Release 3.1

Typo and man-page fixups

ChangeLog

@@ -1,4 +1,20 @@
-Thu Dec 15 2011
+UNRELEASED
+David Schweikert <david@schweikert.ch>
+- Revision v3.1
+  * -g option (generate): exclude network and broadcast address for cidr
+    ranges (idea by Eric Brander)
+  * do not explicitely check if running as root, to make it possible to
+    install fping with linux capabilities instead of making it setuid
+    (setcap cap_net_raw+ep fping)
+  * ANSI C (C89) compiler now a requirement
+  * Portability fixes
+  * Reorganized source directory
+  * Bugfix: fix timeout issue on Solaris (Sandor Geller)
+  * Man-page fixes (Axel Beckert)
+  * Added -H option to specify number of hops (Paul Duda)
+  * Output usage information to stdout when called with -h (Paul Duda)
+
+Thu Dec 28 2011
 David Schweikert <david@schweikert.ch>
 - Revision v3.0
   * rewritten main loop for improved performance
@@ -17,6 +33,14 @@ Tobi Oetiker <tobi@oetiker.ch>
   
 ----------------------------------------------------------------------
 
+fping (2.4b2-to-ipv6-16.1) unstable; urgency=low
+
+  * NMU during Moenchengladbach BSP
+  * Fixes FTBFS on kfreebsd (Closes: #555398)
+  * Fixes typo "Paramter" in binary
+
+ -- Axel Beckert <abe@deuxchevaux.org>  Sat, 23 Jan 2010 16:22:02 +0100 
+
 fping (2.4b2-to-ipv6-16) unstable; urgency=low
 
   * Fix the following bugs

INSTALL

@@ -3,6 +3,8 @@ Basic Installation
 
    These are generic installation instructions.
 
+   --> See the README file for fping-specific instructions. <--
+
    The `configure' shell script attempts to guess correct values for
 various system-dependent variables used during compilation.  It uses
 those values to create a `Makefile' in each directory of the package.
@@ -173,13 +175,3 @@ operates.
      script, and exit.
 
 `configure' also accepts some other, not widely useful, options.
-
-
-Problems and Notes
-==================
-
-Apr 2001
-- Making fping requires 'm4' and 'autoheader'
-- fping is known not to build on Solaris. (Solaris lacks 'autoheader')
-- fping has been reported to bug out if a file contains more than 3600 addresses to scan.
-- If you are having problems compiling, try an earlier version (2.2b2 for example)

Makefile.am

@@ -1,5 +1 @@
-sbin_PROGRAMS = fping
-fping_SOURCES = fping.c options.h
-man_MANS = fping.8
-AUTOMAKE_OPTIONS=foreign
-EXTRA_DIST = $(man_MANS) autogen.sh
+SUBDIRS = doc src

Makefile.in

@@ -14,7 +14,6 @@
 # PARTICULAR PURPOSE.
 
 @SET_MAKE@
-
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
@@ -35,13 +34,11 @@ POST_UNINSTALL = :
 build_triplet = @build@
 host_triplet = @host@
 target_triplet = @target@
-sbin_PROGRAMS = fping$(EXEEXT)
 subdir = .
 DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
 	$(srcdir)/Makefile.in $(srcdir)/config.h.in \
-	$(top_srcdir)/configure COPYING ChangeLog INSTALL acconfig.h \
-	config.guess config.sub depcomp install-sh missing \
-	mkinstalldirs
+	$(top_srcdir)/configure COPYING ChangeLog INSTALL config.guess \
+	config.sub depcomp install-sh missing mkinstalldirs
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/configure.in
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
@@ -52,47 +49,23 @@ mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
 CONFIG_HEADER = config.h
 CONFIG_CLEAN_FILES =
 CONFIG_CLEAN_VPATH_FILES =
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-PROGRAMS = $(sbin_PROGRAMS)
-am_fping_OBJECTS = fping.$(OBJEXT)
-fping_OBJECTS = $(am_fping_OBJECTS)
-fping_LDADD = $(LDADD)
-DEFAULT_INCLUDES = -I.@am__isrc@
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
-	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-SOURCES = $(fping_SOURCES)
-DIST_SOURCES = $(fping_SOURCES)
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+	html-recursive info-recursive install-data-recursive \
+	install-dvi-recursive install-exec-recursive \
+	install-html-recursive install-info-recursive \
+	install-pdf-recursive install-ps-recursive install-recursive \
+	installcheck-recursive installdirs-recursive pdf-recursive \
+	ps-recursive uninstall-recursive
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
+  distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+	distdir dist dist-all distcheck
 ETAGS = etags
 CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 distdir = $(PACKAGE)-$(VERSION)
 top_distdir = $(distdir)
@@ -100,6 +73,31 @@ am__remove_distdir = \
   { test ! -d "$(distdir)" \
     || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
          && rm -fr "$(distdir)"; }; }
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
 DIST_ARCHIVES = $(distdir).tar.gz
 GZIP_ENV = --best
 distuninstallcheck_listfiles = find . -type f -print
@@ -203,15 +201,11 @@ target_vendor = @target_vendor@
 top_build_prefix = @top_build_prefix@
 top_builddir = @top_builddir@
 top_srcdir = @top_srcdir@
-fping_SOURCES = fping.c options.h
-man_MANS = fping.8
-AUTOMAKE_OPTIONS = foreign
-EXTRA_DIST = $(man_MANS) autogen.sh
+SUBDIRS = doc src
 all: config.h
-	$(MAKE) $(AM_MAKEFLAGS) all-am
+	$(MAKE) $(AM_MAKEFLAGS) all-recursive
 
 .SUFFIXES:
-.SUFFIXES: .c .o .obj
 am--refresh:
 	@:
 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
@@ -256,113 +250,83 @@ config.h: stamp-h1
 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
 	@rm -f stamp-h1
 	cd $(top_builddir) && $(SHELL) ./config.status config.h
-$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) $(top_srcdir)/acconfig.h
+$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 
 	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
 	rm -f stamp-h1
 	touch $@
 
 distclean-hdr:
 	-rm -f config.h stamp-h1
-install-sbinPROGRAMS: $(sbin_PROGRAMS)
-	@$(NORMAL_INSTALL)
-	test -z "$(sbindir)" || $(MKDIR_P) "$(DESTDIR)$(sbindir)"
-	@list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
-	for p in $$list; do echo "$$p $$p"; done | \
-	sed 's/$(EXEEXT)$$//' | \
-	while read p p1; do if test -f $$p; \
-	  then echo "$$p"; echo "$$p"; else :; fi; \
-	done | \
-	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
-	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
-	sed 'N;N;N;s,\n, ,g' | \
-	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
-	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
-	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
-	    else { print "f", $$3 "/" $$4, $$1; } } \
-	  END { for (d in files) print "f", d, files[d] }' | \
-	while read type dir files; do \
-	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
-	    test -z "$$files" || { \
-	      echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
-	      $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
-	    } \
-	; done
 
-uninstall-sbinPROGRAMS:
-	@$(NORMAL_UNINSTALL)
-	@list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
-	files=`for p in $$list; do echo "$$p"; done | \
-	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
-	      -e 's/$$/$(EXEEXT)/' `; \
-	test -n "$$list" || exit 0; \
-	echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \
-	cd "$(DESTDIR)$(sbindir)" && rm -f $$files
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+#     (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+	@fail= failcom='exit 1'; \
+	for f in x $$MAKEFLAGS; do \
+	  case $$f in \
+	    *=* | --[!k]*);; \
+	    *k*) failcom='fail=yes';; \
+	  esac; \
+	done; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
 
-clean-sbinPROGRAMS:
-	-test -z "$(sbin_PROGRAMS)" || rm -f $(sbin_PROGRAMS)
-fping$(EXEEXT): $(fping_OBJECTS) $(fping_DEPENDENCIES) 
-	@rm -f fping$(EXEEXT)
-	$(LINK) $(fping_OBJECTS) $(fping_LDADD) $(LIBS)
-
-mostlyclean-compile:
-	-rm -f *.$(OBJEXT)
-
-distclean-compile:
-	-rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fping.Po@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
-install-man8: $(man_MANS)
-	@$(NORMAL_INSTALL)
-	test -z "$(man8dir)" || $(MKDIR_P) "$(DESTDIR)$(man8dir)"
-	@list=''; test -n "$(man8dir)" || exit 0; \
-	{ for i in $$list; do echo "$$i"; done; \
-	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
-	  sed -n '/\.8[a-z]*$$/p'; \
-	} | while read p; do \
-	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; echo "$$p"; \
-	done | \
-	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
-	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
-	sed 'N;N;s,\n, ,g' | { \
-	list=; while read file base inst; do \
-	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
-	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
-	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
+$(RECURSIVE_CLEAN_TARGETS):
+	@fail= failcom='exit 1'; \
+	for f in x $$MAKEFLAGS; do \
+	  case $$f in \
+	    *=* | --[!k]*);; \
+	    *k*) failcom='fail=yes';; \
+	  esac; \
+	done; \
+	dot_seen=no; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	rev=''; for subdir in $$list; do \
+	  if test "$$subdir" = "."; then :; else \
+	    rev="$$subdir $$rev"; \
 	  fi; \
 	done; \
-	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
-	while read files; do \
-	  test -z "$$files" || { \
-	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
-	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
-	done; }
-
-uninstall-man8:
-	@$(NORMAL_UNINSTALL)
-	@list=''; test -n "$(man8dir)" || exit 0; \
-	files=`{ for i in $$list; do echo "$$i"; done; \
-	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
-	  sed -n '/\.8[a-z]*$$/p'; \
-	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
-	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
-	test -z "$$files" || { \
-	  echo " ( cd '$(DESTDIR)$(man8dir)' && rm -f" $$files ")"; \
-	  cd "$(DESTDIR)$(man8dir)" && rm -f $$files; }
+	rev="$$rev ."; \
+	target=`echo $@ | sed s/-recursive//`; \
+	for subdir in $$rev; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done && test -z "$$fail"
+tags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	done
+ctags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	done
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -374,10 +338,23 @@ ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	mkid -fID $$unique
 tags: TAGS
 
-TAGS:  $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
+TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
 	set x; \
 	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
 	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
@@ -396,7 +373,7 @@ TAGS:  $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
 	  fi; \
 	fi
 ctags: CTAGS
-CTAGS:  $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
 	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -417,19 +394,6 @@ distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 
 distdir: $(DISTFILES)
-	@list='$(MANS)'; if test -n "$$list"; then \
-	  list=`for p in $$list; do \
-	    if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
-	    if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
-	  if test -n "$$list" && \
-	    grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
-	    echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
-	    grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/         /' >&2; \
-	    echo "       to fix them, install help2man, remove and regenerate the man pages;" >&2; \
-	    echo "       typically \`make maintainer-clean' will remove them" >&2; \
-	    exit 1; \
-	  else :; fi; \
-	else :; fi
 	$(am__remove_distdir)
 	test -d "$(distdir)" || mkdir "$(distdir)"
 	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
@@ -461,6 +425,34 @@ distdir: $(DISTFILES)
 	    || exit 1; \
 	  fi; \
 	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test -d "$(distdir)/$$subdir" \
+	    || $(MKDIR_P) "$(distdir)/$$subdir" \
+	    || exit 1; \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
+		am__remove_distdir=: \
+		am__skip_length_check=: \
+		am__skip_mode_fix=: \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
 	-test -n "$(am__skip_mode_fix)" \
 	|| find "$(distdir)" -type d ! -perm -755 \
 		-exec chmod u+rwx,go+rx {} \; -o \
@@ -577,21 +569,19 @@ distcleancheck: distclean
 	       $(distcleancheck_listfiles) ; \
 	       exit 1; } >&2
 check-am: all-am
-check: check-am
-all-am: Makefile $(PROGRAMS) $(MANS) config.h
-installdirs:
-	for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
+check: check-recursive
+all-am: Makefile config.h
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
 
 install-am: all-am
 	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 
-installcheck: installcheck-am
+installcheck: installcheck-recursive
 install-strip:
 	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
@@ -608,98 +598,92 @@ distclean-generic:
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
 	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
+clean: clean-recursive
 
-clean-am: clean-generic clean-sbinPROGRAMS mostlyclean-am
+clean-am: clean-generic mostlyclean-am
 
-distclean: distclean-am
+distclean: distclean-recursive
 	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	-rm -rf ./$(DEPDIR)
 	-rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-hdr distclean-tags
+distclean-am: clean-am distclean-generic distclean-hdr distclean-tags
 
-dvi: dvi-am
+dvi: dvi-recursive
 
 dvi-am:
 
-html: html-am
+html: html-recursive
 
 html-am:
 
-info: info-am
+info: info-recursive
 
 info-am:
 
-install-data-am: install-man
+install-data-am:
 
-install-dvi: install-dvi-am
+install-dvi: install-dvi-recursive
 
 install-dvi-am:
 
-install-exec-am: install-sbinPROGRAMS
+install-exec-am:
 
-install-html: install-html-am
+install-html: install-html-recursive
 
 install-html-am:
 
-install-info: install-info-am
+install-info: install-info-recursive
 
 install-info-am:
 
-install-man: install-man8
+install-man:
 
-install-pdf: install-pdf-am
+install-pdf: install-pdf-recursive
 
 install-pdf-am:
 
-install-ps: install-ps-am
+install-ps: install-ps-recursive
 
 install-ps-am:
 
 installcheck-am:
 
-maintainer-clean: maintainer-clean-am
+maintainer-clean: maintainer-clean-recursive
 	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
 	-rm -rf $(top_srcdir)/autom4te.cache
-	-rm -rf ./$(DEPDIR)
 	-rm -f Makefile
 maintainer-clean-am: distclean-am maintainer-clean-generic
 
-mostlyclean: mostlyclean-am
+mostlyclean: mostlyclean-recursive
 
-mostlyclean-am: mostlyclean-compile mostlyclean-generic
+mostlyclean-am: mostlyclean-generic
 
-pdf: pdf-am
+pdf: pdf-recursive
 
 pdf-am:
 
-ps: ps-am
+ps: ps-recursive
 
 ps-am:
 
-uninstall-am: uninstall-man uninstall-sbinPROGRAMS
+uninstall-am:
 
-uninstall-man: uninstall-man8
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \
+	ctags-recursive install-am install-strip tags-recursive
 
-.MAKE: all install-am install-strip
-
-.PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
-	clean-generic clean-sbinPROGRAMS ctags dist dist-all \
-	dist-bzip2 dist-gzip dist-lzma dist-shar dist-tarZ dist-xz \
-	dist-zip distcheck distclean distclean-compile \
-	distclean-generic distclean-hdr distclean-tags distcleancheck \
-	distdir distuninstallcheck dvi dvi-am html html-am info \
-	info-am install install-am install-data install-data-am \
-	install-dvi install-dvi-am install-exec install-exec-am \
-	install-html install-html-am install-info install-info-am \
-	install-man install-man8 install-pdf install-pdf-am install-ps \
-	install-ps-am install-sbinPROGRAMS install-strip installcheck \
-	installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-compile \
-	mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \
-	uninstall-am uninstall-man uninstall-man8 \
-	uninstall-sbinPROGRAMS
+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+	all all-am am--refresh check check-am clean clean-generic \
+	ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \
+	dist-lzma dist-shar dist-tarZ dist-xz dist-zip distcheck \
+	distclean distclean-generic distclean-hdr distclean-tags \
+	distcleancheck distdir distuninstallcheck dvi dvi-am html \
+	html-am info info-am install install-am install-data \
+	install-data-am install-dvi install-dvi-am install-exec \
+	install-exec-am install-html install-html-am install-info \
+	install-info-am install-man install-pdf install-pdf-am \
+	install-ps install-ps-am install-strip installcheck \
+	installcheck-am installdirs installdirs-am maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
+	pdf-am ps ps-am tags tags-recursive uninstall uninstall-am
 
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.

README

@@ -1,64 +1,35 @@
-fping README
-------------
+fping 3 README
+--------------
+fping is a program to send ICMP echo probes to network hosts, similar to ping,
+but much better performing when pinging multiple hosts. fping has a long long
+story: Roland Schemers did publish a first version of it in 1992 and it has
+established itself since then as a standard tool.
 
 Current maintainer:
+   David Schweikert <david@schweikert.ch>
 
-David Schweikert <david@schweikert.ch>
+Website:
+   http://www.fping.org
 
+Installation
+------------
+If you want to install fping from source, proceed as follows:
 
-fping website:  http://www.fping.org
+1. Run ./configure with the correct arguments
+   (see: ./configure --help)
 
+2. Run make; make install
 
+3. Make fping either setuid, or, if under Linux:
+
+   sudo setcap cap_net_raw+ep fping
+
+4. Have a look at the fping(1) manual for usage help
+   (fping -h will also give a minimal help output)
+
+Credits
+-------
 Original author:  Roland Schemers (schemers@stanford.edu)
 Previous maintainer:  RL "Bob" Morgan (morgan@stanford.edu)
 IPv6 Support: Jeroen Massar (jeroen@unfix.org / jeroen@ipng.nl)
               to enable IPV6 compile with -DIPV6                          
-
-Suggestions and patches:
-
-....
-
-------------------------------------------------------------------------------
-
-Original README from 1992! 5 years ago? Time flies...
-
-        fping - A tool to quickly ping N number of hosts to determine
-        their reachability.
-
-             Roland J. Schemers III - Stanford University
-                   schemers@Stanford.EDU
-
-      fping is a ping(1) like program which uses the Internet Control
-      Message Protocol (ICMP) echo request to determine if a host is
-      up. fping is different from ping in that you can specify any
-      number of hosts on the command line, or specify a file containing
-      the lists of hosts to ping. Instead of trying one host until it
-      timeouts or replies, fping will send out a ping packet and move
-      on to the next host in a round-robin fashion. If a host replies,
-      it is noted and removed from the list of hosts to check. If a host
-      does not respond within a certain time limit and/or retry limit it 
-      will be considered unreachable. 
-
-Site
-      Stanford University has a large TCP/IP network with over 16,000 
-      assigned IP addresses and over 100 IP subnets.
-
-Problem and Issues
-
-      With a large a number of IP addresses in use, its becomes more and
-      more time consuming to check on which IP addresses are actively
-      in use, and which critical machines (routers, bridges, servers, etc)
-      are reachable. One example is we have a program which goes through
-      all of our routers arp caches looking for IP addresses that are in 
-      use. After finding a list of IP addresses that aren't in any arp
-      caches fping can then be used to see if these IP addresses really
-      aren't being used, or are just behind the routers. Checking 2500
-      hosts (99% of which are unreachable) via ping can take hours.
-       
-      fping was written to solve the problem of pinging N number of hosts
-      in an efficient manner. By sending out pings in a round-robin fashion
-      and checking on responses as they come in at random, a large number of 
-      hosts can be checked at once.
-
-      Unlike ping, fping is meant to be used in scripts and its
-      output is easy to parse.

acconfig.h

@@ -1,18 +0,0 @@
-#ifndef CONFIG_H
-#define CONFIG_H
-
-@TOP@
-
-/* VERSION (from configure.in) */
-#undef VERSION
-
-
-@BOTTOM@
-
-/* some OSes do not define this ... lets take a wild guess */
-
-#ifndef INADDR_NONE
-#  define INADDR_NONE 0xffffffffU
-#endif
-
-#endif /* CONFIG_H */

aclocal.m4

@@ -13,8 +13,8 @@
 
 m4_ifndef([AC_AUTOCONF_VERSION],
   [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.68],,
-[m4_warning([this file was generated for autoconf 2.68.
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.67],,
+[m4_warning([this file was generated for autoconf 2.67.
 You have another version of autoconf.  It may work, but is not guaranteed to.
 If you have problems, you may need to regenerate the build system entirely.
 To do so, use the procedure documented by the package, typically `autoreconf'.])])

autogen.sh

@@ -1,4 +0,0 @@
-#!/bin/sh
-PATH="/usr/pack/automake-1.11-to/amd64-linux-debian3.1/:/usr/pack/automake-1.11-to/amd64-linux-ubuntu8.04/bin:$PATH"
-export PATH
-autoreconf --force --install --verbose

config.h.in

@@ -59,6 +59,9 @@
 /* Define to the one symbol short name of this package. */
 #undef PACKAGE_TARNAME
 
+/* Define to the home page for this package. */
+#undef PACKAGE_URL
+
 /* Define to the version of this package. */
 #undef PACKAGE_VERSION
 

configure

@@ -1,6 +1,6 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.68 for fping 3.0-rc2.
+# Generated by GNU Autoconf 2.67 for fping 3.1.
 #
 #
 # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
@@ -89,7 +89,6 @@ fi
 IFS=" ""	$as_nl"
 
 # Find who we are.  Look in the path if we contain no directory separator.
-as_myself=
 case $0 in #((
   *[\\/]* ) as_myself=$0 ;;
   *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
@@ -215,18 +214,11 @@ IFS=$as_save_IFS
   # We cannot yet assume a decent shell, so we have to provide a
 	# neutralization value for shells without unset; and this also
 	# works around shells that cannot unset nonexistent variables.
-	# Preserve -v and -x to the replacement shell.
 	BASH_ENV=/dev/null
 	ENV=/dev/null
 	(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
 	export CONFIG_SHELL
-	case $- in # ((((
-	  *v*x* | *x*v* ) as_opts=-vx ;;
-	  *v* ) as_opts=-v ;;
-	  *x* ) as_opts=-x ;;
-	  * ) as_opts= ;;
-	esac
-	exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"}
+	exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
 fi
 
     if test x$as_have_required = xno; then :
@@ -557,8 +549,8 @@ MAKEFLAGS=
 # Identity of this package.
 PACKAGE_NAME='fping'
 PACKAGE_TARNAME='fping'
-PACKAGE_VERSION='3.0-rc2'
-PACKAGE_STRING='fping 3.0-rc2'
+PACKAGE_VERSION='3.1'
+PACKAGE_STRING='fping 3.1'
 PACKAGE_BUGREPORT=''
 PACKAGE_URL=''
 
@@ -1116,7 +1108,7 @@ Try \`$0 --help' for more information"
     $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
     expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
       $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
-    : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
+    : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
     ;;
 
   esac
@@ -1254,7 +1246,7 @@ if test "$ac_init_help" = "long"; then
   # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF
-\`configure' configures fping 3.0-rc2 to adapt to many kinds of systems.
+\`configure' configures fping 3.1 to adapt to many kinds of systems.
 
 Usage: $0 [OPTION]... [VAR=VALUE]...
 
@@ -1325,7 +1317,7 @@ fi
 
 if test -n "$ac_init_help"; then
   case $ac_init_help in
-     short | recursive ) echo "Configuration of fping 3.0-rc2:";;
+     short | recursive ) echo "Configuration of fping 3.1:";;
    esac
   cat <<\_ACEOF
 
@@ -1414,8 +1406,8 @@ fi
 test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
-fping configure 3.0-rc2
-generated by GNU Autoconf 2.68
+fping configure 3.1
+generated by GNU Autoconf 2.67
 
 Copyright (C) 2010 Free Software Foundation, Inc.
 This configure script is free software; the Free Software Foundation
@@ -1461,7 +1453,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
 
 	ac_retval=1
 fi
-  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
   as_fn_set_status $ac_retval
 
 } # ac_fn_c_try_compile
@@ -1498,7 +1490,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
 
     ac_retval=1
 fi
-  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
   as_fn_set_status $ac_retval
 
 } # ac_fn_c_try_cpp
@@ -1544,7 +1536,7 @@ fi
   # interfere with the next link command; also delete a directory that is
   # left behind by Apple's compiler.  We do this before executing the actions.
   rm -rf conftest.dSYM conftest_ipa8_conftest.oo
-  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
   as_fn_set_status $ac_retval
 
 } # ac_fn_c_try_link
@@ -1557,7 +1549,7 @@ ac_fn_c_check_func ()
   as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
 $as_echo_n "checking for $2... " >&6; }
-if eval \${$3+:} false; then :
+if eval "test \"\${$3+set}\"" = set; then :
   $as_echo_n "(cached) " >&6
 else
   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -1612,7 +1604,7 @@ fi
 eval ac_res=\$$3
 	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
 $as_echo "$ac_res" >&6; }
-  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
 
 } # ac_fn_c_check_func
 
@@ -1624,10 +1616,10 @@ $as_echo "$ac_res" >&6; }
 ac_fn_c_check_header_mongrel ()
 {
   as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-  if eval \${$3+:} false; then :
+  if eval "test \"\${$3+set}\"" = set; then :
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
 $as_echo_n "checking for $2... " >&6; }
-if eval \${$3+:} false; then :
+if eval "test \"\${$3+set}\"" = set; then :
   $as_echo_n "(cached) " >&6
 fi
 eval ac_res=\$$3
@@ -1690,7 +1682,7 @@ $as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
 esac
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
 $as_echo_n "checking for $2... " >&6; }
-if eval \${$3+:} false; then :
+if eval "test \"\${$3+set}\"" = set; then :
   $as_echo_n "(cached) " >&6
 else
   eval "$3=\$ac_header_compiler"
@@ -1699,7 +1691,7 @@ eval ac_res=\$$3
 	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
 $as_echo "$ac_res" >&6; }
 fi
-  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
 
 } # ac_fn_c_check_header_mongrel
 
@@ -1740,7 +1732,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
        ac_retval=$ac_status
 fi
   rm -rf conftest.dSYM conftest_ipa8_conftest.oo
-  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
   as_fn_set_status $ac_retval
 
 } # ac_fn_c_try_run
@@ -1754,7 +1746,7 @@ ac_fn_c_check_header_compile ()
   as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
 $as_echo_n "checking for $2... " >&6; }
-if eval \${$3+:} false; then :
+if eval "test \"\${$3+set}\"" = set; then :
   $as_echo_n "(cached) " >&6
 else
   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -1772,15 +1764,15 @@ fi
 eval ac_res=\$$3
 	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
 $as_echo "$ac_res" >&6; }
-  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
 
 } # ac_fn_c_check_header_compile
 cat >config.log <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 
-It was created by fping $as_me 3.0-rc2, which was
-generated by GNU Autoconf 2.68.  Invocation command line was
+It was created by fping $as_me 3.1, which was
+generated by GNU Autoconf 2.67.  Invocation command line was
 
   $ $0 $@
 
@@ -2038,7 +2030,7 @@ $as_echo "$as_me: loading site script $ac_site_file" >&6;}
       || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "failed to load site script $ac_site_file
-See \`config.log' for more details" "$LINENO" 5; }
+See \`config.log' for more details" "$LINENO" 5 ; }
   fi
 done
 
@@ -2163,7 +2155,7 @@ $SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
 $as_echo_n "checking build system type... " >&6; }
-if ${ac_cv_build+:} false; then :
+if test "${ac_cv_build+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_build_alias=$build_alias
@@ -2179,7 +2171,7 @@ fi
 $as_echo "$ac_cv_build" >&6; }
 case $ac_cv_build in
 *-*-*) ;;
-*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
+*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5 ;;
 esac
 build=$ac_cv_build
 ac_save_IFS=$IFS; IFS='-'
@@ -2197,7 +2189,7 @@ case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
 $as_echo_n "checking host system type... " >&6; }
-if ${ac_cv_host+:} false; then :
+if test "${ac_cv_host+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test "x$host_alias" = x; then
@@ -2212,7 +2204,7 @@ fi
 $as_echo "$ac_cv_host" >&6; }
 case $ac_cv_host in
 *-*-*) ;;
-*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
+*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5 ;;
 esac
 host=$ac_cv_host
 ac_save_IFS=$IFS; IFS='-'
@@ -2230,7 +2222,7 @@ case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking target system type" >&5
 $as_echo_n "checking target system type... " >&6; }
-if ${ac_cv_target+:} false; then :
+if test "${ac_cv_target+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test "x$target_alias" = x; then
@@ -2245,7 +2237,7 @@ fi
 $as_echo "$ac_cv_target" >&6; }
 case $ac_cv_target in
 *-*-*) ;;
-*) as_fn_error $? "invalid value of canonical target" "$LINENO" 5;;
+*) as_fn_error $? "invalid value of canonical target" "$LINENO" 5 ;;
 esac
 target=$ac_cv_target
 ac_save_IFS=$IFS; IFS='-'
@@ -2286,7 +2278,7 @@ am__api_version='1.11'
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
 $as_echo_n "checking for a BSD-compatible install... " >&6; }
 if test -z "$INSTALL"; then
-if ${ac_cv_path_install+:} false; then :
+if test "${ac_cv_path_install+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
@@ -2373,11 +2365,11 @@ am_lf='
 '
 case `pwd` in
   *[\\\"\#\$\&\'\`$am_lf]*)
-    as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
+    as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5 ;;
 esac
 case $srcdir in
   *[\\\"\#\$\&\'\`$am_lf\ \	]*)
-    as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;
+    as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5 ;;
 esac
 
 # Do `set' in a subshell so we don't clobber the current shell's
@@ -2463,7 +2455,7 @@ if test "$cross_compiling" != no; then
 set dummy ${ac_tool_prefix}strip; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_STRIP+:} false; then :
+if test "${ac_cv_prog_STRIP+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$STRIP"; then
@@ -2503,7 +2495,7 @@ if test -z "$ac_cv_prog_STRIP"; then
 set dummy strip; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_STRIP"; then
@@ -2556,7 +2548,7 @@ INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
 $as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
 if test -z "$MKDIR_P"; then
-  if ${ac_cv_path_mkdir+:} false; then :
+  if test "${ac_cv_path_mkdir+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
@@ -2607,7 +2599,7 @@ do
 set dummy $ac_prog; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_AWK+:} false; then :
+if test "${ac_cv_prog_AWK+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$AWK"; then
@@ -2647,7 +2639,7 @@ done
 $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
 set x ${MAKE-make}
 ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
-if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
+if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\"" = set; then :
   $as_echo_n "(cached) " >&6
 else
   cat >conftest.make <<\_ACEOF
@@ -2705,7 +2697,7 @@ fi
 
 # Define the identity of the package.
  PACKAGE='fping'
- VERSION='3.0-rc2'
+ VERSION='3.1'
 
 
 cat >>confdefs.h <<_ACEOF
@@ -2783,7 +2775,7 @@ if test -n "$ac_tool_prefix"; then
 set dummy ${ac_tool_prefix}gcc; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
+if test "${ac_cv_prog_CC+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$CC"; then
@@ -2823,7 +2815,7 @@ if test -z "$ac_cv_prog_CC"; then
 set dummy gcc; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_CC+:} false; then :
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_CC"; then
@@ -2876,7 +2868,7 @@ if test -z "$CC"; then
 set dummy ${ac_tool_prefix}cc; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
+if test "${ac_cv_prog_CC+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$CC"; then
@@ -2916,7 +2908,7 @@ if test -z "$CC"; then
 set dummy cc; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
+if test "${ac_cv_prog_CC+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$CC"; then
@@ -2975,7 +2967,7 @@ if test -z "$CC"; then
 set dummy $ac_tool_prefix$ac_prog; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
+if test "${ac_cv_prog_CC+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$CC"; then
@@ -3019,7 +3011,7 @@ do
 set dummy $ac_prog; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_CC+:} false; then :
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_CC"; then
@@ -3074,7 +3066,7 @@ fi
 test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "no acceptable C compiler found in \$PATH
-See \`config.log' for more details" "$LINENO" 5; }
+See \`config.log' for more details" "$LINENO" 5 ; }
 
 # Provide some information about the compiler.
 $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
@@ -3189,7 +3181,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error 77 "C compiler cannot create executables
-See \`config.log' for more details" "$LINENO" 5; }
+See \`config.log' for more details" "$LINENO" 5 ; }
 else
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
@@ -3232,7 +3224,7 @@ else
   { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details" "$LINENO" 5; }
+See \`config.log' for more details" "$LINENO" 5 ; }
 fi
 rm -f conftest conftest$ac_cv_exeext
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
@@ -3291,7 +3283,7 @@ $as_echo "$ac_try_echo"; } >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "cannot run C compiled programs.
 If you meant to cross compile, use \`--host'.
-See \`config.log' for more details" "$LINENO" 5; }
+See \`config.log' for more details" "$LINENO" 5 ; }
     fi
   fi
 fi
@@ -3302,7 +3294,7 @@ rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
 ac_clean_files=$ac_clean_files_save
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
 $as_echo_n "checking for suffix of object files... " >&6; }
-if ${ac_cv_objext+:} false; then :
+if test "${ac_cv_objext+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -3343,7 +3335,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "cannot compute suffix of object files: cannot compile
-See \`config.log' for more details" "$LINENO" 5; }
+See \`config.log' for more details" "$LINENO" 5 ; }
 fi
 rm -f conftest.$ac_cv_objext conftest.$ac_ext
 fi
@@ -3353,7 +3345,7 @@ OBJEXT=$ac_cv_objext
 ac_objext=$OBJEXT
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
 $as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
-if ${ac_cv_c_compiler_gnu+:} false; then :
+if test "${ac_cv_c_compiler_gnu+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -3390,7 +3382,7 @@ ac_test_CFLAGS=${CFLAGS+set}
 ac_save_CFLAGS=$CFLAGS
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
 $as_echo_n "checking whether $CC accepts -g... " >&6; }
-if ${ac_cv_prog_cc_g+:} false; then :
+if test "${ac_cv_prog_cc_g+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_save_c_werror_flag=$ac_c_werror_flag
@@ -3468,7 +3460,7 @@ else
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
 $as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
-if ${ac_cv_prog_cc_c89+:} false; then :
+if test "${ac_cv_prog_cc_c89+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_cv_prog_cc_c89=no
@@ -3629,7 +3621,7 @@ depcc="$CC"   am_compiler_list=
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
 $as_echo_n "checking dependency style of $depcc... " >&6; }
-if ${am_cv_CC_dependencies_compiler_type+:} false; then :
+if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
@@ -3764,7 +3756,7 @@ if test -n "$CPP" && test -d "$CPP"; then
   CPP=
 fi
 if test -z "$CPP"; then
-  if ${ac_cv_prog_CPP+:} false; then :
+  if test "${ac_cv_prog_CPP+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
       # Double quotes because CPP needs to be expanded
@@ -3880,7 +3872,7 @@ else
   { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details" "$LINENO" 5; }
+See \`config.log' for more details" "$LINENO" 5 ; }
 fi
 
 ac_ext=c
@@ -3894,14 +3886,14 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 
 ac_fn_c_check_func "$LINENO" "gethostbyname" "ac_cv_func_gethostbyname"
-if test "x$ac_cv_func_gethostbyname" = xyes; then :
+if test "x$ac_cv_func_gethostbyname" = x""yes; then :
 
 fi
 
 if test $ac_cv_func_gethostbyname = no; then
     { $as_echo "$as_me:${as_lineno-$LINENO}: checking for gethostbyname in -lnsl" >&5
 $as_echo_n "checking for gethostbyname in -lnsl... " >&6; }
-if ${ac_cv_lib_nsl_gethostbyname+:} false; then :
+if test "${ac_cv_lib_nsl_gethostbyname+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
@@ -3935,7 +3927,7 @@ LIBS=$ac_check_lib_save_LIBS
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_nsl_gethostbyname" >&5
 $as_echo "$ac_cv_lib_nsl_gethostbyname" >&6; }
-if test "x$ac_cv_lib_nsl_gethostbyname" = xyes; then :
+if test "x$ac_cv_lib_nsl_gethostbyname" = x""yes; then :
   cat >>confdefs.h <<_ACEOF
 #define HAVE_LIBNSL 1
 _ACEOF
@@ -3946,14 +3938,14 @@ fi
 
 fi
 ac_fn_c_check_func "$LINENO" "connect" "ac_cv_func_connect"
-if test "x$ac_cv_func_connect" = xyes; then :
+if test "x$ac_cv_func_connect" = x""yes; then :
 
 fi
 
 if test $ac_cv_func_connect = no; then
     { $as_echo "$as_me:${as_lineno-$LINENO}: checking for connect in -lsocket" >&5
 $as_echo_n "checking for connect in -lsocket... " >&6; }
-if ${ac_cv_lib_socket_connect+:} false; then :
+if test "${ac_cv_lib_socket_connect+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
@@ -3987,7 +3979,7 @@ LIBS=$ac_check_lib_save_LIBS
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_socket_connect" >&5
 $as_echo "$ac_cv_lib_socket_connect" >&6; }
-if test "x$ac_cv_lib_socket_connect" = xyes; then :
+if test "x$ac_cv_lib_socket_connect" = x""yes; then :
   cat >>confdefs.h <<_ACEOF
 #define HAVE_LIBSOCKET 1
 _ACEOF
@@ -4005,7 +3997,7 @@ fi
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
 $as_echo_n "checking for grep that handles long lines and -e... " >&6; }
-if ${ac_cv_path_GREP+:} false; then :
+if test "${ac_cv_path_GREP+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -z "$GREP"; then
@@ -4068,7 +4060,7 @@ $as_echo "$ac_cv_path_GREP" >&6; }
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
 $as_echo_n "checking for egrep... " >&6; }
-if ${ac_cv_path_EGREP+:} false; then :
+if test "${ac_cv_path_EGREP+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
@@ -4135,7 +4127,7 @@ $as_echo "$ac_cv_path_EGREP" >&6; }
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
 $as_echo_n "checking for ANSI C header files... " >&6; }
-if ${ac_cv_header_stdc+:} false; then :
+if test "${ac_cv_header_stdc+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -4276,7 +4268,8 @@ fi
 done
 
 
-ac_config_files="$ac_config_files Makefile"
+ac_config_files="$ac_config_files Makefile doc/Makefile src/Makefile"
+
 
 cat >confcache <<\_ACEOF
 # This file is a shell script that caches the results of configure
@@ -4342,21 +4335,10 @@ $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
      :end' >>confcache
 if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
   if test -w "$cache_file"; then
-    if test "x$cache_file" != "x/dev/null"; then
+    test "x$cache_file" != "x/dev/null" &&
       { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
 $as_echo "$as_me: updating cache $cache_file" >&6;}
-      if test ! -f "$cache_file" || test -h "$cache_file"; then
-	cat confcache >"$cache_file"
-      else
-        case $cache_file in #(
-        */* | ?:*)
-	  mv -f confcache "$cache_file"$$ &&
-	  mv -f "$cache_file"$$ "$cache_file" ;; #(
-        *)
-	  mv -f confcache "$cache_file" ;;
-	esac
-      fi
-    fi
+    cat confcache >$cache_file
   else
     { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
 $as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
@@ -4408,7 +4390,7 @@ if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 
-: "${CONFIG_STATUS=./config.status}"
+: ${CONFIG_STATUS=./config.status}
 ac_write_fail=0
 ac_clean_files_save=$ac_clean_files
 ac_clean_files="$ac_clean_files $CONFIG_STATUS"
@@ -4509,7 +4491,6 @@ fi
 IFS=" ""	$as_nl"
 
 # Find who we are.  Look in the path if we contain no directory separator.
-as_myself=
 case $0 in #((
   *[\\/]* ) as_myself=$0 ;;
   *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
@@ -4816,8 +4797,8 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 # report actual input values of CONFIG_FILES etc. instead of their
 # values after options handling.
 ac_log="
-This file was extended by fping $as_me 3.0-rc2, which was
-generated by GNU Autoconf 2.68.  Invocation command line was
+This file was extended by fping $as_me 3.1, which was
+generated by GNU Autoconf 2.67.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
   CONFIG_HEADERS  = $CONFIG_HEADERS
@@ -4882,8 +4863,8 @@ _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
 ac_cs_version="\\
-fping config.status 3.0-rc2
-configured by $0, generated by GNU Autoconf 2.68,
+fping config.status 3.1
+configured by $0, generated by GNU Autoconf 2.67,
   with options \\"\$ac_cs_config\\"
 
 Copyright (C) 2010 Free Software Foundation, Inc.
@@ -5014,8 +4995,10 @@ do
     "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
     "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
     "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+    "doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;;
+    "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
 
-  *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+  *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5 ;;
   esac
 done
 
@@ -5038,10 +5021,9 @@ fi
 # after its creation but before its name has been assigned to `$tmp'.
 $debug ||
 {
-  tmp= ac_tmp=
+  tmp=
   trap 'exit_status=$?
-  : "${ac_tmp:=$tmp}"
-  { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
+  { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
 ' 0
   trap 'as_fn_exit 1' 1 2 13 15
 }
@@ -5049,13 +5031,12 @@ $debug ||
 
 {
   tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
-  test -d "$tmp"
+  test -n "$tmp" && test -d "$tmp"
 }  ||
 {
   tmp=./conf$$-$RANDOM
   (umask 077 && mkdir "$tmp")
 } || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
-ac_tmp=$tmp
 
 # Set up the scripts for CONFIG_FILES section.
 # No need to generate them if there are no CONFIG_FILES.
@@ -5077,7 +5058,7 @@ else
   ac_cs_awk_cr=$ac_cr
 fi
 
-echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
+echo 'BEGIN {' >"$tmp/subs1.awk" &&
 _ACEOF
 
 
@@ -5105,7 +5086,7 @@ done
 rm -f conf$$subs.sh
 
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
+cat >>"\$tmp/subs1.awk" <<\\_ACAWK &&
 _ACEOF
 sed -n '
 h
@@ -5153,7 +5134,7 @@ t delim
 rm -f conf$$subs.awk
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 _ACAWK
-cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
+cat >>"\$tmp/subs1.awk" <<_ACAWK &&
   for (key in S) S_is_set[key] = 1
   FS = ""
 
@@ -5185,7 +5166,7 @@ if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
   sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
 else
   cat
-fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
+fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
   || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
 _ACEOF
 
@@ -5219,7 +5200,7 @@ fi # test -n "$CONFIG_FILES"
 # No need to generate them if there are no CONFIG_HEADERS.
 # This happens for instance with `./config.status Makefile'.
 if test -n "$CONFIG_HEADERS"; then
-cat >"$ac_tmp/defines.awk" <<\_ACAWK ||
+cat >"$tmp/defines.awk" <<\_ACAWK ||
 BEGIN {
 _ACEOF
 
@@ -5231,8 +5212,8 @@ _ACEOF
 # handling of long lines.
 ac_delim='%!_!# '
 for ac_last_try in false false :; do
-  ac_tt=`sed -n "/$ac_delim/p" confdefs.h`
-  if test -z "$ac_tt"; then
+  ac_t=`sed -n "/$ac_delim/p" confdefs.h`
+  if test -z "$ac_t"; then
     break
   elif $ac_last_try; then
     as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5
@@ -5333,7 +5314,7 @@ do
   esac
   case $ac_mode$ac_tag in
   :[FHL]*:*);;
-  :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
+  :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5 ;;
   :[FH]-) ac_tag=-:-;;
   :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
   esac
@@ -5352,7 +5333,7 @@ do
     for ac_f
     do
       case $ac_f in
-      -) ac_f="$ac_tmp/stdin";;
+      -) ac_f="$tmp/stdin";;
       *) # Look for the file first in the build tree, then in the source tree
 	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
 	 # because $ac_f cannot contain `:'.
@@ -5361,7 +5342,7 @@ do
 	   [\\/$]*) false;;
 	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
 	   esac ||
-	   as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+	   as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5 ;;
       esac
       case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
       as_fn_append ac_file_inputs " '$ac_f'"
@@ -5387,8 +5368,8 @@ $as_echo "$as_me: creating $ac_file" >&6;}
     esac
 
     case $ac_tag in
-    *:-:* | *:-) cat >"$ac_tmp/stdin" \
-      || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
+    *:-:* | *:-) cat >"$tmp/stdin" \
+      || as_fn_error $? "could not create $ac_file" "$LINENO" 5  ;;
     esac
     ;;
   esac
@@ -5524,22 +5505,21 @@ s&@INSTALL@&$ac_INSTALL&;t t
 s&@MKDIR_P@&$ac_MKDIR_P&;t t
 $ac_datarootdir_hack
 "
-eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
-  >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \
+  || as_fn_error $? "could not create $ac_file" "$LINENO" 5
 
 test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
-  { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
-  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' \
-      "$ac_tmp/out"`; test -z "$ac_out"; } &&
+  { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
+  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
   { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
 which seems to be undefined.  Please make sure it is defined" >&5
 $as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
 which seems to be undefined.  Please make sure it is defined" >&2;}
 
-  rm -f "$ac_tmp/stdin"
+  rm -f "$tmp/stdin"
   case $ac_file in
-  -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
-  *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
+  -) cat "$tmp/out" && rm -f "$tmp/out";;
+  *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
   esac \
   || as_fn_error $? "could not create $ac_file" "$LINENO" 5
  ;;
@@ -5550,20 +5530,20 @@ which seems to be undefined.  Please make sure it is defined" >&2;}
   if test x"$ac_file" != x-; then
     {
       $as_echo "/* $configure_input  */" \
-      && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs"
-    } >"$ac_tmp/config.h" \
+      && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs"
+    } >"$tmp/config.h" \
       || as_fn_error $? "could not create $ac_file" "$LINENO" 5
-    if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then
+    if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then
       { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
 $as_echo "$as_me: $ac_file is unchanged" >&6;}
     else
       rm -f "$ac_file"
-      mv "$ac_tmp/config.h" "$ac_file" \
+      mv "$tmp/config.h" "$ac_file" \
 	|| as_fn_error $? "could not create $ac_file" "$LINENO" 5
     fi
   else
     $as_echo "/* $configure_input  */" \
-      && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \
+      && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \
       || as_fn_error $? "could not create -" "$LINENO" 5
   fi
 # Compute "$ac_file"'s index in $config_headers.
@@ -5742,4 +5722,3 @@ if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
 $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
 fi
 
-

configure.in

@@ -3,10 +3,10 @@ dnl Process this file with autoconf to produce a configure script.
 dnl Minimum Autoconf version required.
 AC_PREREQ(2.59)
 
-AC_INIT([fping],[3.0-rc2])
+AC_INIT([fping],[3.1])
 
 AC_CANONICAL_TARGET
-AM_INIT_AUTOMAKE
+AM_INIT_AUTOMAKE([foreign])
 AM_MAINTAINER_MODE
 
 AC_CONFIG_HEADERS([config.h])
@@ -47,5 +47,8 @@ AH_BOTTOM([
 dnl Checks for header files.
 AC_CHECK_HEADERS(unistd.h sys/file.h stdlib.h sys/select.h)
 
-AC_OUTPUT(Makefile)
+AC_CONFIG_FILES([Makefile
+                 doc/Makefile
+                 src/Makefile])
 
+AC_OUTPUT

doc/Makefile.am

@@ -0,0 +1,2 @@
+man_MANS = fping.8
+EXTRA_DIST = $(man_MANS)

doc/Makefile.in

@@ -0,0 +1,413 @@
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+target_triplet = @target@
+subdir = doc
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+SOURCES =
+DIST_SOURCES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+man8dir = $(mandir)/man8
+am__installdirs = "$(DESTDIR)$(man8dir)"
+NROFF = nroff
+MANS = $(man_MANS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target = @target@
+target_alias = @target_alias@
+target_cpu = @target_cpu@
+target_os = @target_os@
+target_vendor = @target_vendor@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+man_MANS = fping.8
+EXTRA_DIST = $(man_MANS)
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign doc/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-man8: $(man_MANS)
+	@$(NORMAL_INSTALL)
+	test -z "$(man8dir)" || $(MKDIR_P) "$(DESTDIR)$(man8dir)"
+	@list=''; test -n "$(man8dir)" || exit 0; \
+	{ for i in $$list; do echo "$$i"; done; \
+	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+	  sed -n '/\.8[a-z]*$$/p'; \
+	} | while read p; do \
+	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; echo "$$p"; \
+	done | \
+	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+	sed 'N;N;s,\n, ,g' | { \
+	list=; while read file base inst; do \
+	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
+	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
+	  fi; \
+	done; \
+	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+	while read files; do \
+	  test -z "$$files" || { \
+	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
+	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
+	done; }
+
+uninstall-man8:
+	@$(NORMAL_UNINSTALL)
+	@list=''; test -n "$(man8dir)" || exit 0; \
+	files=`{ for i in $$list; do echo "$$i"; done; \
+	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+	  sed -n '/\.8[a-z]*$$/p'; \
+	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+	test -z "$$files" || { \
+	  echo " ( cd '$(DESTDIR)$(man8dir)' && rm -f" $$files ")"; \
+	  cd "$(DESTDIR)$(man8dir)" && rm -f $$files; }
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+
+distdir: $(DISTFILES)
+	@list='$(MANS)'; if test -n "$$list"; then \
+	  list=`for p in $$list; do \
+	    if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+	    if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
+	  if test -n "$$list" && \
+	    grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
+	    echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
+	    grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/         /' >&2; \
+	    echo "       to fix them, install help2man, remove and regenerate the man pages;" >&2; \
+	    echo "       typically \`make maintainer-clean' will remove them" >&2; \
+	    exit 1; \
+	  else :; fi; \
+	else :; fi
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(MANS)
+installdirs:
+	for dir in "$(DESTDIR)$(man8dir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-man
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man: install-man8
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-man
+
+uninstall-man: uninstall-man8
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am check check-am clean clean-generic distclean \
+	distclean-generic distdir dvi dvi-am html html-am info info-am \
+	install install-am install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-man8 install-pdf install-pdf-am install-ps \
+	install-ps-am install-strip installcheck installcheck-am \
+	installdirs maintainer-clean maintainer-clean-generic \
+	mostlyclean mostlyclean-generic pdf pdf-am ps ps-am uninstall \
+	uninstall-am uninstall-man uninstall-man8
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

doc/README.1992

@@ -0,0 +1,43 @@
+Original README (from 1992)
+
+        fping - A tool to quickly ping N number of hosts to determine
+        their reachability.
+
+             Roland J. Schemers III - Stanford University
+                   schemers@Stanford.EDU
+
+      fping is a ping(1) like program which uses the Internet Control
+      Message Protocol (ICMP) echo request to determine if a host is
+      up. fping is different from ping in that you can specify any
+      number of hosts on the command line, or specify a file containing
+      the lists of hosts to ping. Instead of trying one host until it
+      timeouts or replies, fping will send out a ping packet and move
+      on to the next host in a round-robin fashion. If a host replies,
+      it is noted and removed from the list of hosts to check. If a host
+      does not respond within a certain time limit and/or retry limit it 
+      will be considered unreachable. 
+
+Site
+      Stanford University has a large TCP/IP network with over 16,000 
+      assigned IP addresses and over 100 IP subnets.
+
+Problem and Issues
+
+      With a large a number of IP addresses in use, its becomes more and
+      more time consuming to check on which IP addresses are actively
+      in use, and which critical machines (routers, bridges, servers, etc)
+      are reachable. One example is we have a program which goes through
+      all of our routers arp caches looking for IP addresses that are in 
+      use. After finding a list of IP addresses that aren't in any arp
+      caches fping can then be used to see if these IP addresses really
+      aren't being used, or are just behind the routers. Checking 2500
+      hosts (99% of which are unreachable) via ping can take hours.
+       
+      fping was written to solve the problem of pinging N number of hosts
+      in an efficient manner. By sending out pings in a round-robin fashion
+      and checking on responses as they come in at random, a large number of 
+      hosts can be checked at once.
+
+      Unlike ping, fping is meant to be used in scripts and its
+      output is easy to parse.
+

doc/fping.8

@@ -1,227 +1,225 @@
-.TH fping 8
-.SH NAME
-fping \- send ICMP ECHO_REQUEST packets to network hosts
-.SH SYNOPSIS
-.B fping
-[ \fIoptions\fR ]
-[ \fIsystems...\fR ]
-
-.SH DESCRIPTION
-.NXR "fping command"
-.NXR "ICMP ECHO_REQUEST"
-
-      
-.B fping 
-is a program like
-.B ping(8)
-which uses the Internet Control
-Message Protocol (ICMP) echo request to determine if a target host is
-responding. 
-.B fping 
-differs from ping in that you can specify any
-number of targets on the command line, or specify a file containing
-the lists of targets to ping. Instead of sending to one target until it
-times out or replies, 
-.B fping 
-will send out a ping packet and move
-on to the next target in a round-robin fashion. 
-.PP
-In the default mode, if a target replies,
-it is noted and removed from the list of targets to check; if a target
-does not respond within a certain time limit and/or retry limit it 
-is designated as unreachable.  
-.B fping 
-also supports sending a specified number of pings to a target, or
-looping indefinitely (as in 
-.B ping
-).
-.PP
-Unlike 
-.B ping,
-.B fping 
-is meant to be used in scripts, so its output is designed to be 
-easy to parse.
-.SH OPTIONS
-.IP \fB-a\fR 5
-Show systems that are alive.
-.IP \fB-A\fR 5
-Display targets by address rather than DNS name.
-.IP \fB-b\fIn\fR 5
-Number of bytes of ping data to send.  The minimum size (normally 12)
-allows room for the data that 
-.B fping 
-needs to do its work (sequence number, timestamp).  The reported
-received data size includes the IP header (normally 20 bytes) and ICMP
-header (8 bytes), so the minimum total size is 40 bytes.  Default is
-56, as in 
-.B ping.
-Maximum is the theoretical maximum IP datagram size (64K), though most
-systems limit this to a smaller, system-dependent number.
-.IP \fB-B\fIn\fR 5
-In the default mode,
-.B fping
-sends several requests to a target before giving up, waiting longer for
-a reply on each successive request.  This parameter is the value by
-which the wait time is multiplied on each successive request; it must
-be entered as a floating-point number (x.y).  The default is 1.5.
-.IP \fB-c\fR 5
-Number of request packets to send to each target.  In this mode, a
-line is displayed for each received response (this can suppressed with
--q or -Q).  Also, statistics about responses for each target are displayed
-when all requests have been sent (or when interrupted).
-.IP \fB-C\fR 5
-Similar to -c, but the per-target statistics are displayed in a format
-designed for automated response-time statistics gathering.  For
-example:
-
-% fping -C 5 -q somehost
-
-somehost : 91.7 37.0 29.2 - 36.8
-
-shows the response time in milliseconds for each of the five requests,
-with the "-" indicating that no response was received to the fourth
-request.
-.IP \fB-d\fR 5
-Use DNS to lookup address of return ping packet. This allows you to give
-fping a list of IP addresses as input and print hostnames in the output.
-.IP \fB-e\fR 5
-Show elapsed (round-trip) time of packets.
-.IP \fB-f\fR 5
-Read list of targets from a file.  This option can only be used by the
-root user.  Regular users should pipe in the file via stdin:
-
-% fping < targets_file
-
-.IP \fB-g\fR 5
-Generate a target list from a supplied IP netmask, or a starting and ending IP.
-Specify the netmask or start/end in the targets portion of the command line.
-
-ex. To ping the class C 192.168.1.x, the specified command line could look like either:
-
-fping -g 192.168.1.0/24
-
-or
-
-fping -g 192.168.1.0 192.168.1.255
-.IP \fB-h\fR 5
-Print usage message.
-.IP \fB-i\fIn\fR 5
-The minimum amount of time (in milliseconds) between sending a ping packet to any target (default is 25).
-.IP \fB-l\fR 5
-Loop sending packets to each target indefinitely.  Can be interrupted
-with ctl-C; statistics about responses for each target are then displayed.
-.IP \fB-m\fR 5
-Send pings to each of a target host's multiple interfaces.
-.IP \fB-n\fR 5
-Same as -d.
-.IP \fB-p\fR 5
-In looping or counting modes (-l, -c, or -C), this parameter sets the
-time in milliseconds that
-.B fping
-waits between successive packets to an individual target.  Default is
-1000.
-.IP \fB-q\fR 5
-Quiet. Don't show per-target results, just set final exit status.
-.IP \fB-Q\fIn\fR 5
-Like -q, but show summary results every n seconds.
-.IP \fB-r\fIn\fR 5
-Retry limit (default 3). This is the number of times an attempt at pinging
-a target will be made, not including the first try.
-.IP \fB-s\fR 5
-Print cumulative statistics upon exit.
-.IP \fB-S\fIaddr\fR 5
-Set source address.
-.IP \fB-I\fIif\fR 5
-Set the interface (requires SO_BINDTODEVICE support)
-.IP \fB-t\fIn\fR 5
-Initial target timeout in milliseconds (default 500). In the default
-mode, this is the amount of time that 
-.B fping
-waits for a response to its first request.  Successive timeouts are
-multiplied by the backoff factor.
-.IP \fB-T\fIn\fR 5
-Select timeout in seconds (default 10).
-.IP \fB-u\fR 5
-Show targets that are unreachable.
-.IP \fB-T\fIn\fR 5
-Set the typ of service flag (TOS). \fIn\fR can be either decimal or hexadecimal (0xh) format.
-.IP \fB-v\fR 5
-Print 
-.B fping
-version information.
-
-.SH EXAMPLES
-The following perl script will check a list of hosts and send mail if
-any are unreachable. It uses the open2 function which allows a program
-to be opened for reading and writing. fping does not start pinging the
-list of systems until it reads EOF, which it gets after INPUT is closed. 
-Sure the open2 usage is not needed in this example, but it's a good open2
-example none the less. 
-.nf
-
-#!/usr/bin/perl
-require 'open2.pl';
-
-$MAILTO = "root";
-
-$pid = &open2("OUTPUT","INPUT","/usr/local/bin/fping -u");
-
-@check=("slapshot","foo","foobar");
-
-foreach(@check) {  print INPUT "$_\\n"; }
-close(INPUT);
-@output=<OUTPUT>;
-
-if ($#output != -1) {
- chop($date=`date`);
- open(MAIL,"|mail -s 'unreachable systems' $MAILTO");
- print MAIL "\\nThe following systems are unreachable as of: $date\\n\\n";
- print MAIL @output;
- close MAIL;
-}
-
-.ni
-Another good example is when you want to perform an action only on hosts
-that are currently reachable.
-.nf
-
-#!/usr/bin/perl
-
-$hosts_to_backup = `cat /etc/hosts.backup | fping -a`;
-
-foreach $host (split(/\\n/,$hosts_to_backup)) {
-  # do it
-}
-
-.ni
-
-.SH AUTHORS
-.nf
-Roland J. Schemers III, Stanford University, concept and versions 1.x
-RL "Bob" Morgan, Stanford University, versions 2.x
-David Papp, versions 2.3x and up,
-fping website:  http://www.fping.com
-.ni
-.SH DIAGNOSTICS
-Exit status is 0 if all the hosts are reachable, 1 if some hosts were
-unreachable, 2 if any IP addresses were not found, 3 for invalid
-command line arguments, and 4 for a system call failure.
-.SH BUGS
-Ha! If we knew of any we would have fixed them!
-.SH RESTRICTIONS
-If certain options are used (i.e, a low value for -i and -t, and a 
-high value for -r) it is possible to flood the network. This program
-must be installed as setuid root in order to open up a raw socket,
-or must be run by root. In order to stop mere mortals from hosing the
-network (when fping is installed setuid root) , normal users can't specify 
-the following:
-.nf
-
- -i n   where n < 10  msec
- -r n   where n > 20
- -t n   where n < 250 msec
-
-.ni
-.SH SEE ALSO
-netstat(1), ping(8), ifconfig(8c)
-
+.TH fping 8
+.SH NAME
+fping \- send ICMP ECHO_REQUEST packets to network hosts
+.SH SYNOPSIS
+.B fping
+[ \fIoptions\fR ]
+[ \fIsystems...\fR ]
+
+.SH DESCRIPTION
+.B fping
+is a program like
+.B ping(8)
+which uses the Internet Control
+Message Protocol (ICMP) echo request to determine if a target host is
+responding.
+.B fping
+differs from ping in that you can specify any
+number of targets on the command line, or specify a file containing
+the lists of targets to ping. Instead of sending to one target until it
+times out or replies,
+.B fping
+will send out a ping packet and move
+on to the next target in a round-robin fashion.
+.PP
+In the default mode, if a target replies,
+it is noted and removed from the list of targets to check; if a target
+does not respond within a certain time limit and/or retry limit it
+is designated as unreachable.
+.B fping
+also supports sending a specified number of pings to a target, or
+looping indefinitely (as in
+.B ping
+).
+.PP
+Unlike
+.B ping,
+.B fping
+is meant to be used in scripts, so its output is designed to be
+easy to parse.
+.SH OPTIONS
+.IP \fB\-a\fR 5
+Show systems that are alive.
+.IP \fB\-A\fR 5
+Display targets by address rather than DNS name.
+.IP \fB\-b\fIn\fR 5
+Number of bytes of ping data to send.  The minimum size (normally 12)
+allows room for the data that
+.B fping
+needs to do its work (sequence number, timestamp).  The reported
+received data size includes the IP header (normally 20 bytes) and ICMP
+header (8 bytes), so the minimum total size is 40 bytes.  Default is
+56, as in
+.B ping.
+Maximum is the theoretical maximum IP datagram size (64K), though most
+systems limit this to a smaller, system-dependent number.
+.IP \fB\-B\fIn\fR 5
+In the default mode,
+.B fping
+sends several requests to a target before giving up, waiting longer for
+a reply on each successive request.  This parameter is the value by
+which the wait time is multiplied on each successive request; it must
+be entered as a floating-point number (x.y).  The default is 1.5.
+.IP \fB\-c\fR 5
+Number of request packets to send to each target.  In this mode, a
+line is displayed for each received response (this can suppressed with
+\-q or \-Q).  Also, statistics about responses for each target are displayed
+when all requests have been sent (or when interrupted).
+.IP \fB-C\fR 5
+Similar to \-c, but the per-target statistics are displayed in a format
+designed for automated response-time statistics gathering.  For
+example:
+
+% fping \-C 5 \-q somehost
+
+somehost : 91.7 37.0 29.2 \- 36.8
+
+shows the response time in milliseconds for each of the five requests,
+with the "\-" indicating that no response was received to the fourth
+request.
+.IP \fB\-d\fR 5
+Use DNS to lookup address of return ping packet. This allows you to give
+fping a list of IP addresses as input and print hostnames in the output.
+.IP \fB\-e\fR 5
+Show elapsed (round-trip) time of packets.
+.IP \fB\-f\fR 5
+Read list of targets from a file.  This option can only be used by the
+root user.  Regular users should pipe in the file via stdin:
+
+% fping < targets_file
+
+.IP \fB\-g\fR 5
+Generate a target list from a supplied IP netmask, or a starting and ending IP.
+Specify the netmask or start/end in the targets portion of the command line.
+
+ex. To ping the class C 192.168.1.x, the specified command line could look like either:
+
+fping \-g 192.168.1.0/24
+
+or
+
+fping -g 192.168.1.0 192.168.1.255
+.IP \fB\-h\fR 5
+Print usage message.
+.IP \fB\-i\fIn\fR 5
+The minimum amount of time (in milliseconds) between sending a ping packet to any target (default is 25).
+.IP \fB\-l\fR 5
+Loop sending packets to each target indefinitely.  Can be interrupted
+with Ctrl-C; statistics about responses for each target are then displayed.
+.IP \fB\-m\fR 5
+Send pings to each of a target host's multiple interfaces.
+.IP \fB\-n\fR 5
+Same as \-d.
+.IP \fB\-p\fR 5
+In looping or counting modes (\-l, \-c, or \-C), this parameter sets the
+time in milliseconds that
+.B fping
+waits between successive packets to an individual target.  Default is
+1000.
+.IP \fB\-q\fR 5
+Quiet. Don't show per-target results, just set final exit status.
+.IP \fB\-Q\fIn\fR 5
+Like \-q, but show summary results every n seconds.
+.IP \fB\-r\fIn\fR 5
+Retry limit (default 3). This is the number of times an attempt at pinging
+a target will be made, not including the first try.
+.IP \fB\-s\fR 5
+Print cumulative statistics upon exit.
+.IP \fB\-S\fIaddr\fR 5
+Set source address.
+.IP \fB\-I\fIif\fR 5
+Set the interface (requires SO_BINDTODEVICE support)
+.IP \fB\-t\fIn\fR 5
+Initial target timeout in milliseconds (default 500). In the default
+mode, this is the amount of time that
+.B fping
+waits for a response to its first request.  Successive timeouts are
+multiplied by the backoff factor.
+.IP \fB\-T\fIn\fR 5
+Ignored (for compatibility with fping 2.4).
+.IP \fB\-u\fR 5
+Show targets that are unreachable.
+.IP \fB\-T\fIn\fR 5
+Set the typ of service flag (TOS). \fIn\fR can be either decimal or hexadecimal (0xh) format.
+.IP \fB\-v\fR 5
+Print
+.B fping
+version information.
+.IP \fB-H\fIn\fR 5
+Set the IP TTL field (time to live hops).
+
+.SH EXAMPLES
+The following perl script will check a list of hosts and send mail if
+any are unreachable. It uses the open2 function which allows a program
+to be opened for reading and writing. fping does not start pinging the
+list of systems until it reads EOF, which it gets after INPUT is closed.
+Sure the open2 usage is not needed in this example, but it's a good open2
+example none the less.
+.nf
+
+#!/usr/bin/perl
+require 'open2.pl';
+
+$MAILTO = "root";
+
+$pid = &open2("OUTPUT","INPUT","/usr/local/bin/fping -u");
+
+@check=("slapshot","foo","foobar");
+
+foreach(@check) {  print INPUT "$_\\n"; }
+close(INPUT);
+@output=<OUTPUT>;
+
+if ($#output != -1) {
+ chop($date=`date`);
+ open(MAIL,"|mail -s 'unreachable systems' $MAILTO");
+ print MAIL "\\nThe following systems are unreachable as of: $date\\n\\n";
+ print MAIL @output;
+ close MAIL;
+}
+
+.fi
+Another good example is when you want to perform an action only on hosts
+that are currently reachable.
+.nf
+
+#!/usr/bin/perl
+
+$hosts_to_backup = `cat /etc/hosts.backup | fping -a`;
+
+foreach $host (split(/\\n/,$hosts_to_backup)) {
+  # do it
+}
+
+.fi
+
+.SH AUTHORS
+.nf
+Roland J. Schemers III, Stanford University, concept and versions 1.x
+RL "Bob" Morgan, Stanford University, versions 2.x
+David Papp, versions 2.3x and up,
+David Schweikert, versions 3.0 and up
+fping website:  http://www.fping.org
+.fi
+.SH DIAGNOSTICS
+Exit status is 0 if all the hosts are reachable, 1 if some hosts were
+unreachable, 2 if any IP addresses were not found, 3 for invalid
+command line arguments, and 4 for a system call failure.
+.SH BUGS
+Ha! If we knew of any we would have fixed them!
+.SH RESTRICTIONS
+If certain options are used (i.e, a low value for \-i and \-t, and a
+high value for \-r) it is possible to flood the network. This program
+must be installed as setuid root in order to open up a raw socket,
+or must be run by root. In order to stop mere mortals from hosing the
+network (when fping is installed setuid root) , normal users can't specify
+the following:
+.nf
+
+ -i n   where n < 10  msec
+ -r n   where n > 20
+ -t n   where n < 250 msec
+
+.fi
+.SH SEE ALSO
+netstat(1), ping(8), ifconfig(8c)

linux.h

@@ -1,133 +0,0 @@
-/*
-** Special compatibility definitions for linux.
-**
-**	On the linux platform, several IP-related structures have
-**	different names. Also some of the structure fields have
-**	other names, although the layout is (obviously) fixed.
-**	Several constants are not defined in the standard files.
-**
-**	@(#)linux.h             e07@nikhef.nl (Eric Wassenaar) 960301
-*/
-
-#if defined(linux)
-
-#include <endian.h>		/* to get the proper BYTE_ORDER */
-
-#if !defined(BYTE_ORDER) || (BYTE_ORDER != BIG_ENDIAN && \
-     BYTE_ORDER != LITTLE_ENDIAN && BYTE_ORDER != PDP_ENDIAN)
-error "Undefined or invalid BYTE_ORDER";
-#endif
-
-/*
- * Structure of an ip header, without options.
- */
-
-#define	IPVERSION	4
-
-struct ip {
-#if (BYTE_ORDER == LITTLE_ENDIAN || BYTE_ORDER == PDP_ENDIAN)
-	u_char	ip_hl:4,		/* header length */
-		ip_v:4;			/* version */
-#else
-	u_char	ip_v:4,			/* version */
-		ip_hl:4;		/* header length */
-#endif
-	u_char	ip_tos;			/* type of service */
-	short	ip_len;			/* total length */
-	u_short	ip_id;			/* identification */
-	short	ip_off;			/* fragment offset field */
-#define	IP_DF 0x4000			/* dont fragment flag */
-#define	IP_MF 0x2000			/* more fragments flag */
-	u_char	ip_ttl;			/* time to live */
-	u_char	ip_p;			/* protocol */
-	u_short	ip_sum;			/* checksum */
-	struct	in_addr ip_src,ip_dst;	/* source and dest address */
-};
-
-#define	IP_MAXPACKET	65535		/* maximum packet size */
-
-/*
- * Structure of an icmp header.
- */
-
-struct icmp {
-	u_char	icmp_type;		/* type of message, see below */
-	u_char	icmp_code;		/* type sub code */
-	u_short	icmp_cksum;		/* ones complement cksum of struct */
-	union {
-		u_char ih_pptr;			/* ICMP_PARAMPROB */
-		struct in_addr ih_gwaddr;	/* ICMP_REDIRECT */
-		struct ih_idseq {
-			n_short	icd_id;
-			n_short	icd_seq;
-		} ih_idseq;
-		int ih_void;
-	} icmp_hun;
-#define	icmp_pptr	icmp_hun.ih_pptr
-#define	icmp_gwaddr	icmp_hun.ih_gwaddr
-#define	icmp_id		icmp_hun.ih_idseq.icd_id
-#define	icmp_seq	icmp_hun.ih_idseq.icd_seq
-#define	icmp_void	icmp_hun.ih_void
-	union {
-		struct id_ts {
-			n_time its_otime;
-			n_time its_rtime;
-			n_time its_ttime;
-		} id_ts;
-		struct id_ip  {
-			struct ip idi_ip;
-			/* options and then 64 bits of data */
-		} id_ip;
-		u_long	id_mask;
-		char	id_data[1];
-	} icmp_dun;
-#define	icmp_otime	icmp_dun.id_ts.its_otime
-#define	icmp_rtime	icmp_dun.id_ts.its_rtime
-#define	icmp_ttime	icmp_dun.id_ts.its_ttime
-#define	icmp_ip		icmp_dun.id_ip.idi_ip
-#define	icmp_mask	icmp_dun.id_mask
-#define	icmp_data	icmp_dun.id_data
-};
-
-#define	ICMP_MINLEN	8		/* abs minimum */
-
-/*
- * Definition of icmp type and code field values.
- */
-
-#define	ICMP_ECHOREPLY		0		/* echo reply */
-#define	ICMP_UNREACH		3		/* dest unreachable, codes: */
-#define		ICMP_UNREACH_NET	0		/* bad net */
-#define		ICMP_UNREACH_HOST	1		/* bad host */
-#define		ICMP_UNREACH_PROTOCOL	2		/* bad protocol */
-#define		ICMP_UNREACH_PORT	3		/* bad port */
-#define		ICMP_UNREACH_NEEDFRAG	4		/* IP_DF caused drop */
-#define		ICMP_UNREACH_SRCFAIL	5		/* src route failed */
-#define	ICMP_SOURCEQUENCH	4		/* packet lost, slow down */
-#define	ICMP_REDIRECT		5		/* shorter route, codes: */
-#define		ICMP_REDIRECT_NET	0		/* for network */
-#define		ICMP_REDIRECT_HOST	1		/* for host */
-#define		ICMP_REDIRECT_TOSNET	2		/* for tos and net */
-#define		ICMP_REDIRECT_TOSHOST	3		/* for tos and host */
-#define	ICMP_ECHO		8		/* echo service */
-#define	ICMP_TIMXCEED		11		/* time exceeded, code: */
-#define		ICMP_TIMXCEED_INTRANS	0		/* ttl==0 in transit */
-#define		ICMP_TIMXCEED_REASS	1		/* ttl==0 in reass */
-#define	ICMP_PARAMPROB		12		/* ip header bad */
-#define	ICMP_TSTAMP		13		/* timestamp request */
-#define	ICMP_TSTAMPREPLY	14		/* timestamp reply */
-#define	ICMP_IREQ		15		/* information request */
-#define	ICMP_IREQREPLY		16		/* information reply */
-#define	ICMP_MASKREQ		17		/* address mask request */
-#define	ICMP_MASKREPLY		18		/* address mask reply */
-
-/*
- * Definitions needed for the udp header structure.
- */
-
-#define uh_sport	source
-#define uh_dport	dest
-#define uh_ulen		len
-#define uh_sum		check
-
-#endif /* linux */

src/Makefile.am

@@ -0,0 +1,3 @@
+sbin_PROGRAMS = fping
+fping_SOURCES = fping.c options.h
+fping_DEPENDENCIES = ../config.h

src/Makefile.in

@@ -0,0 +1,466 @@
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+target_triplet = @target@
+sbin_PROGRAMS = fping$(EXEEXT)
+subdir = src
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(sbindir)"
+PROGRAMS = $(sbin_PROGRAMS)
+am_fping_OBJECTS = fping.$(OBJEXT)
+fping_OBJECTS = $(am_fping_OBJECTS)
+fping_LDADD = $(LDADD)
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+SOURCES = $(fping_SOURCES)
+DIST_SOURCES = $(fping_SOURCES)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target = @target@
+target_alias = @target_alias@
+target_cpu = @target_cpu@
+target_os = @target_os@
+target_vendor = @target_vendor@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+fping_SOURCES = fping.c options.h
+fping_DEPENDENCIES = ../config.h
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .o .obj
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign src/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-sbinPROGRAMS: $(sbin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	test -z "$(sbindir)" || $(MKDIR_P) "$(DESTDIR)$(sbindir)"
+	@list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p; \
+	  then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	      echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
+	      $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
+	    } \
+	; done
+
+uninstall-sbinPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' `; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(sbindir)" && rm -f $$files
+
+clean-sbinPROGRAMS:
+	-test -z "$(sbin_PROGRAMS)" || rm -f $(sbin_PROGRAMS)
+fping$(EXEEXT): $(fping_OBJECTS) $(fping_DEPENDENCIES) 
+	@rm -f fping$(EXEEXT)
+	$(LINK) $(fping_OBJECTS) $(fping_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fping.Po@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(COMPILE) -c $<
+
+.c.obj:
+@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	set x; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: CTAGS
+CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(PROGRAMS)
+installdirs:
+	for dir in "$(DESTDIR)$(sbindir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-sbinPROGRAMS mostlyclean-am
+
+distclean: distclean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-sbinPROGRAMS
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-sbinPROGRAMS
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
+	clean-sbinPROGRAMS ctags distclean distclean-compile \
+	distclean-generic distclean-tags distdir dvi dvi-am html \
+	html-am info info-am install install-am install-data \
+	install-data-am install-dvi install-dvi-am install-exec \
+	install-exec-am install-html install-html-am install-info \
+	install-info-am install-man install-pdf install-pdf-am \
+	install-ps install-ps-am install-sbinPROGRAMS install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \
+	uninstall-am uninstall-sbinPROGRAMS
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

src/test-c89.sh

@@ -0,0 +1 @@
+gcc -DHAVE_CONFIG_H -D_BSD_SOURCE -D_POSIX_SOURCE -I.. -Wall -std=c89 -pedantic -c -o fping.o fping.c

stamp-h.in

@@ -1 +0,0 @@
-timestamp