to print timestamps (Toke Høiland-Jørgensen)
+  * Fix fping6 build on OS X 10.8 (unknown contributor)
+  * Fix compatibility issue with FreeBSD (Alexandre Raynaud, Jason Harris, #39)
+  * Fping.spec: fix setuid permissions and provides fping6 (Marcus Vinicius Ferreira)
+  * Re-create configure script with autoconf 2.69 for aarch64 support (Chuck Anderson, #45)
+
+2012-09-04  David Schweikert  <david@schweikert.ch>
+  * Version 3.4
+  * Revert "Output statistics to stdout instead of stderr", because it breaks
+    tools assuming the output goes to stderr
+
+2012-08-19  David Schweikert  <david@schweikert.ch>
+  * Version 3.3
+  * Do not output icmp errors with -q (#1)
+  * Add --enable-ipv4 and --enable-ipv6 options to configure (Niclas Zeising)
+  * Fix removing of unreachable hosts when doing loop (Thomas Liske, #13 #23)
+  * Fix -A for fping6 (reported by Matt LaPlante, #14)
+  * Fix "options inet6" breaking IPv4 name resolution (reported by Matt LaPlante, #17)
+  * Output statistics to stdout instead of stderr (suggested by Simon Leinen, #9)
+  * Set default data size to 56 bytes on all architectures (#18)
+  * Added contrib/fping.spec (Stephen Schaefer, #24)
+  * Convert man-page source to POD for easier maintenance
+  * Fix error message on DNS error for IPv6 hosts (#27)
+  * Fix -n flag in fping6 (#28)
+  * Man-page fix: TOS option typo (Thomas Liske, #23)
+  * Man-page fix: inconsistency in regards to numeric arguments (Robert Henney)
+  * Man-page fix: better description of option -q (#15)
+
+2012-05-29  David Schweikert  <david@schweikert.ch>
+  * Version 3.2
+  * Improve documentation for -g option (G.W. Haywood)
+  * Performance optimization for big select timeouts (#10, Andrey Bondarenko)
+  * Fix restart of select call after interrupt signal (#8, Boian Bonev)
+  * Fix infinite loop caused by linked list corruption (#11, Boian Bonev)
+
+2012-04-26  David Schweikert  <david@schweikert.ch>
+  * Version 3.1
+  * -g option (generate): exclude network and broadcast address for cidr
+    ranges (idea by Eric Brander)
+  * do not explicitely check if running as root, to make it possible to
+    install fping with linux capabilities instead of making it setuid
+    (setcap cap_net_raw+ep fping)
+  * ANSI C (C89) compiler now a requirement
+  * Portability fixes
+  * Reorganized source directory
+  * Bugfix: fix timeout issue on Solaris (Sandor Geller)
+  * Man-page fixes (Axel Beckert)
+  * Added -H option to specify number of hops (Paul Duda)
+  * Output usage information to stdout when called with -h (Paul Duda)
+
+2011-12-28  David Schweikert  <david@schweikert.ch>
+  * Version 3.0
   * rewritten main loop for improved performance
   * -T parameter (select timeout) now obsolete
   * Maintenance taken over from unresponsive previous maintainer
     (anybody please step up, if you disagree)
   * New homepage: www.fping.org
 
-Mon Dec 21 2009
-Tobi Oetiker <tobi@oetiker.ch>
-- Revision v2.4b2-to3-ipv6
+2009-12-21  Tobi Oetiker  <tobi@oetiker.ch>
+  * Version v2.4b2-to3-ipv6
   * added -On option to set the TOS octet
   * Removed unused variables from code
   * updated to current autoconf standards
@@ -17,6 +90,14 @@ Tobi Oetiker <tobi@oetiker.ch>
   
 ----------------------------------------------------------------------
 
+fping (2.4b2-to-ipv6-16.1) unstable; urgency=low
+
+  * NMU during Moenchengladbach BSP
+  * Fixes FTBFS on kfreebsd (Closes: #555398)
+  * Fixes typo "Paramter" in binary
+
+ -- Axel Beckert <abe@deuxchevaux.org>  Sat, 23 Jan 2010 16:22:02 +0100 
+
 fping (2.4b2-to-ipv6-16) unstable; urgency=low
 
   * Fix the following bugs

INSTALL

@@ -3,6 +3,8 @@ Basic Installation
 
    These are generic installation instructions.
 
+   --> See the README file for fping-specific instructions. <--
+
    The `configure' shell script attempts to guess correct values for
 various system-dependent variables used during compilation.  It uses
 those values to create a `Makefile' in each directory of the package.
@@ -173,13 +175,3 @@ operates.
      script, and exit.
 
 `configure' also accepts some other, not widely useful, options.
-
-
-Problems and Notes
-==================
-
-Apr 2001
-- Making fping requires 'm4' and 'autoheader'
-- fping is known not to build on Solaris. (Solaris lacks 'autoheader')
-- fping has been reported to bug out if a file contains more than 3600 addresses to scan.
-- If you are having problems compiling, try an earlier version (2.2b2 for example)

Makefile.am

@@ -1,5 +1 @@
-sbin_PROGRAMS = fping
-fping_SOURCES = fping.c options.h
-man_MANS = fping.8
-AUTOMAKE_OPTIONS=foreign
-EXTRA_DIST = $(man_MANS) autogen.sh
+SUBDIRS = doc src

Makefile.in

@@ -1,710 +0,0 @@
-# Makefile.in generated by automake 1.11.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
-# Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-target_triplet = @target@
-sbin_PROGRAMS = fping$(EXEEXT)
-subdir = .
-DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
-	$(srcdir)/Makefile.in $(srcdir)/config.h.in \
-	$(top_srcdir)/configure COPYING ChangeLog INSTALL acconfig.h \
-	config.guess config.sub depcomp install-sh missing \
-	mkinstalldirs
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno config.status.lineno
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-PROGRAMS = $(sbin_PROGRAMS)
-am_fping_OBJECTS = fping.$(OBJEXT)
-fping_OBJECTS = $(am_fping_OBJECTS)
-fping_LDADD = $(LDADD)
-DEFAULT_INCLUDES = -I.@am__isrc@
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
-	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-SOURCES = $(fping_SOURCES)
-DIST_SOURCES = $(fping_SOURCES)
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-am__remove_distdir = \
-  { test ! -d "$(distdir)" \
-    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
-         && rm -fr "$(distdir)"; }; }
-DIST_ARCHIVES = $(distdir).tar.gz
-GZIP_ENV = --best
-distuninstallcheck_listfiles = find . -type f -print
-distcleancheck_listfiles = find . -type f -print
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target = @target@
-target_alias = @target_alias@
-target_cpu = @target_cpu@
-target_os = @target_os@
-target_vendor = @target_vendor@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-fping_SOURCES = fping.c options.h
-man_MANS = fping.8
-AUTOMAKE_OPTIONS = foreign
-EXTRA_DIST = $(man_MANS) autogen.sh
-all: config.h
-	$(MAKE) $(AM_MAKEFLAGS) all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .o .obj
-am--refresh:
-	@:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
-	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
-		&& exit 0; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    echo ' $(SHELL) ./config.status'; \
-	    $(SHELL) ./config.status;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	$(am__cd) $(srcdir) && $(AUTOCONF)
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-$(am__aclocal_m4_deps):
-
-config.h: stamp-h1
-	@if test ! -f $@; then \
-	  rm -f stamp-h1; \
-	  $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
-	else :; fi
-
-stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
-	@rm -f stamp-h1
-	cd $(top_builddir) && $(SHELL) ./config.status config.h
-$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) $(top_srcdir)/acconfig.h
-	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
-	rm -f stamp-h1
-	touch $@
-
-distclean-hdr:
-	-rm -f config.h stamp-h1
-install-sbinPROGRAMS: $(sbin_PROGRAMS)
-	@$(NORMAL_INSTALL)
-	test -z "$(sbindir)" || $(MKDIR_P) "$(DESTDIR)$(sbindir)"
-	@list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
-	for p in $$list; do echo "$$p $$p"; done | \
-	sed 's/$(EXEEXT)$$//' | \
-	while read p p1; do if test -f $$p; \
-	  then echo "$$p"; echo "$$p"; else :; fi; \
-	done | \
-	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
-	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
-	sed 'N;N;N;s,\n, ,g' | \
-	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
-	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
-	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
-	    else { print "f", $$3 "/" $$4, $$1; } } \
-	  END { for (d in files) print "f", d, files[d] }' | \
-	while read type dir files; do \
-	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
-	    test -z "$$files" || { \
-	      echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
-	      $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
-	    } \
-	; done
-
-uninstall-sbinPROGRAMS:
-	@$(NORMAL_UNINSTALL)
-	@list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
-	files=`for p in $$list; do echo "$$p"; done | \
-	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
-	      -e 's/$$/$(EXEEXT)/' `; \
-	test -n "$$list" || exit 0; \
-	echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \
-	cd "$(DESTDIR)$(sbindir)" && rm -f $$files
-
-clean-sbinPROGRAMS:
-	-test -z "$(sbin_PROGRAMS)" || rm -f $(sbin_PROGRAMS)
-fping$(EXEEXT): $(fping_OBJECTS) $(fping_DEPENDENCIES) 
-	@rm -f fping$(EXEEXT)
-	$(LINK) $(fping_OBJECTS) $(fping_LDADD) $(LIBS)
-
-mostlyclean-compile:
-	-rm -f *.$(OBJEXT)
-
-distclean-compile:
-	-rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fping.Po@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
-install-man8: $(man_MANS)
-	@$(NORMAL_INSTALL)
-	test -z "$(man8dir)" || $(MKDIR_P) "$(DESTDIR)$(man8dir)"
-	@list=''; test -n "$(man8dir)" || exit 0; \
-	{ for i in $$list; do echo "$$i"; done; \
-	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
-	  sed -n '/\.8[a-z]*$$/p'; \
-	} | while read p; do \
-	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; echo "$$p"; \
-	done | \
-	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
-	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
-	sed 'N;N;s,\n, ,g' | { \
-	list=; while read file base inst; do \
-	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
-	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
-	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
-	  fi; \
-	done; \
-	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
-	while read files; do \
-	  test -z "$$files" || { \
-	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
-	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
-	done; }
-
-uninstall-man8:
-	@$(NORMAL_UNINSTALL)
-	@list=''; test -n "$(man8dir)" || exit 0; \
-	files=`{ for i in $$list; do echo "$$i"; done; \
-	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
-	  sed -n '/\.8[a-z]*$$/p'; \
-	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
-	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
-	test -z "$$files" || { \
-	  echo " ( cd '$(DESTDIR)$(man8dir)' && rm -f" $$files ")"; \
-	  cd "$(DESTDIR)$(man8dir)" && rm -f $$files; }
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	mkid -fID $$unique
-tags: TAGS
-
-TAGS:  $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	set x; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: CTAGS
-CTAGS:  $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
-	@list='$(MANS)'; if test -n "$$list"; then \
-	  list=`for p in $$list; do \
-	    if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
-	    if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
-	  if test -n "$$list" && \
-	    grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
-	    echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
-	    grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/         /' >&2; \
-	    echo "       to fix them, install help2man, remove and regenerate the man pages;" >&2; \
-	    echo "       typically \`make maintainer-clean' will remove them" >&2; \
-	    exit 1; \
-	  else :; fi; \
-	else :; fi
-	$(am__remove_distdir)
-	test -d "$(distdir)" || mkdir "$(distdir)"
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-	-test -n "$(am__skip_mode_fix)" \
-	|| find "$(distdir)" -type d ! -perm -755 \
-		-exec chmod u+rwx,go+rx {} \; -o \
-	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
-	|| chmod -R a+r "$(distdir)"
-dist-gzip: distdir
-	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
-
-dist-bzip2: distdir
-	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
-	$(am__remove_distdir)
-
-dist-lzma: distdir
-	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
-	$(am__remove_distdir)
-
-dist-xz: distdir
-	tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
-	$(am__remove_distdir)
-
-dist-tarZ: distdir
-	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
-	$(am__remove_distdir)
-
-dist-shar: distdir
-	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
-	$(am__remove_distdir)
-
-dist-zip: distdir
-	-rm -f $(distdir).zip
-	zip -rq $(distdir).zip $(distdir)
-	$(am__remove_distdir)
-
-dist dist-all: distdir
-	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	case '$(DIST_ARCHIVES)' in \
-	*.tar.gz*) \
-	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
-	*.tar.bz2*) \
-	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
-	*.tar.lzma*) \
-	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
-	*.tar.xz*) \
-	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
-	*.tar.Z*) \
-	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
-	*.shar.gz*) \
-	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
-	*.zip*) \
-	  unzip $(distdir).zip ;;\
-	esac
-	chmod -R a-w $(distdir); chmod a+w $(distdir)
-	mkdir $(distdir)/_build
-	mkdir $(distdir)/_inst
-	chmod a-w $(distdir)
-	test -d $(distdir)/_build || exit 0; \
-	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
-	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
-	  && am__cwd=`pwd` \
-	  && $(am__cd) $(distdir)/_build \
-	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
-	    $(DISTCHECK_CONFIGURE_FLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
-	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
-	        distuninstallcheck \
-	  && chmod -R a-w "$$dc_install_base" \
-	  && ({ \
-	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
-	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
-	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
-	  && rm -rf "$$dc_destdir" \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist \
-	  && rm -rf $(DIST_ARCHIVES) \
-	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
-	  && cd "$$am__cwd" \
-	  || exit 1
-	$(am__remove_distdir)
-	@(echo "$(distdir) archives ready for distribution: "; \
-	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
-	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
-distuninstallcheck:
-	@$(am__cd) '$(distuninstallcheck_dir)' \
-	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
-	   || { echo "ERROR: files left after uninstall:" ; \
-	        if test -n "$(DESTDIR)"; then \
-	          echo "  (check DESTDIR support)"; \
-	        fi ; \
-	        $(distuninstallcheck_listfiles) ; \
-	        exit 1; } >&2
-distcleancheck: distclean
-	@if test '$(srcdir)' = . ; then \
-	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
-	  exit 1 ; \
-	fi
-	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
-	  || { echo "ERROR: files left in build directory after distclean:" ; \
-	       $(distcleancheck_listfiles) ; \
-	       exit 1; } >&2
-check-am: all-am
-check: check-am
-all-am: Makefile $(PROGRAMS) $(MANS) config.h
-installdirs:
-	for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-sbinPROGRAMS mostlyclean-am
-
-distclean: distclean-am
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-	-rm -f fping.plist
-	-rm -rf autom4te.cache
-
-distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-hdr distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-sbinPROGRAMS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	-rm -rf $(top_srcdir)/autom4te.cache
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinPROGRAMS
-
-uninstall-man: uninstall-man8
-
-.MAKE: all install-am install-strip
-
-.PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
-	clean-generic clean-sbinPROGRAMS ctags dist dist-all \
-	dist-bzip2 dist-gzip dist-lzma dist-shar dist-tarZ dist-xz \
-	dist-zip distcheck distclean distclean-compile \
-	distclean-generic distclean-hdr distclean-tags distcleancheck \
-	distdir distuninstallcheck dvi dvi-am html html-am info \
-	info-am install install-am install-data install-data-am \
-	install-dvi install-dvi-am install-exec install-exec-am \
-	install-html install-html-am install-info install-info-am \
-	install-man install-man8 install-pdf install-pdf-am install-ps \
-	install-ps-am install-sbinPROGRAMS install-strip installcheck \
-	installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-compile \
-	mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \
-	uninstall-am uninstall-man uninstall-man8 \
-	uninstall-sbinPROGRAMS
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:

README

@@ -5,60 +5,48 @@ but much better performing when pinging multiple hosts. fping has a long long
 story: Roland Schemers did publish a first version of it in 1992 and it has
 established itself since then as a standard tool.
 
-
 Current maintainer:
    David Schweikert <david@schweikert.ch>
 
 Website:
-   http://www.fping.org
+   http://fping.org/
+
+Mailing-list:
+   https://groups.google.com/group/fping-users
 
 
+Installation
+------------
+If you want to install fping from source, proceed as follows:
+
+1. Run ./configure with the correct arguments
+   (see: ./configure --help)
+
+2. Run make; make install
+
+3. Make fping either setuid, or, if under Linux:
+
+   sudo setcap cap_net_raw+ep fping
+
+4. Have a look at the fping(8) manual for usage help
+   (fping -h will also give a minimal help output)
+
+
+IPv6 support
+------------
+You can can compile fping with support for IPv6 addresses. A separate binary
+is used for that, called fping6. To build it, use ./configure --enable-ipv6
+(possibly combined with --enable-ipv4 to also build fping for IPv4). E.g.:
+
+  # ./configure --prefix=/usr/local --enable-ipv4 --enable-ipv6
+  # make
+  # make install
+  # sudo setcap cap_net_raw+ep /usr/local/bin/fping*
+
+
+Credits
+-------
 Original author:  Roland Schemers (schemers@stanford.edu)
 Previous maintainer:  RL "Bob" Morgan (morgan@stanford.edu)
-IPv6 Support: Jeroen Massar (jeroen@unfix.org / jeroen@ipng.nl)
-              to enable IPV6 compile with -DIPV6                          
-
-------------------------------------------------------------------------------
-
-Original README (from 1992!)
-
-        fping - A tool to quickly ping N number of hosts to determine
-        their reachability.
-
-             Roland J. Schemers III - Stanford University
-                   schemers@Stanford.EDU
-
-      fping is a ping(1) like program which uses the Internet Control
-      Message Protocol (ICMP) echo request to determine if a host is
-      up. fping is different from ping in that you can specify any
-      number of hosts on the command line, or specify a file containing
-      the lists of hosts to ping. Instead of trying one host until it
-      timeouts or replies, fping will send out a ping packet and move
-      on to the next host in a round-robin fashion. If a host replies,
-      it is noted and removed from the list of hosts to check. If a host
-      does not respond within a certain time limit and/or retry limit it 
-      will be considered unreachable. 
-
-Site
-      Stanford University has a large TCP/IP network with over 16,000 
-      assigned IP addresses and over 100 IP subnets.
-
-Problem and Issues
-
-      With a large a number of IP addresses in use, its becomes more and
-      more time consuming to check on which IP addresses are actively
-      in use, and which critical machines (routers, bridges, servers, etc)
-      are reachable. One example is we have a program which goes through
-      all of our routers arp caches looking for IP addresses that are in 
-      use. After finding a list of IP addresses that aren't in any arp
-      caches fping can then be used to see if these IP addresses really
-      aren't being used, or are just behind the routers. Checking 2500
-      hosts (99% of which are unreachable) via ping can take hours.
-       
-      fping was written to solve the problem of pinging N number of hosts
-      in an efficient manner. By sending out pings in a round-robin fashion
-      and checking on responses as they come in at random, a large number of 
-      hosts can be checked at once.
-
-      Unlike ping, fping is meant to be used in scripts and its
-      output is easy to parse.
+Initial IPv6 Support: Jeroen Massar (jeroen@unfix.org / jeroen@ipng.nl)
+Other contributors: see ChangeLog

acconfig.h

@@ -1,18 +0,0 @@
-#ifndef CONFIG_H
-#define CONFIG_H
-
-@TOP@
-
-/* VERSION (from configure.in) */
-#undef VERSION
-
-
-@BOTTOM@
-
-/* some OSes do not define this ... lets take a wild guess */
-
-#ifndef INADDR_NONE
-#  define INADDR_NONE 0xffffffffU
-#endif
-
-#endif /* CONFIG_H */

aclocal.m4

@@ -1,991 +0,0 @@
-# generated automatically by aclocal 1.11.1 -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006, 2007, 2008, 2009  Free Software Foundation, Inc.
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-m4_ifndef([AC_AUTOCONF_VERSION],
-  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.68],,
-[m4_warning([this file was generated for autoconf 2.68.
-You have another version of autoconf.  It may work, but is not guaranteed to.
-If you have problems, you may need to regenerate the build system entirely.
-To do so, use the procedure documented by the package, typically `autoreconf'.])])
-
-# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_AUTOMAKE_VERSION(VERSION)
-# ----------------------------
-# Automake X.Y traces this macro to ensure aclocal.m4 has been
-# generated from the m4 files accompanying Automake X.Y.
-# (This private macro should not be called outside this file.)
-AC_DEFUN([AM_AUTOMAKE_VERSION],
-[am__api_version='1.11'
-dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
-dnl require some minimum version.  Point them to the right macro.
-m4_if([$1], [1.11.1], [],
-      [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
-])
-
-# _AM_AUTOCONF_VERSION(VERSION)
-# -----------------------------
-# aclocal traces this macro to find the Autoconf version.
-# This is a private macro too.  Using m4_define simplifies
-# the logic in aclocal, which can simply ignore this definition.
-m4_define([_AM_AUTOCONF_VERSION], [])
-
-# AM_SET_CURRENT_AUTOMAKE_VERSION
-# -------------------------------
-# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
-# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
-AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.11.1])dnl
-m4_ifndef([AC_AUTOCONF_VERSION],
-  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
-
-# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
-
-# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
-# $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
-# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
-#
-# Of course, Automake must honor this variable whenever it calls a
-# tool from the auxiliary directory.  The problem is that $srcdir (and
-# therefore $ac_aux_dir as well) can be either absolute or relative,
-# depending on how configure is run.  This is pretty annoying, since
-# it makes $ac_aux_dir quite unusable in subdirectories: in the top
-# source directory, any form will work fine, but in subdirectories a
-# relative path needs to be adjusted first.
-#
-# $ac_aux_dir/missing
-#    fails when called from a subdirectory if $ac_aux_dir is relative
-# $top_srcdir/$ac_aux_dir/missing
-#    fails if $ac_aux_dir is absolute,
-#    fails when called from a subdirectory in a VPATH build with
-#          a relative $ac_aux_dir
-#
-# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
-# are both prefixed by $srcdir.  In an in-source build this is usually
-# harmless because $srcdir is `.', but things will broke when you
-# start a VPATH build or use an absolute $srcdir.
-#
-# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
-# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
-#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
-# and then we would define $MISSING as
-#   MISSING="\${SHELL} $am_aux_dir/missing"
-# This will work as long as MISSING is not called from configure, because
-# unfortunately $(top_srcdir) has no meaning in configure.
-# However there are other variables, like CC, which are often used in
-# configure, and could therefore not use this "fixed" $ac_aux_dir.
-#
-# Another solution, used here, is to always expand $ac_aux_dir to an
-# absolute PATH.  The drawback is that using absolute paths prevent a
-# configured tree to be moved without reconfiguration.
-
-AC_DEFUN([AM_AUX_DIR_EXPAND],
-[dnl Rely on autoconf to set up CDPATH properly.
-AC_PREREQ([2.50])dnl
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
-])
-
-# AM_CONDITIONAL                                            -*- Autoconf -*-
-
-# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 9
-
-# AM_CONDITIONAL(NAME, SHELL-CONDITION)
-# -------------------------------------
-# Define a conditional.
-AC_DEFUN([AM_CONDITIONAL],
-[AC_PREREQ(2.52)dnl
- ifelse([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
-	[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
-AC_SUBST([$1_TRUE])dnl
-AC_SUBST([$1_FALSE])dnl
-_AM_SUBST_NOTMAKE([$1_TRUE])dnl
-_AM_SUBST_NOTMAKE([$1_FALSE])dnl
-m4_define([_AM_COND_VALUE_$1], [$2])dnl
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi
-AC_CONFIG_COMMANDS_PRE(
-[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
-  AC_MSG_ERROR([[conditional "$1" was never defined.
-Usually this means the macro was only invoked conditionally.]])
-fi])])
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 10
-
-# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
-# written in clear, in which case automake, when reading aclocal.m4,
-# will think it sees a *use*, and therefore will trigger all it's
-# C support machinery.  Also note that it means that autoscan, seeing
-# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
-
-
-# _AM_DEPENDENCIES(NAME)
-# ----------------------
-# See how the compiler implements dependency checking.
-# NAME is "CC", "CXX", "GCJ", or "OBJC".
-# We try a few techniques and use that to set a single cache variable.
-#
-# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
-# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
-# dependency, and given that the user is not expected to run this macro,
-# just rely on AC_PROG_CC.
-AC_DEFUN([_AM_DEPENDENCIES],
-[AC_REQUIRE([AM_SET_DEPDIR])dnl
-AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
-AC_REQUIRE([AM_MAKE_INCLUDE])dnl
-AC_REQUIRE([AM_DEP_TRACK])dnl
-
-ifelse([$1], CC,   [depcc="$CC"   am_compiler_list=],
-       [$1], CXX,  [depcc="$CXX"  am_compiler_list=],
-       [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
-       [$1], UPC,  [depcc="$UPC"  am_compiler_list=],
-       [$1], GCJ,  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
-                   [depcc="$$1"   am_compiler_list=])
-
-AC_CACHE_CHECK([dependency style of $depcc],
-               [am_cv_$1_dependencies_compiler_type],
-[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
-  # We make a subdir and do the tests there.  Otherwise we can end up
-  # making bogus files that we don't know about and never remove.  For
-  # instance it was reported that on HP-UX the gcc test will end up
-  # making a dummy file named `D' -- because `-MD' means `put the output
-  # in D'.
-  mkdir conftest.dir
-  # Copy depcomp to subdir because otherwise we won't find it if we're
-  # using a relative directory.
-  cp "$am_depcomp" conftest.dir
-  cd conftest.dir
-  # We will build objects and dependencies in a subdirectory because
-  # it helps to detect inapplicable dependency modes.  For instance
-  # both Tru64's cc and ICC support -MD to output dependencies as a
-  # side effect of compilation, but ICC will put the dependencies in
-  # the current directory while Tru64 will put them in the object
-  # directory.
-  mkdir sub
-
-  am_cv_$1_dependencies_compiler_type=none
-  if test "$am_compiler_list" = ""; then
-     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
-  fi
-  am__universal=false
-  m4_case([$1], [CC],
-    [case " $depcc " in #(
-     *\ -arch\ *\ -arch\ *) am__universal=true ;;
-     esac],
-    [CXX],
-    [case " $depcc " in #(
-     *\ -arch\ *\ -arch\ *) am__universal=true ;;
-     esac])
-
-  for depmode in $am_compiler_list; do
-    # Setup a source with many dependencies, because some compilers
-    # like to wrap large dependency lists on column 80 (with \), and
-    # we should not choose a depcomp mode which is confused by this.
-    #
-    # We need to recreate these files for each test, as the compiler may
-    # overwrite some of them when testing with obscure command lines.
-    # This happens at least with the AIX C compiler.
-    : > sub/conftest.c
-    for i in 1 2 3 4 5 6; do
-      echo '#include "conftst'$i'.h"' >> sub/conftest.c
-      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
-      # Solaris 8's {/usr,}/bin/sh.
-      touch sub/conftst$i.h
-    done
-    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
-    # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.  Also, some Intel
-    # versions had trouble with output in subdirs
-    am__obj=sub/conftest.${OBJEXT-o}
-    am__minus_obj="-o $am__obj"
-    case $depmode in
-    gcc)
-      # This depmode causes a compiler race in universal mode.
-      test "$am__universal" = false || continue
-      ;;
-    nosideeffect)
-      # after this tag, mechanisms are not by side-effect, so they'll
-      # only be used when explicitly requested
-      if test "x$enable_dependency_tracking" = xyes; then
-	continue
-      else
-	break
-      fi
-      ;;
-    msvisualcpp | msvcmsys)
-      # This compiler won't grok `-c -o', but also, the minuso test has
-      # not run yet.  These depmodes are late enough in the game, and
-      # so weak that their functioning should not be impacted.
-      am__obj=conftest.${OBJEXT-o}
-      am__minus_obj=
-      ;;
-    none) break ;;
-    esac
-    if depmode=$depmode \
-       source=sub/conftest.c object=$am__obj \
-       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
-       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
-         >/dev/null 2>conftest.err &&
-       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
-       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
-      # icc doesn't choke on unknown options, it will just issue warnings
-      # or remarks (even with -Werror).  So we grep stderr for any message
-      # that says an option was ignored or not supported.
-      # When given -MP, icc 7.0 and 7.1 complain thusly:
-      #   icc: Command line warning: ignoring option '-M'; no argument required
-      # The diagnosis changed in icc 8.0:
-      #   icc: Command line remark: option '-MP' not supported
-      if (grep 'ignoring option' conftest.err ||
-          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
-        am_cv_$1_dependencies_compiler_type=$depmode
-        break
-      fi
-    fi
-  done
-
-  cd ..
-  rm -rf conftest.dir
-else
-  am_cv_$1_dependencies_compiler_type=none
-fi
-])
-AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
-AM_CONDITIONAL([am__fastdep$1], [
-  test "x$enable_dependency_tracking" != xno \
-  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
-])
-
-
-# AM_SET_DEPDIR
-# -------------
-# Choose a directory name for dependency files.
-# This macro is AC_REQUIREd in _AM_DEPENDENCIES
-AC_DEFUN([AM_SET_DEPDIR],
-[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
-])
-
-
-# AM_DEP_TRACK
-# ------------
-AC_DEFUN([AM_DEP_TRACK],
-[AC_ARG_ENABLE(dependency-tracking,
-[  --disable-dependency-tracking  speeds up one-time build
-  --enable-dependency-tracking   do not reject slow dependency extractors])
-if test "x$enable_dependency_tracking" != xno; then
-  am_depcomp="$ac_aux_dir/depcomp"
-  AMDEPBACKSLASH='\'
-fi
-AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-AC_SUBST([AMDEPBACKSLASH])dnl
-_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
-])
-
-# Generate code to set up dependency tracking.              -*- Autoconf -*-
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-#serial 5
-
-# _AM_OUTPUT_DEPENDENCY_COMMANDS
-# ------------------------------
-AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
-[{
-  # Autoconf 2.62 quotes --file arguments for eval, but not when files
-  # are listed without --file.  Let's play safe and only enable the eval
-  # if we detect the quoting.
-  case $CONFIG_FILES in
-  *\'*) eval set x "$CONFIG_FILES" ;;
-  *)   set x $CONFIG_FILES ;;
-  esac
-  shift
-  for mf
-  do
-    # Strip MF so we end up with the name of the file.
-    mf=`echo "$mf" | sed -e 's/:.*$//'`
-    # Check whether this is an Automake generated Makefile or not.
-    # We used to match only the files named `Makefile.in', but
-    # some people rename them; so instead we look at the file content.
-    # Grep'ing the first line is not enough: some people post-process
-    # each Makefile.in and add a new line on top of each file to say so.
-    # Grep'ing the whole file is not good either: AIX grep has a line
-    # limit of 2048, but all sed's we know have understand at least 4000.
-    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
-      dirpart=`AS_DIRNAME("$mf")`
-    else
-      continue
-    fi
-    # Extract the definition of DEPDIR, am__include, and am__quote
-    # from the Makefile without running `make'.
-    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
-    test -z "$DEPDIR" && continue
-    am__include=`sed -n 's/^am__include = //p' < "$mf"`
-    test -z "am__include" && continue
-    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
-    # When using ansi2knr, U may be empty or an underscore; expand it
-    U=`sed -n 's/^U = //p' < "$mf"`
-    # Find all dependency output files, they are included files with
-    # $(DEPDIR) in their names.  We invoke sed twice because it is the
-    # simplest approach to changing $(DEPDIR) to its actual value in the
-    # expansion.
-    for file in `sed -n "
-      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
-	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
-      # Make sure the directory exists.
-      test -f "$dirpart/$file" && continue
-      fdir=`AS_DIRNAME(["$file"])`
-      AS_MKDIR_P([$dirpart/$fdir])
-      # echo "creating $dirpart/$file"
-      echo '# dummy' > "$dirpart/$file"
-    done
-  done
-}
-])# _AM_OUTPUT_DEPENDENCY_COMMANDS
-
-
-# AM_OUTPUT_DEPENDENCY_COMMANDS
-# -----------------------------
-# This macro should only be invoked once -- use via AC_REQUIRE.
-#
-# This code is only required when automatic dependency tracking
-# is enabled.  FIXME.  This creates each `.P' file that we will
-# need in order to bootstrap the dependency handling code.
-AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
-[AC_CONFIG_COMMANDS([depfiles],
-     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
-     [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
-])
-
-# Do all the work for Automake.                             -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 16
-
-# This macro actually does too much.  Some checks are only needed if
-# your package does certain things.  But this isn't really a big deal.
-
-# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
-# AM_INIT_AUTOMAKE([OPTIONS])
-# -----------------------------------------------
-# The call with PACKAGE and VERSION arguments is the old style
-# call (pre autoconf-2.50), which is being phased out.  PACKAGE
-# and VERSION should now be passed to AC_INIT and removed from
-# the call to AM_INIT_AUTOMAKE.
-# We support both call styles for the transition.  After
-# the next Automake release, Autoconf can make the AC_INIT
-# arguments mandatory, and then we can depend on a new Autoconf
-# release and drop the old call support.
-AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.62])dnl
-dnl Autoconf wants to disallow AM_ names.  We explicitly allow
-dnl the ones we care about.
-m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
-AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
-AC_REQUIRE([AC_PROG_INSTALL])dnl
-if test "`cd $srcdir && pwd`" != "`pwd`"; then
-  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
-  # is not polluted with repeated "-I."
-  AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
-  # test to see if srcdir already configured
-  if test -f $srcdir/config.status; then
-    AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-  fi
-fi
-
-# test whether we have cygpath
-if test -z "$CYGPATH_W"; then
-  if (cygpath --version) >/dev/null 2>/dev/null; then
-    CYGPATH_W='cygpath -w'
-  else
-    CYGPATH_W=echo
-  fi
-fi
-AC_SUBST([CYGPATH_W])
-
-# Define the identity of the package.
-dnl Distinguish between old-style and new-style calls.
-m4_ifval([$2],
-[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
- AC_SUBST([PACKAGE], [$1])dnl
- AC_SUBST([VERSION], [$2])],
-[_AM_SET_OPTIONS([$1])dnl
-dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
-m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
-  [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
- AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
- AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
-
-_AM_IF_OPTION([no-define],,
-[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
- AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
-
-# Some tools Automake needs.
-AC_REQUIRE([AM_SANITY_CHECK])dnl
-AC_REQUIRE([AC_ARG_PROGRAM])dnl
-AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
-AM_MISSING_PROG(AUTOCONF, autoconf)
-AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
-AM_MISSING_PROG(AUTOHEADER, autoheader)
-AM_MISSING_PROG(MAKEINFO, makeinfo)
-AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
-AC_REQUIRE([AM_PROG_MKDIR_P])dnl
-# We need awk for the "check" target.  The system "awk" is bad on
-# some platforms.
-AC_REQUIRE([AC_PROG_AWK])dnl
-AC_REQUIRE([AC_PROG_MAKE_SET])dnl
-AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
-	      [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
-			     [_AM_PROG_TAR([v7])])])
-_AM_IF_OPTION([no-dependencies],,
-[AC_PROVIDE_IFELSE([AC_PROG_CC],
-		  [_AM_DEPENDENCIES(CC)],
-		  [define([AC_PROG_CC],
-			  defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_CXX],
-		  [_AM_DEPENDENCIES(CXX)],
-		  [define([AC_PROG_CXX],
-			  defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_OBJC],
-		  [_AM_DEPENDENCIES(OBJC)],
-		  [define([AC_PROG_OBJC],
-			  defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
-])
-_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
-dnl The `parallel-tests' driver may need to know about EXEEXT, so add the
-dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen.  This macro
-dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
-AC_CONFIG_COMMANDS_PRE(dnl
-[m4_provide_if([_AM_COMPILER_EXEEXT],
-  [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
-])
-
-dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
-dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
-dnl mangled by Autoconf and run in a shell conditional statement.
-m4_define([_AC_COMPILER_EXEEXT],
-m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
-
-
-# When config.status generates a header, we must update the stamp-h file.
-# This file resides in the same directory as the config header
-# that is generated.  The stamp files are numbered to have different names.
-
-# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
-# loop where config.status creates the headers, so we can generate
-# our stamp files there.
-AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
-[# Compute $1's index in $config_headers.
-_am_arg=$1
-_am_stamp_count=1
-for _am_header in $config_headers :; do
-  case $_am_header in
-    $_am_arg | $_am_arg:* )
-      break ;;
-    * )
-      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
-  esac
-done
-echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
-
-# Copyright (C) 2001, 2003, 2005, 2008  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_INSTALL_SH
-# ------------------
-# Define $install_sh.
-AC_DEFUN([AM_PROG_INSTALL_SH],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-if test x"${install_sh}" != xset; then
-  case $am_aux_dir in
-  *\ * | *\	*)
-    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
-  *)
-    install_sh="\${SHELL} $am_aux_dir/install-sh"
-  esac
-fi
-AC_SUBST(install_sh)])
-
-# Copyright (C) 2003, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 2
-
-# Check whether the underlying file-system supports filenames
-# with a leading dot.  For instance MS-DOS doesn't.
-AC_DEFUN([AM_SET_LEADING_DOT],
-[rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
-  am__leading_dot=.
-else
-  am__leading_dot=_
-fi
-rmdir .tst 2>/dev/null
-AC_SUBST([am__leading_dot])])
-
-# Add --enable-maintainer-mode option to configure.         -*- Autoconf -*-
-# From Jim Meyering
-
-# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005, 2008
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 5
-
-# AM_MAINTAINER_MODE([DEFAULT-MODE])
-# ----------------------------------
-# Control maintainer-specific portions of Makefiles.
-# Default is to disable them, unless `enable' is passed literally.
-# For symmetry, `disable' may be passed as well.  Anyway, the user
-# can override the default with the --enable/--disable switch.
-AC_DEFUN([AM_MAINTAINER_MODE],
-[m4_case(m4_default([$1], [disable]),
-       [enable], [m4_define([am_maintainer_other], [disable])],
-       [disable], [m4_define([am_maintainer_other], [enable])],
-       [m4_define([am_maintainer_other], [enable])
-        m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])])
-AC_MSG_CHECKING([whether to am_maintainer_other maintainer-specific portions of Makefiles])
-  dnl maintainer-mode's default is 'disable' unless 'enable' is passed
-  AC_ARG_ENABLE([maintainer-mode],
-[  --][am_maintainer_other][-maintainer-mode  am_maintainer_other make rules and dependencies not useful
-			  (and sometimes confusing) to the casual installer],
-      [USE_MAINTAINER_MODE=$enableval],
-      [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes]))
-  AC_MSG_RESULT([$USE_MAINTAINER_MODE])
-  AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes])
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST([MAINT])dnl
-]
-)
-
-AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
-
-# Check to see how 'make' treats includes.	            -*- Autoconf -*-
-
-# Copyright (C) 2001, 2002, 2003, 2005, 2009  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 4
-
-# AM_MAKE_INCLUDE()
-# -----------------
-# Check to see how make treats includes.
-AC_DEFUN([AM_MAKE_INCLUDE],
-[am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
-	@echo this is the am__doit target
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-AC_MSG_CHECKING([for style of include used by $am_make])
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# Ignore all kinds of additional output from `make'.
-case `$am_make -s -f confmf 2> /dev/null` in #(
-*the\ am__doit\ target*)
-  am__include=include
-  am__quote=
-  _am_result=GNU
-  ;;
-esac
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
-   echo '.include "confinc"' > confmf
-   case `$am_make -s -f confmf 2> /dev/null` in #(
-   *the\ am__doit\ target*)
-     am__include=.include
-     am__quote="\""
-     _am_result=BSD
-     ;;
-   esac
-fi
-AC_SUBST([am__include])
-AC_SUBST([am__quote])
-AC_MSG_RESULT([$_am_result])
-rm -f confinc confmf
-])
-
-# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
-
-# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 6
-
-# AM_MISSING_PROG(NAME, PROGRAM)
-# ------------------------------
-AC_DEFUN([AM_MISSING_PROG],
-[AC_REQUIRE([AM_MISSING_HAS_RUN])
-$1=${$1-"${am_missing_run}$2"}
-AC_SUBST($1)])
-
-
-# AM_MISSING_HAS_RUN
-# ------------------
-# Define MISSING if not defined so far and test if it supports --run.
-# If it does, set am_missing_run to use it, otherwise, to nothing.
-AC_DEFUN([AM_MISSING_HAS_RUN],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-AC_REQUIRE_AUX_FILE([missing])dnl
-if test x"${MISSING+set}" != xset; then
-  case $am_aux_dir in
-  *\ * | *\	*)
-    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
-  *)
-    MISSING="\${SHELL} $am_aux_dir/missing" ;;
-  esac
-fi
-# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
-  am_missing_run="$MISSING --run "
-else
-  am_missing_run=
-  AC_MSG_WARN([`missing' script is too old or missing])
-fi
-])
-
-# Copyright (C) 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_MKDIR_P
-# ---------------
-# Check for `mkdir -p'.
-AC_DEFUN([AM_PROG_MKDIR_P],
-[AC_PREREQ([2.60])dnl
-AC_REQUIRE([AC_PROG_MKDIR_P])dnl
-dnl Automake 1.8 to 1.9.6 used to define mkdir_p.  We now use MKDIR_P,
-dnl while keeping a definition of mkdir_p for backward compatibility.
-dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
-dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
-dnl Makefile.ins that do not define MKDIR_P, so we do our own
-dnl adjustment using top_builddir (which is defined more often than
-dnl MKDIR_P).
-AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
-case $mkdir_p in
-  [[\\/$]]* | ?:[[\\/]]*) ;;
-  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
-esac
-])
-
-# Helper functions for option handling.                     -*- Autoconf -*-
-
-# Copyright (C) 2001, 2002, 2003, 2005, 2008  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 4
-
-# _AM_MANGLE_OPTION(NAME)
-# -----------------------
-AC_DEFUN([_AM_MANGLE_OPTION],
-[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
-
-# _AM_SET_OPTION(NAME)
-# ------------------------------
-# Set option NAME.  Presently that only means defining a flag for this option.
-AC_DEFUN([_AM_SET_OPTION],
-[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
-
-# _AM_SET_OPTIONS(OPTIONS)
-# ----------------------------------
-# OPTIONS is a space-separated list of Automake options.
-AC_DEFUN([_AM_SET_OPTIONS],
-[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
-
-# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
-# -------------------------------------------
-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
-AC_DEFUN([_AM_IF_OPTION],
-[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
-
-# Check to make sure that the build environment is sane.    -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 5
-
-# AM_SANITY_CHECK
-# ---------------
-AC_DEFUN([AM_SANITY_CHECK],
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftest.file
-# Reject unsafe characters in $srcdir or the absolute working directory
-# name.  Accept space and tab only in the latter.
-am_lf='
-'
-case `pwd` in
-  *[[\\\"\#\$\&\'\`$am_lf]]*)
-    AC_MSG_ERROR([unsafe absolute working directory name]);;
-esac
-case $srcdir in
-  *[[\\\"\#\$\&\'\`$am_lf\ \	]]*)
-    AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);;
-esac
-
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
-   if test "$[*]" = "X"; then
-      # -L didn't work.
-      set X `ls -t "$srcdir/configure" conftest.file`
-   fi
-   rm -f conftest.file
-   if test "$[*]" != "X $srcdir/configure conftest.file" \
-      && test "$[*]" != "X conftest.file $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "$[2]" = conftest.file
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-AC_MSG_RESULT(yes)])
-
-# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_INSTALL_STRIP
-# ---------------------
-# One issue with vendor `install' (even GNU) is that you can't
-# specify the program used to strip binaries.  This is especially
-# annoying in cross-compiling environments, where the build's strip
-# is unlikely to handle the host's binaries.
-# Fortunately install-sh will honor a STRIPPROG variable, so we
-# always use install-sh in `make install-strip', and initialize
-# STRIPPROG with the value of the STRIP variable (set by the user).
-AC_DEFUN([AM_PROG_INSTALL_STRIP],
-[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'.  However `strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
-if test "$cross_compiling" != no; then
-  AC_CHECK_TOOL([STRIP], [strip], :)
-fi
-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
-AC_SUBST([INSTALL_STRIP_PROGRAM])])
-
-# Copyright (C) 2006, 2008  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 2
-
-# _AM_SUBST_NOTMAKE(VARIABLE)
-# ---------------------------
-# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
-# This macro is traced by Automake.
-AC_DEFUN([_AM_SUBST_NOTMAKE])
-
-# AM_SUBST_NOTMAKE(VARIABLE)
-# ---------------------------
-# Public sister of _AM_SUBST_NOTMAKE.
-AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
-
-# Check how to create a tarball.                            -*- Autoconf -*-
-
-# Copyright (C) 2004, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 2
-
-# _AM_PROG_TAR(FORMAT)
-# --------------------
-# Check how to create a tarball in format FORMAT.
-# FORMAT should be one of `v7', `ustar', or `pax'.
-#
-# Substitute a variable $(am__tar) that is a command
-# writing to stdout a FORMAT-tarball containing the directory
-# $tardir.
-#     tardir=directory && $(am__tar) > result.tar
-#
-# Substitute a variable $(am__untar) that extract such
-# a tarball read from stdin.
-#     $(am__untar) < result.tar
-AC_DEFUN([_AM_PROG_TAR],
-[# Always define AMTAR for backward compatibility.
-AM_MISSING_PROG([AMTAR], [tar])
-m4_if([$1], [v7],
-     [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
-     [m4_case([$1], [ustar],, [pax],,
-              [m4_fatal([Unknown tar format])])
-AC_MSG_CHECKING([how to create a $1 tar archive])
-# Loop over all known methods to create a tar archive until one works.
-_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
-_am_tools=${am_cv_prog_tar_$1-$_am_tools}
-# Do not fold the above two line into one, because Tru64 sh and
-# Solaris sh will not grok spaces in the rhs of `-'.
-for _am_tool in $_am_tools
-do
-  case $_am_tool in
-  gnutar)
-    for _am_tar in tar gnutar gtar;
-    do
-      AM_RUN_LOG([$_am_tar --version]) && break
-    done
-    am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
-    am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
-    am__untar="$_am_tar -xf -"
-    ;;
-  plaintar)
-    # Must skip GNU tar: if it does not support --format= it doesn't create
-    # ustar tarball either.
-    (tar --version) >/dev/null 2>&1 && continue
-    am__tar='tar chf - "$$tardir"'
-    am__tar_='tar chf - "$tardir"'
-    am__untar='tar xf -'
-    ;;
-  pax)
-    am__tar='pax -L -x $1 -w "$$tardir"'
-    am__tar_='pax -L -x $1 -w "$tardir"'
-    am__untar='pax -r'
-    ;;
-  cpio)
-    am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
-    am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
-    am__untar='cpio -i -H $1 -d'
-    ;;
-  none)
-    am__tar=false
-    am__tar_=false
-    am__untar=false
-    ;;
-  esac
-
-  # If the value was cached, stop now.  We just wanted to have am__tar
-  # and am__untar set.
-  test -n "${am_cv_prog_tar_$1}" && break
-
-  # tar/untar a dummy directory, and stop if the command works
-  rm -rf conftest.dir
-  mkdir conftest.dir
-  echo GrepMe > conftest.dir/file
-  AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
-  rm -rf conftest.dir
-  if test -s conftest.tar; then
-    AM_RUN_LOG([$am__untar <conftest.tar])
-    grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
-  fi
-done
-rm -rf conftest.dir
-
-AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
-AC_MSG_RESULT([$am_cv_prog_tar_$1])])
-AC_SUBST([am__tar])
-AC_SUBST([am__untar])
-]) # _AM_PROG_TAR
-

autoclean.sh

@@ -0,0 +1,21 @@
+#!/bin/sh
+[ -f Makefile ] && make clean
+rm -f Makefile
+rm -f Makefile.in
+rm -f aclocal.m4
+rm -rf autom4te.cache
+rm -f config.guess
+rm -f config.h
+rm -f config.h.in
+rm -f config.log
+rm -f config.status
+rm -f config.sub
+rm -f configure
+rm -f depcomp
+rm -f install-sh
+rm -f missing
+rm -f mkinstalldirs
+rm -f stamp-h1
+rm -f doc/Makefile.in
+rm -f src/Makefile.in
+rm -f doc/fping.8

autogen.sh

@@ -1,4 +1,2 @@
 #!/bin/sh
-PATH="/usr/pack/automake-1.11-to/amd64-linux-debian3.1/:/usr/pack/automake-1.11-to/amd64-linux-ubuntu8.04/bin:$PATH"
-export PATH
-autoreconf --force --install --verbose
+autoreconf -i

config.h.in

@@ -1,80 +0,0 @@
-/* config.h.in.  Generated from configure.in by autoheader.  */
-
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-
-/* Define to 1 if you have the <inttypes.h> header file. */
-#undef HAVE_INTTYPES_H
-
-/* Define to 1 if you have the `nsl' library (-lnsl). */
-#undef HAVE_LIBNSL
-
-/* Define to 1 if you have the `socket' library (-lsocket). */
-#undef HAVE_LIBSOCKET
-
-/* Define to 1 if you have the <memory.h> header file. */
-#undef HAVE_MEMORY_H
-
-/* Define to 1 if you have the <stdint.h> header file. */
-#undef HAVE_STDINT_H
-
-/* Define to 1 if you have the <stdlib.h> header file. */
-#undef HAVE_STDLIB_H
-
-/* Define to 1 if you have the <strings.h> header file. */
-#undef HAVE_STRINGS_H
-
-/* Define to 1 if you have the <string.h> header file. */
-#undef HAVE_STRING_H
-
-/* Define to 1 if you have the <sys/file.h> header file. */
-#undef HAVE_SYS_FILE_H
-
-/* Define to 1 if you have the <sys/select.h> header file. */
-#undef HAVE_SYS_SELECT_H
-
-/* Define to 1 if you have the <sys/stat.h> header file. */
-#undef HAVE_SYS_STAT_H
-
-/* Define to 1 if you have the <sys/types.h> header file. */
-#undef HAVE_SYS_TYPES_H
-
-/* Define to 1 if you have the <unistd.h> header file. */
-#undef HAVE_UNISTD_H
-
-/* Name of package */
-#undef PACKAGE
-
-/* Define to the address where bug reports for this package should be sent. */
-#undef PACKAGE_BUGREPORT
-
-/* Define to the full name of this package. */
-#undef PACKAGE_NAME
-
-/* Define to the full name and version of this package. */
-#undef PACKAGE_STRING
-
-/* Define to the one symbol short name of this package. */
-#undef PACKAGE_TARNAME
-
-/* Define to the version of this package. */
-#undef PACKAGE_VERSION
-
-/* Define to 1 if you have the ANSI C header files. */
-#undef STDC_HEADERS
-
-/* Version number of package */
-#undef VERSION
-
-
-/* some OSes do not define this ... lets take a wild guess */
-
-#ifndef INADDR_NONE
-#  define INADDR_NONE 0xffffffffU
-#endif
-
-#endif /* CONFIG_H */
-
-

configure.ac

@@ -0,0 +1,77 @@
+dnl Process this file with autoconf to produce a configure script.
+
+dnl Minimum Autoconf version required.
+AC_PREREQ(2.59)
+
+AC_INIT([fping],[3.7])
+
+dnl make ipv4 and ipv6 options
+AC_ARG_ENABLE([ipv4],
+  [  --enable-ipv4    Build IPv4 capable fping],
+  [case "${enableval}" in
+   yes)	ipv4=true ;;
+   no)	ipv4=false ;;
+   *)	AC_MSG_ERROR([bad value ${enableval} for --enable-ipv4]) ;;
+   esac],[ipv4=true])
+  AM_CONDITIONAL([IPV4], [test x$ipv4 = xtrue])
+
+AC_ARG_ENABLE([ipv6],
+  [  --enable-ipv6    Build IPv6 capable fping6],
+  [case "${enableval}" in
+   yes)	ipv6=true ;;
+   no)	ipv6=false ;;
+   *)	AC_MSG_ERROR([bad value ${enableval} for --enable-ipv6]) ;;
+   esac],[ipv6=false])
+  AM_CONDITIONAL([IPV6], [test x$ipv6 = xtrue])
+
+if test x$ipv4 = xfalse && test x$ipv6 = xfalse; then
+  AC_MSG_ERROR([You must enable at least one of IPv4 and IPv6.])
+fi
+
+AC_CANONICAL_TARGET
+AM_INIT_AUTOMAKE([foreign])
+AM_MAINTAINER_MODE
+
+AC_CONFIG_HEADERS([config.h])
+
+dnl Checks for programs.
+
+AC_PROG_CC
+AC_PROG_CPP
+AC_PROG_INSTALL
+
+dnl Checks for libraries.
+
+AC_CHECK_FUNC(gethostbyname)
+if test $ac_cv_func_gethostbyname = no; then
+    AC_CHECK_LIB(nsl, gethostbyname)
+fi
+AC_CHECK_FUNC(connect)
+if test $ac_cv_func_connect = no; then
+    AC_CHECK_LIB(socket, connect)
+fi
+
+AH_TOP([
+#ifndef CONFIG_H
+#define CONFIG_H
+])
+
+AH_BOTTOM([
+/* some OSes do not define this ... lets take a wild guess */
+
+#ifndef INADDR_NONE
+#  define INADDR_NONE 0xffffffffU
+#endif
+
+#endif /* CONFIG_H */
+
+])
+
+dnl Checks for header files.
+AC_CHECK_HEADERS(unistd.h sys/file.h stdlib.h sys/select.h)
+
+AC_CONFIG_FILES([Makefile
+                 doc/Makefile
+                 src/Makefile])
+
+AC_OUTPUT

configure.in

@@ -1,51 +0,0 @@
-dnl Process this file with autoconf to produce a configure script.
-
-dnl Minimum Autoconf version required.
-AC_PREREQ(2.59)
-
-AC_INIT([fping],[3.0])
-
-AC_CANONICAL_TARGET
-AM_INIT_AUTOMAKE
-AM_MAINTAINER_MODE
-
-AC_CONFIG_HEADERS([config.h])
-
-dnl Checks for programs.
-
-AC_PROG_CC
-AC_PROG_CPP
-AC_PROG_INSTALL
-
-dnl Checks for libraries.
-
-AC_CHECK_FUNC(gethostbyname)
-if test $ac_cv_func_gethostbyname = no; then
-    AC_CHECK_LIB(nsl, gethostbyname)
-fi
-AC_CHECK_FUNC(connect)
-if test $ac_cv_func_connect = no; then
-    AC_CHECK_LIB(socket, connect)
-fi
-
-AH_TOP([
-#ifndef CONFIG_H
-#define CONFIG_H
-])
-
-AH_BOTTOM([
-/* some OSes do not define this ... lets take a wild guess */
-
-#ifndef INADDR_NONE
-#  define INADDR_NONE 0xffffffffU
-#endif
-
-#endif /* CONFIG_H */
-
-])
-
-dnl Checks for header files.
-AC_CHECK_HEADERS(unistd.h sys/file.h stdlib.h sys/select.h)
-
-AC_OUTPUT(Makefile)
-

contrib/fping.spec

@@ -0,0 +1,73 @@
+Summary: send ICMP echo probes to multiple hosts
+Name: fping
+Version: 3.4
+Release: 1
+License: MIT
+Group: Applications/System
+Source0: http://fping.org/dist/%{name}-%{version}.tar.gz
+BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-buildroot
+
+%description
+fping is a program to send ICMP echo probes to network hosts, similar to ping,
+but much better performing when pinging multiple hosts. fping has a very long
+history: Roland Schemers did publish a first version of it in 1992 and it has
+established itself since then as a standard tool for network diagnostics and
+statistics.
+
+%prep
+%setup -q
+
+%build
+
+if [ ! -f ./configure ] ; then
+    ./autogen.sh
+fi
+
+# fping
+%configure --enable-ipv4
+make
+
+# fping6
+%configure --enable-ipv6
+make
+%{__mv} -f src/fping src/fping6
+
+%install
+rm -rf $RPM_BUILD_ROOT
+make DESTDIR=$RPM_BUILD_ROOT install
+
+# fping6
+%{__install} -Dp -m4755 src/fping6 %{buildroot}%{_sbindir}/fping6
+%{__ln_s} -f fping.8 %{buildroot}%{_mandir}/man8/fping6.8
+
+%clean
+rm -rf $RPM_BUILD_ROOT
+
+%files
+%defattr(-,root,root,-)
+%attr(4755, root, root) /usr/sbin/fping
+%attr(4755, root, root) /usr/sbin/fping6
+%doc README COPYING ChangeLog
+/usr/share/man/man8/fping.8.gz
+/usr/share/man/man8/fping6.8.gz
+
+%post
+if [ -x /usr/sbin/setcap ]; then
+    /bin/chmod 0755 /usr/sbin/fping*
+    /usr/sbin/setcap cap_net_raw+ep /usr/sbin/fping*
+fi
+
+%changelog
+* Mon Dec 24 2012 Marcus Vinicius Ferreira <ferreira.mv@gmail.com>
+- Missing './configure' script when cloning from master.
+- Making 'fping6'.
+- Fix setuid permission to 'rwsr-xr-x'.
+- doc files.
+- Replacing setuid permission if 'setcap' is present on post-install.
+- Using 'http://fping.org/dist/' for release source distributions.
+
+* Mon Jul 16 2012 Stephen Schaefer <sschaefer@acm.org>
+- Initial build
+
+# vim:ft=spec:
+

depcomp

@@ -1,630 +0,0 @@
-#! /bin/sh
-# depcomp - compile a program generating dependencies as side-effects
-
-scriptversion=2009-04-28.21; # UTC
-
-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009 Free
-# Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
-
-case $1 in
-  '')
-     echo "$0: No command.  Try \`$0 --help' for more information." 1>&2
-     exit 1;
-     ;;
-  -h | --h*)
-    cat <<\EOF
-Usage: depcomp [--help] [--version] PROGRAM [ARGS]
-
-Run PROGRAMS ARGS to compile a file, generating dependencies
-as side-effects.
-
-Environment variables:
-  depmode     Dependency tracking mode.
-  source      Source file read by `PROGRAMS ARGS'.
-  object      Object file output by `PROGRAMS ARGS'.
-  DEPDIR      directory where to store dependencies.
-  depfile     Dependency file to output.
-  tmpdepfile  Temporary file to use when outputing dependencies.
-  libtool     Whether libtool is used (yes/no).
-
-Report bugs to <bug-automake@gnu.org>.
-EOF
-    exit $?
-    ;;
-  -v | --v*)
-    echo "depcomp $scriptversion"
-    exit $?
-    ;;
-esac
-
-if test -z "$depmode" || test -z "$source" || test -z "$object"; then
-  echo "depcomp: Variables source, object and depmode must be set" 1>&2
-  exit 1
-fi
-
-# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
-depfile=${depfile-`echo "$object" |
-  sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
-tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
-
-rm -f "$tmpdepfile"
-
-# Some modes work just like other modes, but use different flags.  We
-# parameterize here, but still list the modes in the big case below,
-# to make depend.m4 easier to write.  Note that we *cannot* use a case
-# here, because this file can only contain one case statement.
-if test "$depmode" = hp; then
-  # HP compiler uses -M and no extra arg.
-  gccflag=-M
-  depmode=gcc
-fi
-
-if test "$depmode" = dashXmstdout; then
-   # This is just like dashmstdout with a different argument.
-   dashmflag=-xM
-   depmode=dashmstdout
-fi
-
-cygpath_u="cygpath -u -f -"
-if test "$depmode" = msvcmsys; then
-   # This is just like msvisualcpp but w/o cygpath translation.
-   # Just convert the backslash-escaped backslashes to single forward
-   # slashes to satisfy depend.m4
-   cygpath_u="sed s,\\\\\\\\,/,g"
-   depmode=msvisualcpp
-fi
-
-case "$depmode" in
-gcc3)
-## gcc 3 implements dependency tracking that does exactly what
-## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
-## it if -MD -MP comes after the -MF stuff.  Hmm.
-## Unfortunately, FreeBSD c89 acceptance of flags depends upon
-## the command line argument order; so add the flags where they
-## appear in depend2.am.  Note that the slowdown incurred here
-## affects only configure: in makefiles, %FASTDEP% shortcuts this.
-  for arg
-  do
-    case $arg in
-    -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
-    *)  set fnord "$@" "$arg" ;;
-    esac
-    shift # fnord
-    shift # $arg
-  done
-  "$@"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  mv "$tmpdepfile" "$depfile"
-  ;;
-
-gcc)
-## There are various ways to get dependency output from gcc.  Here's
-## why we pick this rather obscure method:
-## - Don't want to use -MD because we'd like the dependencies to end
-##   up in a subdir.  Having to rename by hand is ugly.
-##   (We might end up doing this anyway to support other compilers.)
-## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-##   -MM, not -M (despite what the docs say).
-## - Using -M directly means running the compiler twice (even worse
-##   than renaming).
-  if test -z "$gccflag"; then
-    gccflag=-MD,
-  fi
-  "$@" -Wp,"$gccflag$tmpdepfile"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
-## The second -e expression handles DOS-style file names with drive letters.
-  sed -e 's/^[^:]*: / /' \
-      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
-## This next piece of magic avoids the `deleted header file' problem.
-## The problem is that when a header file which appears in a .P file
-## is deleted, the dependency causes make to die (because there is
-## typically no way to rebuild the header).  We avoid this by adding
-## dummy dependencies for each header file.  Too bad gcc doesn't do
-## this for us directly.
-  tr ' ' '
-' < "$tmpdepfile" |
-## Some versions of gcc put a space before the `:'.  On the theory
-## that the space means something, we add a space to the output as
-## well.
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-hp)
-  # This case exists only to let depend.m4 do its work.  It works by
-  # looking at the text of this script.  This case will never be run,
-  # since it is checked for above.
-  exit 1
-  ;;
-
-sgi)
-  if test "$libtool" = yes; then
-    "$@" "-Wp,-MDupdate,$tmpdepfile"
-  else
-    "$@" -MDupdate "$tmpdepfile"
-  fi
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-
-  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
-    echo "$object : \\" > "$depfile"
-
-    # Clip off the initial element (the dependent).  Don't try to be
-    # clever and replace this with sed code, as IRIX sed won't handle
-    # lines with more than a fixed number of characters (4096 in
-    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
-    # the IRIX cc adds comments like `#:fec' to the end of the
-    # dependency line.
-    tr ' ' '
-' < "$tmpdepfile" \
-    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
-    tr '
-' ' ' >> "$depfile"
-    echo >> "$depfile"
-
-    # The second pass generates a dummy entry for each header file.
-    tr ' ' '
-' < "$tmpdepfile" \
-   | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
-   >> "$depfile"
-  else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile"
-  ;;
-
-aix)
-  # The C for AIX Compiler uses -M and outputs the dependencies
-  # in a .u file.  In older versions, this file always lives in the
-  # current directory.  Also, the AIX compiler puts `$object:' at the
-  # start of each line; $object doesn't have directory information.
-  # Version 6 uses the directory in both cases.
-  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-  test "x$dir" = "x$object" && dir=
-  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-  if test "$libtool" = yes; then
-    tmpdepfile1=$dir$base.u
-    tmpdepfile2=$base.u
-    tmpdepfile3=$dir.libs/$base.u
-    "$@" -Wc,-M
-  else
-    tmpdepfile1=$dir$base.u
-    tmpdepfile2=$dir$base.u
-    tmpdepfile3=$dir$base.u
-    "$@" -M
-  fi
-  stat=$?
-
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
-    exit $stat
-  fi
-
-  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
-  do
-    test -f "$tmpdepfile" && break
-  done
-  if test -f "$tmpdepfile"; then
-    # Each line is of the form `foo.o: dependent.h'.
-    # Do two passes, one to just change these to
-    # `$object: dependent.h' and one to simply `dependent.h:'.
-    sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
-    # That's a tab and a space in the [].
-    sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
-  else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile"
-  ;;
-
-icc)
-  # Intel's C compiler understands `-MD -MF file'.  However on
-  #    icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
-  # ICC 7.0 will fill foo.d with something like
-  #    foo.o: sub/foo.c
-  #    foo.o: sub/foo.h
-  # which is wrong.  We want:
-  #    sub/foo.o: sub/foo.c
-  #    sub/foo.o: sub/foo.h
-  #    sub/foo.c:
-  #    sub/foo.h:
-  # ICC 7.1 will output
-  #    foo.o: sub/foo.c sub/foo.h
-  # and will wrap long lines using \ :
-  #    foo.o: sub/foo.c ... \
-  #     sub/foo.h ... \
-  #     ...
-
-  "$@" -MD -MF "$tmpdepfile"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-  # Each line is of the form `foo.o: dependent.h',
-  # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
-  # Do two passes, one to just change these to
-  # `$object: dependent.h' and one to simply `dependent.h:'.
-  sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
-  # Some versions of the HPUX 10.20 sed can't process this invocation
-  # correctly.  Breaking it into two sed invocations is a workaround.
-  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
-    sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-hp2)
-  # The "hp" stanza above does not work with aCC (C++) and HP's ia64
-  # compilers, which have integrated preprocessors.  The correct option
-  # to use with these is +Maked; it writes dependencies to a file named
-  # 'foo.d', which lands next to the object file, wherever that
-  # happens to be.
-  # Much of this is similar to the tru64 case; see comments there.
-  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-  test "x$dir" = "x$object" && dir=
-  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-  if test "$libtool" = yes; then
-    tmpdepfile1=$dir$base.d
-    tmpdepfile2=$dir.libs/$base.d
-    "$@" -Wc,+Maked
-  else
-    tmpdepfile1=$dir$base.d
-    tmpdepfile2=$dir$base.d
-    "$@" +Maked
-  fi
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-     rm -f "$tmpdepfile1" "$tmpdepfile2"
-     exit $stat
-  fi
-
-  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
-  do
-    test -f "$tmpdepfile" && break
-  done
-  if test -f "$tmpdepfile"; then
-    sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
-    # Add `dependent.h:' lines.
-    sed -ne '2,${
-	       s/^ *//
-	       s/ \\*$//
-	       s/$/:/
-	       p
-	     }' "$tmpdepfile" >> "$depfile"
-  else
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile" "$tmpdepfile2"
-  ;;
-
-tru64)
-   # The Tru64 compiler uses -MD to generate dependencies as a side
-   # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
-   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
-   # dependencies in `foo.d' instead, so we check for that too.
-   # Subdirectories are respected.
-   dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-   test "x$dir" = "x$object" && dir=
-   base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-
-   if test "$libtool" = yes; then
-      # With Tru64 cc, shared objects can also be used to make a
-      # static library.  This mechanism is used in libtool 1.4 series to
-      # handle both shared and static libraries in a single compilation.
-      # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
-      #
-      # With libtool 1.5 this exception was removed, and libtool now
-      # generates 2 separate objects for the 2 libraries.  These two
-      # compilations output dependencies in $dir.libs/$base.o.d and
-      # in $dir$base.o.d.  We have to check for both files, because
-      # one of the two compilations can be disabled.  We should prefer
-      # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
-      # automatically cleaned when .libs/ is deleted, while ignoring
-      # the former would cause a distcleancheck panic.
-      tmpdepfile1=$dir.libs/$base.lo.d   # libtool 1.4
-      tmpdepfile2=$dir$base.o.d          # libtool 1.5
-      tmpdepfile3=$dir.libs/$base.o.d    # libtool 1.5
-      tmpdepfile4=$dir.libs/$base.d      # Compaq CCC V6.2-504
-      "$@" -Wc,-MD
-   else
-      tmpdepfile1=$dir$base.o.d
-      tmpdepfile2=$dir$base.d
-      tmpdepfile3=$dir$base.d
-      tmpdepfile4=$dir$base.d
-      "$@" -MD
-   fi
-
-   stat=$?
-   if test $stat -eq 0; then :
-   else
-      rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
-      exit $stat
-   fi
-
-   for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
-   do
-     test -f "$tmpdepfile" && break
-   done
-   if test -f "$tmpdepfile"; then
-      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
-      # That's a tab and a space in the [].
-      sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
-   else
-      echo "#dummy" > "$depfile"
-   fi
-   rm -f "$tmpdepfile"
-   ;;
-
-#nosideeffect)
-  # This comment above is used by automake to tell side-effect
-  # dependency tracking mechanisms from slower ones.
-
-dashmstdout)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout, regardless of -o.
-  "$@" || exit $?
-
-  # Remove the call to Libtool.
-  if test "$libtool" = yes; then
-    while test "X$1" != 'X--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-
-  # Remove `-o $object'.
-  IFS=" "
-  for arg
-  do
-    case $arg in
-    -o)
-      shift
-      ;;
-    $object)
-      shift
-      ;;
-    *)
-      set fnord "$@" "$arg"
-      shift # fnord
-      shift # $arg
-      ;;
-    esac
-  done
-
-  test -z "$dashmflag" && dashmflag=-M
-  # Require at least two characters before searching for `:'
-  # in the target name.  This is to cope with DOS-style filenames:
-  # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
-  "$@" $dashmflag |
-    sed 's:^[  ]*[^: ][^:][^:]*\:[    ]*:'"$object"'\: :' > "$tmpdepfile"
-  rm -f "$depfile"
-  cat < "$tmpdepfile" > "$depfile"
-  tr ' ' '
-' < "$tmpdepfile" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-dashXmstdout)
-  # This case only exists to satisfy depend.m4.  It is never actually
-  # run, as this mode is specially recognized in the preamble.
-  exit 1
-  ;;
-
-makedepend)
-  "$@" || exit $?
-  # Remove any Libtool call
-  if test "$libtool" = yes; then
-    while test "X$1" != 'X--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-  # X makedepend
-  shift
-  cleared=no eat=no
-  for arg
-  do
-    case $cleared in
-    no)
-      set ""; shift
-      cleared=yes ;;
-    esac
-    if test $eat = yes; then
-      eat=no
-      continue
-    fi
-    case "$arg" in
-    -D*|-I*)
-      set fnord "$@" "$arg"; shift ;;
-    # Strip any option that makedepend may not understand.  Remove
-    # the object too, otherwise makedepend will parse it as a source file.
-    -arch)
-      eat=yes ;;
-    -*|$object)
-      ;;
-    *)
-      set fnord "$@" "$arg"; shift ;;
-    esac
-  done
-  obj_suffix=`echo "$object" | sed 's/^.*\././'`
-  touch "$tmpdepfile"
-  ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
-  rm -f "$depfile"
-  cat < "$tmpdepfile" > "$depfile"
-  sed '1,2d' "$tmpdepfile" | tr ' ' '
-' | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile" "$tmpdepfile".bak
-  ;;
-
-cpp)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout.
-  "$@" || exit $?
-
-  # Remove the call to Libtool.
-  if test "$libtool" = yes; then
-    while test "X$1" != 'X--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-
-  # Remove `-o $object'.
-  IFS=" "
-  for arg
-  do
-    case $arg in
-    -o)
-      shift
-      ;;
-    $object)
-      shift
-      ;;
-    *)
-      set fnord "$@" "$arg"
-      shift # fnord
-      shift # $arg
-      ;;
-    esac
-  done
-
-  "$@" -E |
-    sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
-       -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
-    sed '$ s: \\$::' > "$tmpdepfile"
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  cat < "$tmpdepfile" >> "$depfile"
-  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-msvisualcpp)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout.
-  "$@" || exit $?
-
-  # Remove the call to Libtool.
-  if test "$libtool" = yes; then
-    while test "X$1" != 'X--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-
-  IFS=" "
-  for arg
-  do
-    case "$arg" in
-    -o)
-      shift
-      ;;
-    $object)
-      shift
-      ;;
-    "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
-	set fnord "$@"
-	shift
-	shift
-	;;
-    *)
-	set fnord "$@" "$arg"
-	shift
-	shift
-	;;
-    esac
-  done
-  "$@" -E 2>/dev/null |
-  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
-  echo "	" >> "$depfile"
-  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-msvcmsys)
-  # This case exists only to let depend.m4 do its work.  It works by
-  # looking at the text of this script.  This case will never be run,
-  # since it is checked for above.
-  exit 1
-  ;;
-
-none)
-  exec "$@"
-  ;;
-
-*)
-  echo "Unknown depmode $depmode" 1>&2
-  exit 1
-  ;;
-esac
-
-exit 0
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:

doc/Makefile.am

@@ -0,0 +1,17 @@
+man_MANS =
+
+if IPV4
+man_MANS += fping.8
+endif
+
+if IPV6
+man_MANS += fping6.8
+endif
+
+EXTRA_DIST = fping.8 fping6.8 fping.pod README.1992
+
+fping.8: fping.pod
+	pod2man  -c "" -s 8 -r "fping" $< >$@
+
+fping6.8: fping.pod
+	pod2man  -c "" -s 8 -r "fping" -n fping6 $< >$@

doc/README.1992

@@ -0,0 +1,43 @@
+Original README (from 1992)
+
+        fping - A tool to quickly ping N number of hosts to determine
+        their reachability.
+
+             Roland J. Schemers III - Stanford University
+                   schemers@Stanford.EDU
+
+      fping is a ping(1) like program which uses the Internet Control
+      Message Protocol (ICMP) echo request to determine if a host is
+      up. fping is different from ping in that you can specify any
+      number of hosts on the command line, or specify a file containing
+      the lists of hosts to ping. Instead of trying one host until it
+      timeouts or replies, fping will send out a ping packet and move
+      on to the next host in a round-robin fashion. If a host replies,
+      it is noted and removed from the list of hosts to check. If a host
+      does not respond within a certain time limit and/or retry limit it 
+      will be considered unreachable. 
+
+Site
+      Stanford University has a large TCP/IP network with over 16,000 
+      assigned IP addresses and over 100 IP subnets.
+
+Problem and Issues
+
+      With a large a number of IP addresses in use, its becomes more and
+      more time consuming to check on which IP addresses are actively
+      in use, and which critical machines (routers, bridges, servers, etc)
+      are reachable. One example is we have a program which goes through
+      all of our routers arp caches looking for IP addresses that are in 
+      use. After finding a list of IP addresses that aren't in any arp
+      caches fping can then be used to see if these IP addresses really
+      aren't being used, or are just behind the routers. Checking 2500
+      hosts (99% of which are unreachable) via ping can take hours.
+       
+      fping was written to solve the problem of pinging N number of hosts
+      in an efficient manner. By sending out pings in a round-robin fashion
+      and checking on responses as they come in at random, a large number of 
+      hosts can be checked at once.
+
+      Unlike ping, fping is meant to be used in scripts and its
+      output is easy to parse.
+

doc/fping.pod

@@ -0,0 +1,248 @@
+=head1 NAME
+
+fping - send ICMP ECHO_REQUEST packets to network hosts
+
+=head1 SYNOPSIS
+
+B<fping> [ I<options> ] [ I<systems...> ] 
+B<fping6> [ I<options> ] [ I<systems...> ] 
+
+=head1 DESCRIPTION
+
+B<fping> is a program like B<ping> which uses the Internet Control Message
+Protocol (ICMP) echo request to determine if a target host is responding.
+B<fping> differs from B<ping> in that you can specify any number of targets on the
+command line, or specify a file containing the lists of targets to ping.
+Instead of sending to one target until it times out or replies, B<fping> will
+send out a ping packet and move on to the next target in a round-robin fashion.
+In the default mode, if a target replies, it is noted and removed from the list
+of targets to check; if a target does not respond within a certain time limit
+and/or retry limit it is designated as unreachable. B<fping> also supports
+sending a specified number of pings to a target, or looping indefinitely (as in
+B<ping> ). Unlike B<ping>, B<fping> is meant to be used in scripts, so its
+output is designed to be easy to parse.
+
+The binary named B<fping6> is the same as B<fping>, except that it uses IPv6
+addresses instead of IPv4.
+
+=head1 OPTIONS
+
+=over 5
+
+=item B<-a>
+
+Show systems that are alive. 
+
+=item B<-A>
+
+Display targets by address rather than DNS name. 
+
+=item B<-b> I<n>
+
+Number of bytes of ping data to send.  The minimum size (normally 12) allows
+room for the data that B<fping> needs to do its work (sequence number,
+timestamp).  The reported received data size includes the IP header (normally
+20 bytes) and ICMP header (8 bytes), so the minimum total size is 40 bytes.
+Default is 56, as in B<ping>. Maximum is the theoretical maximum IP datagram
+size (64K), though most systems limit this to a smaller, system-dependent
+number. 
+
+=item B<-B> I<n>
+
+In the default mode, B<fping> sends several requests to a target before giving
+up, waiting longer for a reply on each successive request.  This parameter is
+the value by which the wait time is multiplied on each successive request; it
+must be entered as a floating-point number (x.y).  The default is 1.5. 
+
+=item B<-c> I<n>
+
+Number of request packets to send to each target.  In this mode, a line is
+displayed for each received response (this can suppressed with B<-q> or B<-Q>).
+Also, statistics about responses for each target are displayed when all
+requests have been sent (or when interrupted). 
+
+=item B<-C> I<n>
+
+Similar to B<-c>, but the per-target statistics are displayed in a format
+designed for automated response-time statistics gathering. For example: 
+
+ % fping -C 5 -q somehost 
+ somehost : 91.7 37.0 29.2 - 36.8 
+
+shows the response time in milliseconds for each of the five requests, with the
+C<-> indicating that no response was received to the fourth request. 
+
+=item B<-d>
+
+Use DNS to lookup address of return ping packet. This allows you to give fping
+a list of IP addresses as input and print hostnames in the output. 
+
+=item B<-D>
+
+Add Unix timestamps in front of output lines generated with in looping or counting
+modes (B<-l>, B<-c>, or B<-C>).
+
+=item B<-e>
+
+Show elapsed (round-trip) time of packets. 
+
+=item B<-f>
+
+Read list of targets from a file.  This option can only be used by the root
+user. Regular users should pipe in the file via stdin: 
+
+ % fping < targets_file 
+
+=item B<-g> I<addr/mask>
+
+Generate a target list from a supplied IP netmask, or a starting and ending IP.
+Specify the netmask or start/end in the targets portion of the command line. If
+a network with netmask is given, the network and broadcast addresses will be
+excluded. ex. To ping the network 192.168.1.0/24, the specified command line
+could look like either:
+
+ fping -g 192.168.1.0/24 
+
+or 
+
+ fping -g 192.168.1.1 192.168.1.254 
+
+=item B<-h>
+
+Print usage message.
+
+=item B<-i> I<n>
+
+The minimum amount of time (in milliseconds) between sending a ping packet
+to any target (default is 25). 
+
+=item B<-l>
+
+Loop sending packets to each target indefinitely. Can be interrupted with
+Ctrl-C; statistics about responses for each target are then displayed. 
+
+=item B<-m>
+
+Send pings to each of a target host's multiple interfaces.
+
+=item B<-n>
+
+Same as -d. 
+
+=item B<-p> <n>
+
+In looping or counting modes (B<-l>, B<-c>, or B<-C>), this parameter sets
+the time in milliseconds that B<fping> waits between successive packets to
+an individual target.  Default is 1000. 
+
+=item B<-q>
+
+Quiet. Don't show per-probe results, but only the final summary. Also don't
+show ICMP error messages.
+
+=item B<-Q> I<n>
+
+Like B<-q>, but show summary results every n seconds.
+
+=item B<-r> I<n>
+
+Retry limit (default 3). This is the number of times an attempt at pinging
+a target will be made, not including the first try. 
+
+=item B<-s>
+
+Print cumulative statistics upon exit. 
+
+=item B<-S> I<addr>
+
+Set source address. 
+
+=item B<-I> I<if>
+
+Set the interface (requires SO_BINDTODEVICE support) 
+
+=item B<-t> I<n>
+
+Initial target timeout in milliseconds (default 500). In the default mode, this
+is the amount of time that B<fping> waits for a response to its first request.
+Successive timeouts are multiplied by the backoff factor. 
+
+=item B<-T> I<n>
+
+Ignored (for compatibility with fping 2.4). 
+
+=item B<-u>
+
+Show targets that are unreachable. 
+
+=item B<-O> I<n>
+
+Set the typ of service flag (TOS). I<n> can be either decimal or hexadecimal
+(0xh) format. 
+
+=item B<-v>
+
+Print B<fping> version information. 
+
+=item B<-H> I<n>
+
+Set the IP TTL field (time to live hops). 
+
+=back
+
+=head1 AUTHORS
+
+=over 4
+
+=item *
+
+Roland J. Schemers III, Stanford University, concept and versions 1.x
+
+=item *
+
+RL "Bob" Morgan, Stanford University, versions 2.x
+
+=item *
+
+David Papp, versions 2.3x and up
+
+=item *
+
+David Schweikert, versions 3.0 and up
+
+=back
+
+B<fping website: L<http://www.fping.org>>
+
+=head1 DIAGNOSTICS
+
+Exit status is 0 if all the hosts are reachable, 1 if some hosts
+were unreachable, 2 if any IP addresses were not found, 3 for invalid command
+line arguments, and 4 for a system call failure.
+
+=head1 RESTRICTIONS
+
+If certain options are used (i.e, a low value for B<-i> and B<-t>, and a high value
+for B<-r>) it is possible to flood the network. This program must be installed as
+setuid root in order to open up a raw socket, or must be run by root. In order
+to stop mere mortals from hosing the network, normal users can't specify the following: 
+
+=over 4
+
+=item *
+
+B<-i> I<n>, where I<n> < 10 msec
+
+=item *
+
+B<-r> I<n>, where I<n> > 20
+
+=item *
+
+B<-t> I<n>, where n < 250 msec
+
+=back
+
+=head1 SEE ALSO
+
+C<ping(8)>

fping.8

@@ -1,228 +0,0 @@
-.TH fping 8
-.SH NAME
-fping \- send ICMP ECHO_REQUEST packets to network hosts
-.SH SYNOPSIS
-.B fping
-[ \fIoptions\fR ]
-[ \fIsystems...\fR ]
-
-.SH DESCRIPTION
-.NXR "fping command"
-.NXR "ICMP ECHO_REQUEST"
-
-      
-.B fping 
-is a program like
-.B ping(8)
-which uses the Internet Control
-Message Protocol (ICMP) echo request to determine if a target host is
-responding. 
-.B fping 
-differs from ping in that you can specify any
-number of targets on the command line, or specify a file containing
-the lists of targets to ping. Instead of sending to one target until it
-times out or replies, 
-.B fping 
-will send out a ping packet and move
-on to the next target in a round-robin fashion. 
-.PP
-In the default mode, if a target replies,
-it is noted and removed from the list of targets to check; if a target
-does not respond within a certain time limit and/or retry limit it 
-is designated as unreachable.  
-.B fping 
-also supports sending a specified number of pings to a target, or
-looping indefinitely (as in 
-.B ping
-).
-.PP
-Unlike 
-.B ping,
-.B fping 
-is meant to be used in scripts, so its output is designed to be 
-easy to parse.
-.SH OPTIONS
-.IP \fB-a\fR 5
-Show systems that are alive.
-.IP \fB-A\fR 5
-Display targets by address rather than DNS name.
-.IP \fB-b\fIn\fR 5
-Number of bytes of ping data to send.  The minimum size (normally 12)
-allows room for the data that 
-.B fping 
-needs to do its work (sequence number, timestamp).  The reported
-received data size includes the IP header (normally 20 bytes) and ICMP
-header (8 bytes), so the minimum total size is 40 bytes.  Default is
-56, as in 
-.B ping.
-Maximum is the theoretical maximum IP datagram size (64K), though most
-systems limit this to a smaller, system-dependent number.
-.IP \fB-B\fIn\fR 5
-In the default mode,
-.B fping
-sends several requests to a target before giving up, waiting longer for
-a reply on each successive request.  This parameter is the value by
-which the wait time is multiplied on each successive request; it must
-be entered as a floating-point number (x.y).  The default is 1.5.
-.IP \fB-c\fR 5
-Number of request packets to send to each target.  In this mode, a
-line is displayed for each received response (this can suppressed with
--q or -Q).  Also, statistics about responses for each target are displayed
-when all requests have been sent (or when interrupted).
-.IP \fB-C\fR 5
-Similar to -c, but the per-target statistics are displayed in a format
-designed for automated response-time statistics gathering.  For
-example:
-
-% fping -C 5 -q somehost
-
-somehost : 91.7 37.0 29.2 - 36.8
-
-shows the response time in milliseconds for each of the five requests,
-with the "-" indicating that no response was received to the fourth
-request.
-.IP \fB-d\fR 5
-Use DNS to lookup address of return ping packet. This allows you to give
-fping a list of IP addresses as input and print hostnames in the output.
-.IP \fB-e\fR 5
-Show elapsed (round-trip) time of packets.
-.IP \fB-f\fR 5
-Read list of targets from a file.  This option can only be used by the
-root user.  Regular users should pipe in the file via stdin:
-
-% fping < targets_file
-
-.IP \fB-g\fR 5
-Generate a target list from a supplied IP netmask, or a starting and ending IP.
-Specify the netmask or start/end in the targets portion of the command line.
-
-ex. To ping the class C 192.168.1.x, the specified command line could look like either:
-
-fping -g 192.168.1.0/24
-
-or
-
-fping -g 192.168.1.0 192.168.1.255
-.IP \fB-h\fR 5
-Print usage message.
-.IP \fB-i\fIn\fR 5
-The minimum amount of time (in milliseconds) between sending a ping packet to any target (default is 25).
-.IP \fB-l\fR 5
-Loop sending packets to each target indefinitely.  Can be interrupted
-with ctl-C; statistics about responses for each target are then displayed.
-.IP \fB-m\fR 5
-Send pings to each of a target host's multiple interfaces.
-.IP \fB-n\fR 5
-Same as -d.
-.IP \fB-p\fR 5
-In looping or counting modes (-l, -c, or -C), this parameter sets the
-time in milliseconds that
-.B fping
-waits between successive packets to an individual target.  Default is
-1000.
-.IP \fB-q\fR 5
-Quiet. Don't show per-target results, just set final exit status.
-.IP \fB-Q\fIn\fR 5
-Like -q, but show summary results every n seconds.
-.IP \fB-r\fIn\fR 5
-Retry limit (default 3). This is the number of times an attempt at pinging
-a target will be made, not including the first try.
-.IP \fB-s\fR 5
-Print cumulative statistics upon exit.
-.IP \fB-S\fIaddr\fR 5
-Set source address.
-.IP \fB-I\fIif\fR 5
-Set the interface (requires SO_BINDTODEVICE support)
-.IP \fB-t\fIn\fR 5
-Initial target timeout in milliseconds (default 500). In the default
-mode, this is the amount of time that 
-.B fping
-waits for a response to its first request.  Successive timeouts are
-multiplied by the backoff factor.
-.IP \fB-T\fIn\fR 5
-Ignored (for compatibility with fping 2.4).
-.IP \fB-u\fR 5
-Show targets that are unreachable.
-.IP \fB-T\fIn\fR 5
-Set the typ of service flag (TOS). \fIn\fR can be either decimal or hexadecimal (0xh) format.
-.IP \fB-v\fR 5
-Print 
-.B fping
-version information.
-
-.SH EXAMPLES
-The following perl script will check a list of hosts and send mail if
-any are unreachable. It uses the open2 function which allows a program
-to be opened for reading and writing. fping does not start pinging the
-list of systems until it reads EOF, which it gets after INPUT is closed. 
-Sure the open2 usage is not needed in this example, but it's a good open2
-example none the less. 
-.nf
-
-#!/usr/bin/perl
-require 'open2.pl';
-
-$MAILTO = "root";
-
-$pid = &open2("OUTPUT","INPUT","/usr/local/bin/fping -u");
-
-@check=("slapshot","foo","foobar");
-
-foreach(@check) {  print INPUT "$_\\n"; }
-close(INPUT);
-@output=<OUTPUT>;
-
-if ($#output != -1) {
- chop($date=`date`);
- open(MAIL,"|mail -s 'unreachable systems' $MAILTO");
- print MAIL "\\nThe following systems are unreachable as of: $date\\n\\n";
- print MAIL @output;
- close MAIL;
-}
-
-.ni
-Another good example is when you want to perform an action only on hosts
-that are currently reachable.
-.nf
-
-#!/usr/bin/perl
-
-$hosts_to_backup = `cat /etc/hosts.backup | fping -a`;
-
-foreach $host (split(/\\n/,$hosts_to_backup)) {
-  # do it
-}
-
-.ni
-
-.SH AUTHORS
-.nf
-Roland J. Schemers III, Stanford University, concept and versions 1.x
-RL "Bob" Morgan, Stanford University, versions 2.x
-David Papp, versions 2.3x and up,
-David Schweikert, versions 3.0 and up
-fping website:  http://www.fping.org
-.ni
-.SH DIAGNOSTICS
-Exit status is 0 if all the hosts are reachable, 1 if some hosts were
-unreachable, 2 if any IP addresses were not found, 3 for invalid
-command line arguments, and 4 for a system call failure.
-.SH BUGS
-Ha! If we knew of any we would have fixed them!
-.SH RESTRICTIONS
-If certain options are used (i.e, a low value for -i and -t, and a 
-high value for -r) it is possible to flood the network. This program
-must be installed as setuid root in order to open up a raw socket,
-or must be run by root. In order to stop mere mortals from hosing the
-network (when fping is installed setuid root) , normal users can't specify 
-the following:
-.nf
-
- -i n   where n < 10  msec
- -r n   where n > 20
- -t n   where n < 250 msec
-
-.ni
-.SH SEE ALSO
-netstat(1), ping(8), ifconfig(8c)
-

install-sh

@@ -1,520 +0,0 @@
-#!/bin/sh
-# install - install a program, script, or datafile
-
-scriptversion=2009-04-28.21; # UTC
-
-# This originates from X11R5 (mit/util/scripts/install.sh), which was
-# later released in X11R6 (xc/config/util/install.sh) with the
-# following copyright and license.
-#
-# Copyright (C) 1994 X Consortium
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to
-# deal in the Software without restriction, including without limitation the
-# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
-# sell copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
-# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
-# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-#
-# Except as contained in this notice, the name of the X Consortium shall not
-# be used in advertising or otherwise to promote the sale, use or other deal-
-# ings in this Software without prior written authorization from the X Consor-
-# tium.
-#
-#
-# FSF changes to this file are in the public domain.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.
-
-nl='
-'
-IFS=" ""	$nl"
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit=${DOITPROG-}
-if test -z "$doit"; then
-  doit_exec=exec
-else
-  doit_exec=$doit
-fi
-
-# Put in absolute file names if you don't have them in your path;
-# or use environment vars.
-
-chgrpprog=${CHGRPPROG-chgrp}
-chmodprog=${CHMODPROG-chmod}
-chownprog=${CHOWNPROG-chown}
-cmpprog=${CMPPROG-cmp}
-cpprog=${CPPROG-cp}
-mkdirprog=${MKDIRPROG-mkdir}
-mvprog=${MVPROG-mv}
-rmprog=${RMPROG-rm}
-stripprog=${STRIPPROG-strip}
-
-posix_glob='?'
-initialize_posix_glob='
-  test "$posix_glob" != "?" || {
-    if (set -f) 2>/dev/null; then
-      posix_glob=
-    else
-      posix_glob=:
-    fi
-  }
-'
-
-posix_mkdir=
-
-# Desired mode of installed file.
-mode=0755
-
-chgrpcmd=
-chmodcmd=$chmodprog
-chowncmd=
-mvcmd=$mvprog
-rmcmd="$rmprog -f"
-stripcmd=
-
-src=
-dst=
-dir_arg=
-dst_arg=
-
-copy_on_change=false
-no_target_directory=
-
-usage="\
-Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
-   or: $0 [OPTION]... SRCFILES... DIRECTORY
-   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
-   or: $0 [OPTION]... -d DIRECTORIES...
-
-In the 1st form, copy SRCFILE to DSTFILE.
-In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
-In the 4th, create DIRECTORIES.
-
-Options:
-     --help     display this help and exit.
-     --version  display version info and exit.
-
-  -c            (ignored)
-  -C            install only if different (preserve the last data modification time)
-  -d            create directories instead of installing files.
-  -g GROUP      $chgrpprog installed files to GROUP.
-  -m MODE       $chmodprog installed files to MODE.
-  -o USER       $chownprog installed files to USER.
-  -s            $stripprog installed files.
-  -t DIRECTORY  install into DIRECTORY.
-  -T            report an error if DSTFILE is a directory.
-
-Environment variables override the default commands:
-  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
-  RMPROG STRIPPROG
-"
-
-while test $# -ne 0; do
-  case $1 in
-    -c) ;;
-
-    -C) copy_on_change=true;;
-
-    -d) dir_arg=true;;
-
-    -g) chgrpcmd="$chgrpprog $2"
-	shift;;
-
-    --help) echo "$usage"; exit $?;;
-
-    -m) mode=$2
-	case $mode in
-	  *' '* | *'	'* | *'
-'*	  | *'*'* | *'?'* | *'['*)
-	    echo "$0: invalid mode: $mode" >&2
-	    exit 1;;
-	esac
-	shift;;
-
-    -o) chowncmd="$chownprog $2"
-	shift;;
-
-    -s) stripcmd=$stripprog;;
-
-    -t) dst_arg=$2
-	shift;;
-
-    -T) no_target_directory=true;;
-
-    --version) echo "$0 $scriptversion"; exit $?;;
-
-    --)	shift
-	break;;
-
-    -*)	echo "$0: invalid option: $1" >&2
-	exit 1;;
-
-    *)  break;;
-  esac
-  shift
-done
-
-if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
-  # When -d is used, all remaining arguments are directories to create.
-  # When -t is used, the destination is already specified.
-  # Otherwise, the last argument is the destination.  Remove it from $@.
-  for arg
-  do
-    if test -n "$dst_arg"; then
-      # $@ is not empty: it contains at least $arg.
-      set fnord "$@" "$dst_arg"
-      shift # fnord
-    fi
-    shift # arg
-    dst_arg=$arg
-  done
-fi
-
-if test $# -eq 0; then
-  if test -z "$dir_arg"; then
-    echo "$0: no input file specified." >&2
-    exit 1
-  fi
-  # It's OK to call `install-sh -d' without argument.
-  # This can happen when creating conditional directories.
-  exit 0
-fi
-
-if test -z "$dir_arg"; then
-  trap '(exit $?); exit' 1 2 13 15
-
-  # Set umask so as not to create temps with too-generous modes.
-  # However, 'strip' requires both read and write access to temps.
-  case $mode in
-    # Optimize common cases.
-    *644) cp_umask=133;;
-    *755) cp_umask=22;;
-
-    *[0-7])
-      if test -z "$stripcmd"; then
-	u_plus_rw=
-      else
-	u_plus_rw='% 200'
-      fi
-      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
-    *)
-      if test -z "$stripcmd"; then
-	u_plus_rw=
-      else
-	u_plus_rw=,u+rw
-      fi
-      cp_umask=$mode$u_plus_rw;;
-  esac
-fi
-
-for src
-do
-  # Protect names starting with `-'.
-  case $src in
-    -*) src=./$src;;
-  esac
-
-  if test -n "$dir_arg"; then
-    dst=$src
-    dstdir=$dst
-    test -d "$dstdir"
-    dstdir_status=$?
-  else
-
-    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
-    # might cause directories to be created, which would be especially bad
-    # if $src (and thus $dsttmp) contains '*'.
-    if test ! -f "$src" && test ! -d "$src"; then
-      echo "$0: $src does not exist." >&2
-      exit 1
-    fi
-
-    if test -z "$dst_arg"; then
-      echo "$0: no destination specified." >&2
-      exit 1
-    fi
-
-    dst=$dst_arg
-    # Protect names starting with `-'.
-    case $dst in
-      -*) dst=./$dst;;
-    esac
-
-    # If destination is a directory, append the input filename; won't work
-    # if double slashes aren't ignored.
-    if test -d "$dst"; then
-      if test -n "$no_target_directory"; then
-	echo "$0: $dst_arg: Is a directory" >&2
-	exit 1
-      fi
-      dstdir=$dst
-      dst=$dstdir/`basename "$src"`
-      dstdir_status=0
-    else
-      # Prefer dirname, but fall back on a substitute if dirname fails.
-      dstdir=`
-	(dirname "$dst") 2>/dev/null ||
-	expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	     X"$dst" : 'X\(//\)[^/]' \| \
-	     X"$dst" : 'X\(//\)$' \| \
-	     X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
-	echo X"$dst" |
-	    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\/\)[^/].*/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\/\)$/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\).*/{
-		   s//\1/
-		   q
-		 }
-		 s/.*/./; q'
-      `
-
-      test -d "$dstdir"
-      dstdir_status=$?
-    fi
-  fi
-
-  obsolete_mkdir_used=false
-
-  if test $dstdir_status != 0; then
-    case $posix_mkdir in
-      '')
-	# Create intermediate dirs using mode 755 as modified by the umask.
-	# This is like FreeBSD 'install' as of 1997-10-28.
-	umask=`umask`
-	case $stripcmd.$umask in
-	  # Optimize common cases.
-	  *[2367][2367]) mkdir_umask=$umask;;
-	  .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
-
-	  *[0-7])
-	    mkdir_umask=`expr $umask + 22 \
-	      - $umask % 100 % 40 + $umask % 20 \
-	      - $umask % 10 % 4 + $umask % 2
-	    `;;
-	  *) mkdir_umask=$umask,go-w;;
-	esac
-
-	# With -d, create the new directory with the user-specified mode.
-	# Otherwise, rely on $mkdir_umask.
-	if test -n "$dir_arg"; then
-	  mkdir_mode=-m$mode
-	else
-	  mkdir_mode=
-	fi
-
-	posix_mkdir=false
-	case $umask in
-	  *[123567][0-7][0-7])
-	    # POSIX mkdir -p sets u+wx bits regardless of umask, which
-	    # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
-	    ;;
-	  *)
-	    tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
-	    trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
-
-	    if (umask $mkdir_umask &&
-		exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
-	    then
-	      if test -z "$dir_arg" || {
-		   # Check for POSIX incompatibilities with -m.
-		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
-		   # other-writeable bit of parent directory when it shouldn't.
-		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
-		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
-		   case $ls_ld_tmpdir in
-		     d????-?r-*) different_mode=700;;
-		     d????-?--*) different_mode=755;;
-		     *) false;;
-		   esac &&
-		   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
-		     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
-		     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
-		   }
-		 }
-	      then posix_mkdir=:
-	      fi
-	      rmdir "$tmpdir/d" "$tmpdir"
-	    else
-	      # Remove any dirs left behind by ancient mkdir implementations.
-	      rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
-	    fi
-	    trap '' 0;;
-	esac;;
-    esac
-
-    if
-      $posix_mkdir && (
-	umask $mkdir_umask &&
-	$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
-      )
-    then :
-    else
-
-      # The umask is ridiculous, or mkdir does not conform to POSIX,
-      # or it failed possibly due to a race condition.  Create the
-      # directory the slow way, step by step, checking for races as we go.
-
-      case $dstdir in
-	/*) prefix='/';;
-	-*) prefix='./';;
-	*)  prefix='';;
-      esac
-
-      eval "$initialize_posix_glob"
-
-      oIFS=$IFS
-      IFS=/
-      $posix_glob set -f
-      set fnord $dstdir
-      shift
-      $posix_glob set +f
-      IFS=$oIFS
-
-      prefixes=
-
-      for d
-      do
-	test -z "$d" && continue
-
-	prefix=$prefix$d
-	if test -d "$prefix"; then
-	  prefixes=
-	else
-	  if $posix_mkdir; then
-	    (umask=$mkdir_umask &&
-	     $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
-	    # Don't fail if two instances are running concurrently.
-	    test -d "$prefix" || exit 1
-	  else
-	    case $prefix in
-	      *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
-	      *) qprefix=$prefix;;
-	    esac
-	    prefixes="$prefixes '$qprefix'"
-	  fi
-	fi
-	prefix=$prefix/
-      done
-
-      if test -n "$prefixes"; then
-	# Don't fail if two instances are running concurrently.
-	(umask $mkdir_umask &&
-	 eval "\$doit_exec \$mkdirprog $prefixes") ||
-	  test -d "$dstdir" || exit 1
-	obsolete_mkdir_used=true
-      fi
-    fi
-  fi
-
-  if test -n "$dir_arg"; then
-    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
-    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
-    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
-      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
-  else
-
-    # Make a couple of temp file names in the proper directory.
-    dsttmp=$dstdir/_inst.$$_
-    rmtmp=$dstdir/_rm.$$_
-
-    # Trap to clean up those temp files at exit.
-    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
-
-    # Copy the file name to the temp name.
-    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
-
-    # and set any options; do chmod last to preserve setuid bits.
-    #
-    # If any of these fail, we abort the whole thing.  If we want to
-    # ignore errors from any of these, just make sure not to ignore
-    # errors from the above "$doit $cpprog $src $dsttmp" command.
-    #
-    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
-    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
-    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
-    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
-
-    # If -C, don't bother to copy if it wouldn't change the file.
-    if $copy_on_change &&
-       old=`LC_ALL=C ls -dlL "$dst"	2>/dev/null` &&
-       new=`LC_ALL=C ls -dlL "$dsttmp"	2>/dev/null` &&
-
-       eval "$initialize_posix_glob" &&
-       $posix_glob set -f &&
-       set X $old && old=:$2:$4:$5:$6 &&
-       set X $new && new=:$2:$4:$5:$6 &&
-       $posix_glob set +f &&
-
-       test "$old" = "$new" &&
-       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
-    then
-      rm -f "$dsttmp"
-    else
-      # Rename the file to the real destination.
-      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
-
-      # The rename failed, perhaps because mv can't rename something else
-      # to itself, or perhaps because mv is so ancient that it does not
-      # support -f.
-      {
-	# Now remove or move aside any old file at destination location.
-	# We try this two ways since rm can't unlink itself on some
-	# systems and the destination file might be busy for other
-	# reasons.  In this case, the final cleanup might fail but the new
-	# file should still install successfully.
-	{
-	  test ! -f "$dst" ||
-	  $doit $rmcmd -f "$dst" 2>/dev/null ||
-	  { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
-	    { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
-	  } ||
-	  { echo "$0: cannot unlink or rename $dst" >&2
-	    (exit 1); exit 1
-	  }
-	} &&
-
-	# Now rename the file to the real destination.
-	$doit $mvcmd "$dsttmp" "$dst"
-      }
-    fi || exit 1
-
-    trap '' 0
-  fi
-done
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:

linux.h

@@ -1,133 +0,0 @@
-/*
-** Special compatibility definitions for linux.
-**
-**	On the linux platform, several IP-related structures have
-**	different names. Also some of the structure fields have
-**	other names, although the layout is (obviously) fixed.
-**	Several constants are not defined in the standard files.
-**
-**	@(#)linux.h             e07@nikhef.nl (Eric Wassenaar) 960301
-*/
-
-#if defined(linux)
-
-#include <endian.h>		/* to get the proper BYTE_ORDER */
-
-#if !defined(BYTE_ORDER) || (BYTE_ORDER != BIG_ENDIAN && \
-     BYTE_ORDER != LITTLE_ENDIAN && BYTE_ORDER != PDP_ENDIAN)
-error "Undefined or invalid BYTE_ORDER";
-#endif
-
-/*
- * Structure of an ip header, without options.
- */
-
-#define	IPVERSION	4
-
-struct ip {
-#if (BYTE_ORDER == LITTLE_ENDIAN || BYTE_ORDER == PDP_ENDIAN)
-	u_char	ip_hl:4,		/* header length */
-		ip_v:4;			/* version */
-#else
-	u_char	ip_v:4,			/* version */
-		ip_hl:4;		/* header length */
-#endif
-	u_char	ip_tos;			/* type of service */
-	short	ip_len;			/* total length */
-	u_short	ip_id;			/* identification */
-	short	ip_off;			/* fragment offset field */
-#define	IP_DF 0x4000			/* dont fragment flag */
-#define	IP_MF 0x2000			/* more fragments flag */
-	u_char	ip_ttl;			/* time to live */
-	u_char	ip_p;			/* protocol */
-	u_short	ip_sum;			/* checksum */
-	struct	in_addr ip_src,ip_dst;	/* source and dest address */
-};
-
-#define	IP_MAXPACKET	65535		/* maximum packet size */
-
-/*
- * Structure of an icmp header.
- */
-
-struct icmp {
-	u_char	icmp_type;		/* type of message, see below */
-	u_char	icmp_code;		/* type sub code */
-	u_short	icmp_cksum;		/* ones complement cksum of struct */
-	union {
-		u_char ih_pptr;			/* ICMP_PARAMPROB */
-		struct in_addr ih_gwaddr;	/* ICMP_REDIRECT */
-		struct ih_idseq {
-			n_short	icd_id;
-			n_short	icd_seq;
-		} ih_idseq;
-		int ih_void;
-	} icmp_hun;
-#define	icmp_pptr	icmp_hun.ih_pptr
-#define	icmp_gwaddr	icmp_hun.ih_gwaddr
-#define	icmp_id		icmp_hun.ih_idseq.icd_id
-#define	icmp_seq	icmp_hun.ih_idseq.icd_seq
-#define	icmp_void	icmp_hun.ih_void
-	union {
-		struct id_ts {
-			n_time its_otime;
-			n_time its_rtime;
-			n_time its_ttime;
-		} id_ts;
-		struct id_ip  {
-			struct ip idi_ip;
-			/* options and then 64 bits of data */
-		} id_ip;
-		u_long	id_mask;
-		char	id_data[1];
-	} icmp_dun;
-#define	icmp_otime	icmp_dun.id_ts.its_otime
-#define	icmp_rtime	icmp_dun.id_ts.its_rtime
-#define	icmp_ttime	icmp_dun.id_ts.its_ttime
-#define	icmp_ip		icmp_dun.id_ip.idi_ip
-#define	icmp_mask	icmp_dun.id_mask
-#define	icmp_data	icmp_dun.id_data
-};
-
-#define	ICMP_MINLEN	8		/* abs minimum */
-
-/*
- * Definition of icmp type and code field values.
- */
-
-#define	ICMP_ECHOREPLY		0		/* echo reply */
-#define	ICMP_UNREACH		3		/* dest unreachable, codes: */
-#define		ICMP_UNREACH_NET	0		/* bad net */
-#define		ICMP_UNREACH_HOST	1		/* bad host */
-#define		ICMP_UNREACH_PROTOCOL	2		/* bad protocol */
-#define		ICMP_UNREACH_PORT	3		/* bad port */
-#define		ICMP_UNREACH_NEEDFRAG	4		/* IP_DF caused drop */
-#define		ICMP_UNREACH_SRCFAIL	5		/* src route failed */
-#define	ICMP_SOURCEQUENCH	4		/* packet lost, slow down */
-#define	ICMP_REDIRECT		5		/* shorter route, codes: */
-#define		ICMP_REDIRECT_NET	0		/* for network */
-#define		ICMP_REDIRECT_HOST	1		/* for host */
-#define		ICMP_REDIRECT_TOSNET	2		/* for tos and net */
-#define		ICMP_REDIRECT_TOSHOST	3		/* for tos and host */
-#define	ICMP_ECHO		8		/* echo service */
-#define	ICMP_TIMXCEED		11		/* time exceeded, code: */
-#define		ICMP_TIMXCEED_INTRANS	0		/* ttl==0 in transit */
-#define		ICMP_TIMXCEED_REASS	1		/* ttl==0 in reass */
-#define	ICMP_PARAMPROB		12		/* ip header bad */
-#define	ICMP_TSTAMP		13		/* timestamp request */
-#define	ICMP_TSTAMPREPLY	14		/* timestamp reply */
-#define	ICMP_IREQ		15		/* information request */
-#define	ICMP_IREQREPLY		16		/* information reply */
-#define	ICMP_MASKREQ		17		/* address mask request */
-#define	ICMP_MASKREPLY		18		/* address mask reply */
-
-/*
- * Definitions needed for the udp header structure.
- */
-
-#define uh_sport	source
-#define uh_dport	dest
-#define uh_ulen		len
-#define uh_sum		check
-
-#endif /* linux */

missing

@@ -1,376 +0,0 @@
-#! /bin/sh
-# Common stub for a few missing GNU programs while installing.
-
-scriptversion=2009-04-28.21; # UTC
-
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
-# 2008, 2009 Free Software Foundation, Inc.
-# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-if test $# -eq 0; then
-  echo 1>&2 "Try \`$0 --help' for more information"
-  exit 1
-fi
-
-run=:
-sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
-sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
-
-# In the cases where this matters, `missing' is being run in the
-# srcdir already.
-if test -f configure.ac; then
-  configure_ac=configure.ac
-else
-  configure_ac=configure.in
-fi
-
-msg="missing on your system"
-
-case $1 in
---run)
-  # Try to run requested program, and just exit if it succeeds.
-  run=
-  shift
-  "$@" && exit 0
-  # Exit code 63 means version mismatch.  This often happens
-  # when the user try to use an ancient version of a tool on
-  # a file that requires a minimum version.  In this case we
-  # we should proceed has if the program had been absent, or
-  # if --run hadn't been passed.
-  if test $? = 63; then
-    run=:
-    msg="probably too old"
-  fi
-  ;;
-
-  -h|--h|--he|--hel|--help)
-    echo "\
-$0 [OPTION]... PROGRAM [ARGUMENT]...
-
-Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
-
-Options:
-  -h, --help      display this help and exit
-  -v, --version   output version information and exit
-  --run           try to run the given command, and emulate it if it fails
-
-Supported PROGRAM values:
-  aclocal      touch file \`aclocal.m4'
-  autoconf     touch file \`configure'
-  autoheader   touch file \`config.h.in'
-  autom4te     touch the output file, or create a stub one
-  automake     touch all \`Makefile.in' files
-  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
-  flex         create \`lex.yy.c', if possible, from existing .c
-  help2man     touch the output file
-  lex          create \`lex.yy.c', if possible, from existing .c
-  makeinfo     touch the output file
-  tar          try tar, gnutar, gtar, then tar without non-portable flags
-  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
-
-Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
-\`g' are ignored when checking the name.
-
-Send bug reports to <bug-automake@gnu.org>."
-    exit $?
-    ;;
-
-  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
-    echo "missing $scriptversion (GNU Automake)"
-    exit $?
-    ;;
-
-  -*)
-    echo 1>&2 "$0: Unknown \`$1' option"
-    echo 1>&2 "Try \`$0 --help' for more information"
-    exit 1
-    ;;
-
-esac
-
-# normalize program name to check for.
-program=`echo "$1" | sed '
-  s/^gnu-//; t
-  s/^gnu//; t
-  s/^g//; t'`
-
-# Now exit if we have it, but it failed.  Also exit now if we
-# don't have it and --version was passed (most likely to detect
-# the program).  This is about non-GNU programs, so use $1 not
-# $program.
-case $1 in
-  lex*|yacc*)
-    # Not GNU programs, they don't have --version.
-    ;;
-
-  tar*)
-    if test -n "$run"; then
-       echo 1>&2 "ERROR: \`tar' requires --run"
-       exit 1
-    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
-       exit 1
-    fi
-    ;;
-
-  *)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
-       # Could not run --version or --help.  This is probably someone
-       # running `$TOOL --version' or `$TOOL --help' to check whether
-       # $TOOL exists and not knowing $TOOL uses missing.
-       exit 1
-    fi
-    ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case $program in
-  aclocal*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
-         to install the \`Automake' and \`Perl' packages.  Grab them from
-         any GNU archive site."
-    touch aclocal.m4
-    ;;
-
-  autoconf*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`${configure_ac}'.  You might want to install the
-         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
-         archive site."
-    touch configure
-    ;;
-
-  autoheader*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
-         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
-         from any GNU archive site."
-    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
-    test -z "$files" && files="config.h"
-    touch_files=
-    for f in $files; do
-      case $f in
-      *:*) touch_files="$touch_files "`echo "$f" |
-				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
-      *) touch_files="$touch_files $f.in";;
-      esac
-    done
-    touch $touch_files
-    ;;
-
-  automake*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
-         You might want to install the \`Automake' and \`Perl' packages.
-         Grab them from any GNU archive site."
-    find . -type f -name Makefile.am -print |
-	   sed 's/\.am$/.in/' |
-	   while read f; do touch "$f"; done
-    ;;
-
-  autom4te*)
-    echo 1>&2 "\
-WARNING: \`$1' is needed, but is $msg.
-         You might have modified some files without having the
-         proper tools for further handling them.
-         You can get \`$1' as part of \`Autoconf' from any GNU
-         archive site."
-
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -f "$file"; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo "#! /bin/sh"
-	echo "# Created by GNU Automake missing as a replacement of"
-	echo "#  $ $@"
-	echo "exit 0"
-	chmod +x $file
-	exit 1
-    fi
-    ;;
-
-  bison*|yacc*)
-    echo 1>&2 "\
-WARNING: \`$1' $msg.  You should only need it if
-         you modified a \`.y' file.  You may need the \`Bison' package
-         in order for those modifications to take effect.  You can get
-         \`Bison' from any GNU archive site."
-    rm -f y.tab.c y.tab.h
-    if test $# -ne 1; then
-        eval LASTARG="\${$#}"
-	case $LASTARG in
-	*.y)
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
-	    if test -f "$SRCFILE"; then
-	         cp "$SRCFILE" y.tab.c
-	    fi
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
-	    if test -f "$SRCFILE"; then
-	         cp "$SRCFILE" y.tab.h
-	    fi
-	  ;;
-	esac
-    fi
-    if test ! -f y.tab.h; then
-	echo >y.tab.h
-    fi
-    if test ! -f y.tab.c; then
-	echo 'main() { return 0; }' >y.tab.c
-    fi
-    ;;
-
-  lex*|flex*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified a \`.l' file.  You may need the \`Flex' package
-         in order for those modifications to take effect.  You can get
-         \`Flex' from any GNU archive site."
-    rm -f lex.yy.c
-    if test $# -ne 1; then
-        eval LASTARG="\${$#}"
-	case $LASTARG in
-	*.l)
-	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
-	    if test -f "$SRCFILE"; then
-	         cp "$SRCFILE" lex.yy.c
-	    fi
-	  ;;
-	esac
-    fi
-    if test ! -f lex.yy.c; then
-	echo 'main() { return 0; }' >lex.yy.c
-    fi
-    ;;
-
-  help2man*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-	 you modified a dependency of a manual page.  You may need the
-	 \`Help2man' package in order for those modifications to take
-	 effect.  You can get \`Help2man' from any GNU archive site."
-
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -f "$file"; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo ".ab help2man is required to generate this page"
-	exit $?
-    fi
-    ;;
-
-  makeinfo*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified a \`.texi' or \`.texinfo' file, or any other file
-         indirectly affecting the aspect of the manual.  The spurious
-         call might also be the consequence of using a buggy \`make' (AIX,
-         DU, IRIX).  You might want to install the \`Texinfo' package or
-         the \`GNU make' package.  Grab either from any GNU archive site."
-    # The file to touch is that specified with -o ...
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -z "$file"; then
-      # ... or it is the one specified with @setfilename ...
-      infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
-      file=`sed -n '
-	/^@setfilename/{
-	  s/.* \([^ ]*\) *$/\1/
-	  p
-	  q
-	}' $infile`
-      # ... or it is derived from the source name (dir/f.texi becomes f.info)
-      test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
-    fi
-    # If the file does not exist, the user really needs makeinfo;
-    # let's fail without touching anything.
-    test -f $file || exit 1
-    touch $file
-    ;;
-
-  tar*)
-    shift
-
-    # We have already tried tar in the generic part.
-    # Look for gnutar/gtar before invocation to avoid ugly error
-    # messages.
-    if (gnutar --version > /dev/null 2>&1); then
-       gnutar "$@" && exit 0
-    fi
-    if (gtar --version > /dev/null 2>&1); then
-       gtar "$@" && exit 0
-    fi
-    firstarg="$1"
-    if shift; then
-	case $firstarg in
-	*o*)
-	    firstarg=`echo "$firstarg" | sed s/o//`
-	    tar "$firstarg" "$@" && exit 0
-	    ;;
-	esac
-	case $firstarg in
-	*h*)
-	    firstarg=`echo "$firstarg" | sed s/h//`
-	    tar "$firstarg" "$@" && exit 0
-	    ;;
-	esac
-    fi
-
-    echo 1>&2 "\
-WARNING: I can't seem to be able to run \`tar' with the given arguments.
-         You may want to install GNU tar or Free paxutils, or check the
-         command line arguments."
-    exit 1
-    ;;
-
-  *)
-    echo 1>&2 "\
-WARNING: \`$1' is needed, and is $msg.
-         You might have modified some files without having the
-         proper tools for further handling them.  Check the \`README' file,
-         it often tells you about the needed prerequisites for installing
-         this package.  You may also peek at any GNU archive site, in case
-         some other package would contain this missing \`$1' program."
-    exit 1
-    ;;
-esac
-
-exit 0
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:

mkinstalldirs

@@ -1,36 +0,0 @@
-#! /bin/sh
-# mkinstalldirs --- make directory hierarchy
-# Author: Noah Friedman <friedman@prep.ai.mit.edu>
-# Created: 1993-05-16
-# Last modified: 1994-03-25
-# Public domain
-
-errstatus=0
-
-for file in ${1+"$@"} ; do 
-   set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
-   shift
-
-   pathcomp=
-   for d in ${1+"$@"} ; do
-     pathcomp="$pathcomp$d"
-     case "$pathcomp" in
-       -* ) pathcomp=./$pathcomp ;;
-     esac
-
-     if test ! -d "$pathcomp"; then
-        echo "mkdir $pathcomp" 1>&2
-        mkdir "$pathcomp" > /dev/null 2>&1 || lasterr=$?
-     fi
-
-     if test ! -d "$pathcomp"; then
-	errstatus=$lasterr
-     fi
-
-     pathcomp="$pathcomp/"
-   done
-done
-
-exit $errstatus
-
-# mkinstalldirs ends here

src/Makefile.am

@@ -0,0 +1,16 @@
+prog =
+
+if IPV4
+prog += fping
+endif
+if IPV6
+prog += fping6
+endif
+
+sbin_PROGRAMS = ${prog}
+
+fping_SOURCES = fping.c seqmap.c socket.c socket4.c fping.h options.h seqmap.h
+fping_DEPENDENCIES = ../config.h
+fping6_SOURCES = fping.c seqmap.c socket.c socket6.c fping.h options.h seqmap.h
+fping6_DEPENDENCIES = ../config.h
+fping6_CFLAGS = $(AM_CFLAGS) -DIPV6

src/fping.h

@@ -0,0 +1,27 @@
+#ifndef _FPING_H
+#define _FPING_H
+
+#define __APPLE_USE_RFC_3542 1
+
+#include <sys/socket.h>
+#include <netinet/in.h>
+
+#ifndef IPV6
+#define FPING_SOCKADDR struct sockaddr_in
+#define FPING_INADDR   struct in_addr
+#define FPING_ICMPHDR  struct icmp
+#else
+#define FPING_SOCKADDR struct sockaddr_in6
+#define FPING_INADDR   struct in6_addr
+#define FPING_ICMPHDR  struct icmp6_hdr
+#endif
+
+/* fping.c */
+void crash_and_burn( char *message );
+void errno_crash_and_burn( char *message );
+
+/* socket.c */
+int open_ping_socket();
+void socket_set_src_addr(int s, FPING_INADDR src_addr);
+
+#endif

src/seqmap.c

@@ -0,0 +1,119 @@
+/* 
+ * fping: fast-ping, file-ping, favorite-ping, funky-ping
+ *
+ *   Ping a list of target hosts in a round robin fashion.
+ *   A better ping overall.
+ *
+ * fping website:  http://www.fping.org
+ *
+ * Current maintainer of fping: David Schweikert
+ * Please send suggestions and patches to: david@schweikert.ch
+ *
+ *
+ * Original author:  Roland Schemers  <schemers@stanford.edu>
+ * IPv6 Support:     Jeroen Massar    <jeroen@unfix.org / jeroen@ipng.nl>
+ * Improved main loop: David Schweikert <david@schweikert.ch>
+ * Debian Merge, TOS settings: Tobi Oetiker <tobi@oetiker.ch>
+ * Bugfixes, byte order & senseful seq.-numbers: Stephan Fuhrmann (stephan.fuhrmann AT 1und1.de)
+ *
+ *
+ * Redistribution and use in source and binary forms are permitted
+ * provided that the above copyright notice and this paragraph are
+ * duplicated in all such forms and that any documentation,
+ * advertising materials, and other materials related to such
+ * distribution and use acknowledge that the software was developed
+ * by Stanford University.  The name of the University may not be used 
+ * to endorse or promote products derived from this software without 
+ * specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ * seqmap.c: implementation of a mapping between sequence number and (host, ping_nr)
+ *           we can't just use ping_nr*host_count + host_nr, because it can
+ *           overflow the 16 bit of the icmp header field. See also:
+ *           https://github.com/schweikert/fping/issues/48
+ */
+
+#include "seqmap.h"
+#include "options.h"
+#include "limits.h"
+
+#include <stdlib.h>
+#include <stdio.h>
+
+/* description of the data structure used:
+ *
+ * - we assume that no more than SEQMAP_MAXSEQ (65535) pings are sent in
+ *   the timeout interval (SEQMAP_TIMEOUT_IN_S)
+ * - we store the values in an array with SEQMAP_MAXSEQ elements
+ * - current sequence number % SEQMAP_MAXSEQ gives the current index
+ * - when entering a value, we check that the current entry is expired
+ */
+
+static SEQMAP_VALUE *seqmap_map = NULL;
+static unsigned int seqmap_next_id = 0;
+static SEQMAP_VALUE *seqmap_free_list;
+
+#define SEQMAP_TIMEOUT_IN_S       10
+#define SEQMAP_UNASSIGNED_HOST_NR UINT_MAX
+
+void seqmap_init()
+{
+    unsigned int i;
+
+    seqmap_map = calloc(SEQMAP_MAXSEQ, sizeof(SEQMAP_VALUE));
+    if(seqmap_map == NULL) {
+        perror("malloc error (can't allocate seqmap_map)");
+    }
+}
+
+unsigned int seqmap_add(unsigned int host_nr, unsigned int ping_count, struct timeval *now)
+{
+    unsigned int current_id;
+    SEQMAP_VALUE *next_value;
+
+    if(!seqmap_map) {
+        fprintf(stderr, "fping internal error: seqmap not initialized.\n");
+        exit(4);
+    }
+
+    /* check if expired (note that unused seqmap values will have fields set to
+     * 0, so will be seen as expired */
+    next_value = &seqmap_map[seqmap_next_id];
+    if(next_value->ping_ts.tv_sec != 0 && (now->tv_sec - next_value->ping_ts.tv_sec) < SEQMAP_TIMEOUT_IN_S) {
+        fprintf(stderr, "fping error: not enough sequence numbers available! (expire_timeout=%d, host_nr=%d, ping_count=%d, seqmap_next_id=%d)\n",
+            SEQMAP_TIMEOUT_IN_S, host_nr, ping_count, seqmap_next_id);
+        exit(4);
+    }
+
+    /* store the value */
+    next_value->host_nr = host_nr;
+    next_value->ping_count = ping_count;
+    next_value->ping_ts.tv_sec = now->tv_sec;
+    next_value->ping_ts.tv_usec = now->tv_usec;
+
+    /* increase next id */
+    current_id = seqmap_next_id;
+    seqmap_next_id = (seqmap_next_id + 1) % SEQMAP_MAXSEQ;
+
+    return current_id;
+}
+
+SEQMAP_VALUE *seqmap_fetch(unsigned int id, struct timeval *now)
+{
+    SEQMAP_VALUE *value;
+
+    if(id > SEQMAP_MAXSEQ) {
+        return NULL;
+    }
+
+    value = &seqmap_map[id];
+
+    /* verify that value is not expired */
+    if(now->tv_sec - value->ping_ts.tv_sec >= SEQMAP_TIMEOUT_IN_S) {
+        return NULL;
+    }
+
+    return value;
+}

src/seqmap.h

@@ -0,0 +1,20 @@
+#ifndef SEQMAP_H
+#define SEQMAP_H
+
+#include <sys/time.h>
+
+typedef struct seqmap_value
+{
+    unsigned int    host_nr;
+    unsigned int    ping_count;
+    struct timeval  ping_ts;
+
+} SEQMAP_VALUE;
+
+#define SEQMAP_MAXSEQ 65535
+
+void seqmap_init();
+unsigned int seqmap_add(unsigned int host_nr, unsigned int ping_count, struct timeval *now);
+SEQMAP_VALUE *seqmap_fetch(unsigned int id, struct timeval *now);
+
+#endif

src/socket.c

@@ -0,0 +1,57 @@
+/* 
+ * fping: fast-ping, file-ping, favorite-ping, funky-ping
+ *
+ *   Ping a list of target hosts in a round robin fashion.
+ *   A better ping overall.
+ *
+ * fping website:  http://www.fping.org
+ *
+ * Current maintainer of fping: David Schweikert
+ * Please send suggestions and patches to: david@schweikert.ch
+ *
+ *
+ * Original author:  Roland Schemers  <schemers@stanford.edu>
+ * IPv6 Support:     Jeroen Massar    <jeroen@unfix.org / jeroen@ipng.nl>
+ * Improved main loop: David Schweikert <david@schweikert.ch>
+ * Debian Merge, TOS settings: Tobi Oetiker <tobi@oetiker.ch>
+ * Bugfixes, byte order & senseful seq.-numbers: Stephan Fuhrmann (stephan.fuhrmann AT 1und1.de)
+ *
+ *
+ * Redistribution and use in source and binary forms are permitted
+ * provided that the above copyright notice and this paragraph are
+ * duplicated in all such forms and that any documentation,
+ * advertising materials, and other materials related to such
+ * distribution and use acknowledge that the software was developed
+ * by Stanford University.  The name of the University may not be used 
+ * to endorse or promote products derived from this software without 
+ * specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#include "fping.h"
+#include "config.h"
+
+int open_ping_socket_ipv4();
+int open_ping_socket_ipv6();
+void socket_set_src_addr_ipv4(int s, FPING_INADDR src_addr);
+void socket_set_src_addr_ipv6(int s, FPING_INADDR src_addr);
+
+int open_ping_socket()
+{
+#ifndef IPV6
+    return open_ping_socket_ipv4();
+#else
+    return open_ping_socket_ipv6();
+#endif
+}
+
+void socket_set_src_addr(int s, FPING_INADDR src_addr)
+{
+#ifndef IPV6
+    socket_set_src_addr_ipv4(s, src_addr);
+#else
+    socket_set_src_addr_ipv6(s, src_addr);
+#endif
+}

src/socket4.c

@@ -0,0 +1,73 @@
+/* 
+ * fping: fast-ping, file-ping, favorite-ping, funky-ping
+ *
+ *   Ping a list of target hosts in a round robin fashion.
+ *   A better ping overall.
+ *
+ * fping website:  http://www.fping.org
+ *
+ * Current maintainer of fping: David Schweikert
+ * Please send suggestions and patches to: david@schweikert.ch
+ *
+ *
+ * Original author:  Roland Schemers  <schemers@stanford.edu>
+ * IPv6 Support:     Jeroen Massar    <jeroen@unfix.org / jeroen@ipng.nl>
+ * Improved main loop: David Schweikert <david@schweikert.ch>
+ * Debian Merge, TOS settings: Tobi Oetiker <tobi@oetiker.ch>
+ * Bugfixes, byte order & senseful seq.-numbers: Stephan Fuhrmann (stephan.fuhrmann AT 1und1.de)
+ *
+ *
+ * Redistribution and use in source and binary forms are permitted
+ * provided that the above copyright notice and this paragraph are
+ * duplicated in all such forms and that any documentation,
+ * advertising materials, and other materials related to such
+ * distribution and use acknowledge that the software was developed
+ * by Stanford University.  The name of the University may not be used 
+ * to endorse or promote products derived from this software without 
+ * specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#include "fping.h"
+#include "config.h"
+
+#include <sys/socket.h>
+#include <netinet/in.h>
+#include <netdb.h>
+#include <stdio.h>
+#include <string.h>
+
+int open_ping_socket_ipv4()
+{
+    struct protoent *proto;
+    int s;
+
+    /* confirm that ICMP is available on this machine */
+    if( ( proto = getprotobyname( "icmp" ) ) == NULL ) 
+        crash_and_burn( "icmp: unknown protocol" );
+
+    /* create raw socket for ICMP calls (ping) */
+    s = socket( AF_INET, SOCK_RAW, proto->p_proto );
+    if( s < 0 ) {
+        /* try non-privileged icmp (works on Mac OSX without privileges, for example) */
+        s = socket( AF_INET, SOCK_DGRAM, proto->p_proto );
+        if( s < 0 ) {
+            errno_crash_and_burn( "can't create socket (must run as root?)" );
+        }
+    }
+
+    return s;
+}
+
+void socket_set_src_addr_ipv4(int s, FPING_INADDR src_addr)
+{
+    struct sockaddr_in sa;
+    memset( &sa, 0, sizeof( sa ) );
+    sa.sin_family = AF_INET;
+    sa.sin_addr = src_addr;
+
+    if ( bind( s, (struct sockaddr *)&sa, sizeof( sa ) ) < 0 )
+        errno_crash_and_burn( "cannot bind source address" );
+}

src/socket6.c

@@ -0,0 +1,76 @@
+/* 
+ * fping: fast-ping, file-ping, favorite-ping, funky-ping
+ *
+ *   Ping a list of target hosts in a round robin fashion.
+ *   A better ping overall.
+ *
+ * fping website:  http://www.fping.org
+ *
+ * Current maintainer of fping: David Schweikert
+ * Please send suggestions and patches to: david@schweikert.ch
+ *
+ *
+ * Original author:  Roland Schemers  <schemers@stanford.edu>
+ * IPv6 Support:     Jeroen Massar    <jeroen@unfix.org / jeroen@ipng.nl>
+ * Improved main loop: David Schweikert <david@schweikert.ch>
+ * Debian Merge, TOS settings: Tobi Oetiker <tobi@oetiker.ch>
+ * Bugfixes, byte order & senseful seq.-numbers: Stephan Fuhrmann (stephan.fuhrmann AT 1und1.de)
+ *
+ *
+ * Redistribution and use in source and binary forms are permitted
+ * provided that the above copyright notice and this paragraph are
+ * duplicated in all such forms and that any documentation,
+ * advertising materials, and other materials related to such
+ * distribution and use acknowledge that the software was developed
+ * by Stanford University.  The name of the University may not be used 
+ * to endorse or promote products derived from this software without 
+ * specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#include "fping.h"
+#include "config.h"
+
+#include <sys/socket.h>
+#include <netinet/in.h>
+#include <netdb.h>
+#include <stdio.h>
+#include <string.h>
+
+#include <netinet/icmp6.h>
+
+int open_ping_socket_ipv6()
+{
+    struct protoent *proto;
+    int opton = 1;
+    int s;
+
+    /* confirm that ICMP is available on this machine */
+    if( ( proto = getprotobyname( "ipv6-icmp" ) ) == NULL ) 
+        crash_and_burn( "icmp: unknown protocol" );
+
+    /* create raw socket for ICMP calls (ping) */
+    s = socket( AF_INET6, SOCK_RAW, proto->p_proto );
+    if( s < 0 ) {
+        /* try non-privileged icmp (works on Mac OSX without privileges, for example) */
+        s = socket( AF_INET6, SOCK_DGRAM, proto->p_proto );
+        if( s < 0 ) {
+            errno_crash_and_burn( "can't create raw socket (must run as root?)" );
+        }
+    }
+
+    return s;
+}
+
+void socket_set_src_addr_ipv6(int s, FPING_INADDR src_addr)
+{
+    struct sockaddr_in6 sa;
+    memset( &sa, 0, sizeof( sa ) );
+    sa.sin6_family = AF_INET6;
+    sa.sin6_addr = src_addr;
+
+    if ( bind( s, (struct sockaddr *)&sa, sizeof( sa ) ) < 0 )
+        errno_crash_and_burn( "cannot bind source address" );
+}

src/test-c89.sh

@@ -0,0 +1 @@
+gcc -DHAVE_CONFIG_H -D_BSD_SOURCE -D_POSIX_SOURCE -I.. -Wall -std=c89 -pedantic -c -o fping.o fping.c

stamp-h.in

@@ -1 +0,0 @@
-timestamp